Hi Alex,
On 10/9/20 3:45 PM, Alexandre Courbot wrote:
> On Tue, Sep 29, 2020 at 1:44 AM Stanimir Varbanov
> <stanimir.varba...@linaro.org> wrote:
>>
>> In real use of dynamic-resolution-change it is observed that the
>> LAST buffer flag (which marks the last decoded buffer with the
>> resolution before the resolution-change event) is not reliably set.
>>
>> Fix this by set the LAST buffer flag on next queued capture buffer
>> after the resolution-change event.
>>
>> Signed-off-by: Stanimir Varbanov <stanimir.varba...@linaro.org>
>> ---
>> drivers/media/platform/qcom/venus/core.h | 5 +-
>> drivers/media/platform/qcom/venus/helpers.c | 6 +++
>> drivers/media/platform/qcom/venus/vdec.c | 52 ++++++++++++---------
>> 3 files changed, 38 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/media/platform/qcom/venus/core.h
>> b/drivers/media/platform/qcom/venus/core.h
>> index 7b79a33dc9d6..e30eeaf0ada9 100644
>> --- a/drivers/media/platform/qcom/venus/core.h
>> +++ b/drivers/media/platform/qcom/venus/core.h
>> @@ -274,7 +274,6 @@ enum venus_dec_state {
>> VENUS_DEC_STATE_DRAIN = 5,
>> VENUS_DEC_STATE_DECODING = 6,
>> VENUS_DEC_STATE_DRC = 7,
>> - VENUS_DEC_STATE_DRC_FLUSH_DONE = 8,
>> };
>>
>> struct venus_ts_metadata {
>> @@ -339,7 +338,7 @@ struct venus_ts_metadata {
>> * @priv: a private for HFI operations callbacks
>> * @session_type: the type of the session (decoder or encoder)
>> * @hprop: a union used as a holder by get property
>> - * @last_buf: last capture buffer for dynamic-resoluton-change
>> + * @next_buf_last: a flag to mark next queued capture buffer as last
>> */
>> struct venus_inst {
>> struct list_head list;
>> @@ -401,7 +400,7 @@ struct venus_inst {
>> union hfi_get_property hprop;
>> unsigned int core_acquired: 1;
>> unsigned int bit_depth;
>> - struct vb2_buffer *last_buf;
>> + bool next_buf_last;
>> };
>>
>> #define IS_V1(core) ((core)->res->hfi_version == HFI_VERSION_1XX)
>> diff --git a/drivers/media/platform/qcom/venus/helpers.c
>> b/drivers/media/platform/qcom/venus/helpers.c
>> index 50439eb1ffea..5ca3920237c5 100644
>> --- a/drivers/media/platform/qcom/venus/helpers.c
>> +++ b/drivers/media/platform/qcom/venus/helpers.c
>> @@ -1347,6 +1347,12 @@ void venus_helper_vb2_buf_queue(struct vb2_buffer *vb)
>>
>> v4l2_m2m_buf_queue(m2m_ctx, vbuf);
>>
>> + /* Skip processing queued capture buffers after LAST flag */
>> + if (inst->session_type == VIDC_SESSION_TYPE_DEC &&
>> + V4L2_TYPE_IS_CAPTURE(vb->vb2_queue->type) &&
>> + inst->codec_state == VENUS_DEC_STATE_DRC)
>> + goto unlock;
>> +
>> cache_payload(inst, vb);
>>
>> if (inst->session_type == VIDC_SESSION_TYPE_ENC &&
>> diff --git a/drivers/media/platform/qcom/venus/vdec.c
>> b/drivers/media/platform/qcom/venus/vdec.c
>> index ea13170a6a2c..c11bdf3ca21b 100644
>> --- a/drivers/media/platform/qcom/venus/vdec.c
>> +++ b/drivers/media/platform/qcom/venus/vdec.c
>> @@ -914,10 +914,6 @@ static int vdec_start_capture(struct venus_inst *inst)
>> return 0;
>>
>> reconfigure:
>> - ret = hfi_session_flush(inst, HFI_FLUSH_OUTPUT, true);
>> - if (ret)
>> - return ret;
>> -
>> ret = vdec_output_conf(inst);
>> if (ret)
>> return ret;
>> @@ -954,6 +950,7 @@ static int vdec_start_capture(struct venus_inst *inst)
>> inst->streamon_cap = 1;
>> inst->sequence_cap = 0;
>> inst->reconfig = false;
>> + inst->next_buf_last = false;
>
> Is this needed? Whether a resolution change occurs should only be
> dependent on what the OUTPUT queue receives, so even if the CAPTURE
> queue is stopped and resumed for some reason, pending resolution
> change events and their associated LAST buffer should still be
> emitted. With this statement we are taking the risk of sending a
> change resolution event without a corresponding LAST buffer (so the
> following LAST buffer might be misinterpreted).
I added it in start_capture just to be sure that the flag is reset
before we resume decoding on new resolution. Also, I don't expect any
source change events from firmware before we call hfi_session_continue.
So I guess this flag should be reset before hfi_session_continue.
>
>>
>> return 0;
>>
>> @@ -985,6 +982,7 @@ static int vdec_start_output(struct venus_inst *inst)
>> venus_helper_init_instance(inst);
>> inst->sequence_out = 0;
>> inst->reconfig = false;
>> + inst->next_buf_last = false;
>
> This one I understand better - if the client seeks, it should probably
> check for pending events before resuming.
