On Tue, Oct 13, 2020 at 07:14:41AM -0500, Rob Herring wrote:
> On Sun, Oct 11, 2020 at 01:41:04AM +0300, Serge Semin wrote:
> > The generic USB HCD properties have been described in the legacy bindings
> > text file: Documentation/devicetree/bindings/usb/generic.txt . Let's
> > convert it' content into the USB HCD DT schema properties so all USB DT
> > nodes would be validated to have them properly utilized.
> > 
> > Signed-off-by: Serge Semin <sergey.se...@baikalelectronics.ru>
> > ---
> >  .../devicetree/bindings/usb/generic.txt       | 57 -------------
> >  .../devicetree/bindings/usb/usb-hcd.yaml      | 84 +++++++++++++++++++
> >  2 files changed, 84 insertions(+), 57 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/usb/generic.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/generic.txt 
> > b/Documentation/devicetree/bindings/usb/generic.txt
> > deleted file mode 100644
> > index ba472e7aefc9..000000000000
> > --- a/Documentation/devicetree/bindings/usb/generic.txt
> > +++ /dev/null
> > @@ -1,57 +0,0 @@
> > -Generic USB Properties
> > -
> > -Optional properties:
> > - - maximum-speed: tells USB controllers we want to work up to a certain
> > -                   speed. Valid arguments are "super-speed-plus",
> > -                   "super-speed", "high-speed", "full-speed" and
> > -                   "low-speed". In case this isn't passed via DT, USB
> > -                   controllers should default to their maximum HW
> > -                   capability.
> > - - dr_mode: tells Dual-Role USB controllers that we want to work on a
> > -                   particular mode. Valid arguments are "host",
> > -                   "peripheral" and "otg". In case this attribute isn't
> > -                   passed via DT, USB DRD controllers should default to
> > -                   OTG.
> > - - phy_type: tells USB controllers that we want to configure the core to 
> > support
> > -                   a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is
> > -                   selected. Valid arguments are "utmi" and "utmi_wide".
> > -                   In case this isn't passed via DT, USB controllers should
> > -                   default to HW capability.
> > - - otg-rev: tells usb driver the release number of the OTG and EH 
> > supplement
> > -                   with which the device and its descriptors are compliant,
> > -                   in binary-coded decimal (i.e. 2.0 is 0200H). This
> > -                   property is used if any real OTG features(HNP/SRP/ADP)
> > -                   is enabled, if ADP is required, otg-rev should be
> > -                   0x0200 or above.
> > - - companion: phandle of a companion
> > - - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally 
> > HNP
> > -                   is the basic function of real OTG except you want it
> > -                   to be a srp-capable only B device.
> > - - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is
> > -                   optional for OTG device.
> > - - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is
> > -                   optional for OTG device.
> > - - usb-role-switch: boolean, indicates that the device is capable of 
> > assigning
> > -                   the USB data role (USB host or USB device) for a given
> > -                   USB connector, such as Type-C, Type-B(micro).
> > -                   see connector/usb-connector.yaml.
> > - - role-switch-default-mode: indicating if usb-role-switch is enabled, the
> > -                   device default operation mode of controller while usb
> > -                   role is USB_ROLE_NONE. Valid arguments are "host" and
> > -                   "peripheral". Defaults to "peripheral" if not
> > -                   specified.
> > -
> > -
> > -This is an attribute to a USB controller such as:
> > -
> > -dwc3@4a030000 {
> > -   compatible = "synopsys,dwc3";
> > -   reg = <0x4a030000 0xcfff>;
> > -   interrupts = <0 92 4>
> > -   usb-phy = <&usb2_phy>, <&usb3,phy>;
> > -   maximum-speed = "super-speed";
> > -   dr_mode = "otg";
> > -   phy_type = "utmi_wide";
> > -   otg-rev = <0x0200>;
> > -   adp-disable;
> > -};
> > diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml 
> > b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > index 7263b7f2b510..815de24127db 100644
> > --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > @@ -22,9 +22,93 @@ properties:
> >      description:
> >        Name specifier for the USB PHY
> >  
> > +  maximum-speed:
> > +   description: |
> 

> Drop the '|' if there's no formatting to preserve.

Thanks for noticing this. I should have refreshed my YAML multi-line
knowledge https://yaml-multiline.info/ .) I'll fix it in all the patches of
the series.

> 
> > +     Tells USB controllers we want to work up to a certain speed. In case 
> > this
> > +     isn't passed via DT, USB controllers should default to their maximum 
> > HW
> > +     capability.
> > +   $ref: /schemas/types.yaml#/definitions/string
> > +   enum: ["low-speed", "full-speed", "high-speed", "super-speed",
> > +          "super-speed-plus"]
> 

> One per line and drop the quotes.

Ok.

-Sergey

> 
> > +
> > +  dr_mode:
> > +    description: |
> > +      Tells Dual-Role USB controllers that we want to work on a particular
> > +      mode. In case this attribute isn't passed via DT, USB DRD controllers
> > +      should default to OTG.
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    enum: ["host", "peripheral", "otg"]
> > +
> > +  phy_type:
> > +    description: |
> > +      Tells USB controllers that we want to configure the core to support a
> > +      UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected. In 
> > case
> > +      this isn't passed via DT, USB controllers should default to HW
> > +      capability.
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    enum: ["utmi", "utmi_wide"]
> > +
> > +  otg-rev:
> > +    description: |
> > +      Tells usb driver the release number of the OTG and EH supplement with
> > +      which the device and its descriptors are compliant, in binary-coded
> > +      decimal (i.e. 2.0 is 0200H). This property is used if any real OTG
> > +      features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev 
> > should be
> > +      0x0200 or above.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +  companion:
> > +    description: Phandle of a companion device
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +
> > +  hnp-disable:
> > +    description: |
> > +      Tells OTG controllers we want to disable OTG HNP. Normally HNP is the
> > +      basic function of real OTG except you want it to be a srp-capable 
> > only B
> > +      device.
> > +    type: boolean
> > +
> > +  srp-disable:
> > +    description: |
> > +      Tells OTG controllers we want to disable OTG SRP. SRP is optional 
> > for OTG
> > +      device.
> > +    type: boolean
> > +
> > +  adp-disable:
> > +    description: |
> > +      Tells OTG controllers we want to disable OTG ADP. ADP is optional 
> > for OTG
> > +      device.
> > +    type: boolean
> > +
> > +  usb-role-switch:
> > +    description: |
> > +      Indicates that the device is capable of assigning the USB data role
> > +      (USB host or USB device) for a given USB connector, such as Type-C,
> > +      Type-B(micro). See connector/usb-connector.yaml.
> > +
> > +  role-switch-default-mode:
> > +    description: |
> > +      Indicates if usb-role-switch is enabled, the device default operation
> > +      mode of controller while usb role is USB_ROLE_NONE.
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    enum: ["host", "peripheral"]
> > +    default: "peripheral"
> > +
> >  examples:
> >    - |
> >      usb {
> >          phys = <&usb2_phy1>, <&usb3_phy1>;
> >          phy-names = "usb";
> >      };
> > +  - |
> > +    usb@4a030000 {
> > +        compatible = "snps,dwc3";
> > +        reg = <0x4a030000 0xcfff>;
> > +        interrupts = <0 92 4>;
> > +        usb-phy = <&usb2_phy>, <&usb3_phy>;
> > +        maximum-speed = "super-speed";
> > +        dr_mode = "otg";
> > +        phy_type = "utmi_wide";
> > +        otg-rev = <0x0200>;
> > +        adp-disable;
> > +    };
> > -- 
> > 2.27.0
> > 

Reply via email to