stingray-usb.dtsi is finally included by three dts files:
bcm958802a802x.dts, bcm958742k.dts and bcm958742t.dts. I searched all
these three entire expanded dts files, and each of them contains only one
dma-ranges. No conversion range is specified, so it cannot work properly.
I think this property "dma-ranges" is added by mistake, just remove it.
Otherwise, the following error will be reported when any YAML detection
is performed on arm64.
arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \
(dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \
its #address-cells (1) differs from / (2)
arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \
(dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \
its #size-cells (1) differs from / (2)
Signed-off-by: Zhen Lei <thunder.leiz...@huawei.com>
---
arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
index 55259f973b5a9e4..9ac8be6c65aa031 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
@@ -4,7 +4,6 @@
*/
usb {
compatible = "simple-bus";
- dma-ranges;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x68500000 0x00400000>;
--
1.8.3