On second thought I think it shouldn't be here - the last buffer flag is
a property of the capture queue.
>
>>
>> ret = vdec_set_properties(inst);
>> if (ret)
>> @@ -1078,9 +1076,7 @@ static int vdec_stop_capture(struct venus_inst *inst)
>> inst->codec_state = VENUS_DEC_STATE_STOPPED;
>> break;
>> case VENUS_DEC_STATE_DRC:
>> - WARN_ON(1);
>> - fallthrough;
>> - case VENUS_DEC_STATE_DRC_FLUSH_DONE:
>> + ret = hfi_session_flush(inst, HFI_FLUSH_OUTPUT, true);
>> inst->codec_state = VENUS_DEC_STATE_CAPTURE_SETUP;
>> venus_helper_free_dpb_bufs(inst);
>> break;
>> @@ -1204,9 +1200,28 @@ static void vdec_buf_cleanup(struct vb2_buffer *vb)
>> static void vdec_vb2_buf_queue(struct vb2_buffer *vb)
>> {
>> struct venus_inst *inst = vb2_get_drv_priv(vb->vb2_queue);
>> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> + static const struct v4l2_event eos = { .type = V4L2_EVENT_EOS };
>>
>> vdec_pm_get_put(inst);
>>
>> + mutex_lock(&inst->lock);
>> +
>> + if (inst->next_buf_last && V4L2_TYPE_IS_CAPTURE(vb->vb2_queue->type)
>> &&
>> + inst->codec_state == VENUS_DEC_STATE_DRC) {
>> + vbuf->flags |= V4L2_BUF_FLAG_LAST;
>> + vbuf->sequence = inst->sequence_cap++;
>> + vbuf->field = V4L2_FIELD_NONE;
>> + vb2_set_plane_payload(vb, 0, 0);
>> + v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_DONE);
>> + v4l2_event_queue_fh(&inst->fh, &eos);
>
> I don't think publishing an EOS event here is correct. As the spec says:
I've taken this from vicodec driver, and I guess there is
misinterpretation of the spec. IMO LAST buffer flag and EOS event
somehow overlaps. I've no problem to drop it in next version.
>
> "
> ... Last of the buffers will have the V4L2_BUF_FLAG_LAST flag set. To
> determine the sequence to follow, the client must check if there is
> any pending event and:
>
> * if a V4L2_EVENT_SOURCE_CHANGE event with changes set to
> V4L2_EVENT_SRC_CH_RESOLUTION is pending, the Dynamic Resolution Change
> sequence needs to be followed,
> * if a V4L2_EVENT_EOS event is pending, the End of Stream sequence
> needs to be followed.
> "
>
> With this we will have *both* resolution change and EOS events pending
> when the client checks the event queue after receiving the LAST
> buffer.
>
>
>> + inst->next_buf_last = false;
>> + mutex_unlock(&inst->lock);
>> + return;
>> + }
>> +
>> + mutex_unlock(&inst->lock);
>> +
>> venus_helper_vb2_buf_queue(vb);
>> }
>>
>> @@ -1250,13 +1265,6 @@ static void vdec_buf_done(struct venus_inst *inst,
>> unsigned int buf_type,
>> vb->timestamp = timestamp_us * NSEC_PER_USEC;
>> vbuf->sequence = inst->sequence_cap++;
>>
>> - if (inst->last_buf == vb) {
>> - inst->last_buf = NULL;
>> - vbuf->flags |= V4L2_BUF_FLAG_LAST;
>> - vb2_set_plane_payload(vb, 0, 0);
>> - vb->timestamp = 0;
>> - }
>> -
>> if (vbuf->flags & V4L2_BUF_FLAG_LAST) {
>> const struct v4l2_event ev = { .type =
>> V4L2_EVENT_EOS };
>>
>> @@ -1344,13 +1352,14 @@ static void vdec_event_change(struct venus_inst
>> *inst,
>> struct vb2_v4l2_buffer *last;
>> int ret;
>>
>> - last = v4l2_m2m_last_dst_buf(inst->m2m_ctx);
>> - if (last)
>> - inst->last_buf = &last->vb2_buf;
>> + inst->next_buf_last = true;
>>
>> - ret = hfi_session_flush(inst, HFI_FLUSH_OUTPUT, false);
>> - if (ret)
>> - dev_dbg(dev, VDBGH "flush output error %d\n", ret);
>> + last = v4l2_m2m_last_dst_buf(inst->m2m_ctx);
>> + if (last) {
>> + ret = hfi_session_flush(inst, HFI_FLUSH_OUTPUT,
>> false);
>> + if (ret)
>> + dev_dbg(dev, VDBGH "flush output error
>> %d\n", ret);
>> + }
>> }
>>
>> inst->reconfig = true;
>> @@ -1395,8 +1404,7 @@ static void vdec_event_notify(struct venus_inst *inst,
>> u32 event,
>>
>> static void vdec_flush_done(struct venus_inst *inst)
>> {
>> - if (inst->codec_state == VENUS_DEC_STATE_DRC)
>> - inst->codec_state = VENUS_DEC_STATE_DRC_FLUSH_DONE;
>> + dev_dbg(inst->core->dev_dec, VDBGH "flush done\n");
>> }
>>
>> static const struct hfi_inst_ops vdec_hfi_ops = {
>> --
>> 2.17.1
>>
--
regards,
Stan
