On 2020/10/1 14:41, Krzysztof Kozlowski wrote: > On Wed, Sep 30, 2020 at 11:17:09AM +0800, Zhen Lei wrote: >> Convert the Hisilicon Bootwrapper boot method binding to DT schema format >> using json-schema. >> >> The property boot-method contains two groups of physical address range >> information: bootwrapper and relocation. The "uint32-array" type is not >> suitable for it, because the field "address" and "size" may occupy one or >> two cells respectively. Use "minItems: 1" and "maxItems: 2" to allow it >> can be written in "<addr size addr size>" or "<addr size>, <addr size>" >> format. >> >> Signed-off-by: Zhen Lei <thunder.leiz...@huawei.com> >> --- >> .../hisilicon/controller/hip04-bootwrapper.yaml | 34 >> ++++++++++++++++++++++ >> .../controller/hisilicon,hip04-bootwrapper.txt | 9 ------ >> 2 files changed, 34 insertions(+), 9 deletions(-) >> create mode 100644 >> Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml >> delete mode 100644 >> Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-bootwrapper.txt >> >> diff --git >> a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml >> >> b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml >> new file mode 100644 >> index 000000000000000..7378159e61df998 >> --- /dev/null >> +++ >> b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml >> @@ -0,0 +1,34 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: >> http://devicetree.org/schemas/arm/hisilicon/controller/hip04-bootwrapper.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Bootwrapper boot method >> + >> +maintainers: >> + - Wei Xu <xuw...@hisilicon.com> >> + >> +description: Bootwrapper boot method (software protocol on SMP) >> + >> +properties: >> + compatible: >> + items: >> + - const: hisilicon,hip04-bootwrapper >> + >> + boot-method: >> + description: | >> + Address and size of boot method. >> + [0]: bootwrapper physical address >> + [1]: bootwrapper size >> + [2]: relocation physical address >> + [3]: relocation size > > Intead: items with each item description (bootwrapper address, > relocation address). This way also min/max Items should not be needed. I think it's needed. "reg" also specifies maxItems. > > Best regards, > Krzysztof > > >> + minItems: 1 >> + maxItems: 2 >> + > > . >
