On 2020-10-06 00:31, Rajendra Nayak wrote:
On 10/4/2020 3:56 AM, Kuogee Hsieh wrote:
Set link rate by using OPP set rate api so that CX level will be set
accordingly based on the link rate.

Changes in v2:
-- remove dev from dp_ctrl_put() parameters
-- address review comments

This needs to go below '---' and should not be part of the
change log.


Signed-off-by: Kuogee Hsieh <khs...@codeaurora.org>
---
  drivers/gpu/drm/msm/dp/dp_ctrl.c    | 26 +++++++++++++++++
  drivers/gpu/drm/msm/dp/dp_display.c |  2 +-
drivers/gpu/drm/msm/dp/dp_power.c | 44 ++++++++++++++++++++++++++---
  drivers/gpu/drm/msm/dp/dp_power.h   |  2 +-
  4 files changed, 68 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 2e3e1917351f..6eb9cdad1421 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -10,6 +10,7 @@
  #include <linux/delay.h>
  #include <linux/phy/phy.h>
  #include <linux/phy/phy-dp.h>
+#include <linux/pm_opp.h>
  #include <drm/drm_fixed.h>
  #include <drm/drm_dp_helper.h>
  #include <drm/drm_print.h>
@@ -76,6 +77,8 @@ struct dp_ctrl_private {
        struct dp_parser *parser;
        struct dp_catalog *catalog;
  +     struct opp_table *opp_table;
+
        struct completion idle_comp;
        struct completion video_comp;
  };
@@ -1836,6 +1839,7 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
                        struct dp_parser *parser)
  {
        struct dp_ctrl_private *ctrl;
+       int ret;
        if (!dev || !panel || !aux ||
            !link || !catalog) {
@@ -1849,6 +1853,19 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
                return ERR_PTR(-ENOMEM);
        }
  +     ctrl->opp_table = dev_pm_opp_set_clkname(dev, "ctrl_link");
+       if (IS_ERR(ctrl->opp_table)) {
+               dev_err(dev, "invalid DP OPP table in device tree\n");

You do this regardless of an OPP table in DT, so for starters the error
message is wrong. Secondly this can return you a -EPROBE_DEFER if the
clock driver isn't ready yet.
So the ideal thing to do here, is return a PTR_ERR(ctrl->opp_table)

+               ctrl->opp_table = NULL;
+       } else {
+               /* OPP table is optional */
+               ret = dev_pm_opp_of_add_table(dev);
+               if (ret && ret != -ENODEV) {
+                       dev_pm_opp_put_clkname(ctrl->opp_table);
+                       ctrl->opp_table = NULL;
+               }
+       }
+
        init_completion(&ctrl->idle_comp);
        init_completion(&ctrl->video_comp);
@@ -1866,4 +1883,13 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
    void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
  {
+       struct dp_ctrl_private *ctrl;
+
+       ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+       if (ctrl->opp_table) {
+               dev_pm_opp_of_remove_table(ctrl->dev);
+               dev_pm_opp_put_clkname(ctrl->opp_table);
+               ctrl->opp_table = NULL;
+       }
  }
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index e175aa3fd3a9..269f83550b46 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -698,7 +698,7 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
                goto error;
        }
  -     dp->power = dp_power_get(dp->parser);
+       dp->power = dp_power_get(dev, dp->parser);
        if (IS_ERR(dp->power)) {
                rc = PTR_ERR(dp->power);
                DRM_ERROR("failed to initialize power, rc = %d\n", rc);
diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
index 17c1fc6a2d44..9c4ea00a5f2a 100644
--- a/drivers/gpu/drm/msm/dp/dp_power.c
+++ b/drivers/gpu/drm/msm/dp/dp_power.c
@@ -8,12 +8,14 @@
  #include <linux/clk.h>
  #include <linux/clk-provider.h>
  #include <linux/regulator/consumer.h>
+#include <linux/pm_opp.h>
  #include "dp_power.h"
  #include "msm_drv.h"
    struct dp_power_private {
        struct dp_parser *parser;
        struct platform_device *pdev;
+       struct device *dev;
        struct clk *link_clk_src;
        struct clk *pixel_provider;
        struct clk *link_provider;
@@ -148,18 +150,51 @@ static int dp_power_clk_deinit(struct dp_power_private *power)
        return 0;
  }
+static int dp_power_clk_set_link_rate(struct dp_power_private *power,
+                       struct dss_clk *clk_arry, int num_clk, int enable)
+{
+       u32 rate;
+       int i, rc = 0;
+
+       for (i = 0; i < num_clk; i++) {
+               if (clk_arry[i].clk) {
+                       if (clk_arry[i].type == DSS_CLK_PCLK) {
+                               if (enable)
+                                       rate = clk_arry[i].rate;
+                               else
+                                       rate = 0;
+
+                               rc = dev_pm_opp_set_rate(power->dev, rate);

I am not sure how this is expected to work when you have multiple link clocks, since you can only associate one of them with the OPP table which ends up
getting scaled when you do a dev_pm_opp_set_rate()
Do you really have platforms which will have multiple link clocks?
this clk_arry[] contains two entries, dp_link_clk and dp_link_intf_clk.
only dp_link_clk with DSS_CLK_PCLK type, hence only dp_link_clk use dev_pm_opp_set_rate()
to set link rate.


+                               if (rc)
+                                       break;
+                       }
+
+               }
+       }
+       return rc;
+}
+
  static int dp_power_clk_set_rate(struct dp_power_private *power,
                enum dp_pm_type module, bool enable)
  {
        int rc = 0;
        struct dss_module_power *mp = &power->parser->mp[module];
  -     if (enable) {
-               rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
+       if (module == DP_CTRL_PM) {
+ rc = dp_power_clk_set_link_rate(power, mp->clk_config, mp->num_clk, enable);
                if (rc) {
-                       DRM_ERROR("failed to set clks rate.\n");
+                       DRM_ERROR("failed to set link clks rate\n");
                        return rc;
                }
+       } else {
+

extra blank line

+               if (enable) {
+                       rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
+                       if (rc) {
+                               DRM_ERROR("failed to set clks rate\n");
+                               return rc;
+                       }
+               }
        }
        rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
@@ -349,7 +384,7 @@ int dp_power_deinit(struct dp_power *dp_power)
        return 0;
  }
  -struct dp_power *dp_power_get(struct dp_parser *parser)
+struct dp_power *dp_power_get(struct device *dev, struct dp_parser *parser)
  {
        struct dp_power_private *power;
        struct dp_power *dp_power;
@@ -365,6 +400,7 @@ struct dp_power *dp_power_get(struct dp_parser *parser)
        power->parser = parser;
        power->pdev = parser->pdev;
+       power->dev = dev;
        dp_power = &power->dp_power;
diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h
index 76743d755833..7d0327bbc0d5 100644
--- a/drivers/gpu/drm/msm/dp/dp_power.h
+++ b/drivers/gpu/drm/msm/dp/dp_power.h
@@ -102,6 +102,6 @@ void dp_power_client_deinit(struct dp_power *power);
   * methods to be called by the client to configure the power related
   * modueles.
   */
-struct dp_power *dp_power_get(struct dp_parser *parser);
+struct dp_power *dp_power_get(struct device *dev, struct dp_parser *parser);
    #endif /* _DP_POWER_H_ */

base-commit: d1ea914925856d397b0b3241428f20b945e31434

??

Reply via email to