Hit a warning:
WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627
__queue_delayed_work+0x6d/0x90
with trace:
mod_delayed_work_on+0x59/0x90
nvmet_update_cc+0xee/0x100 [nvmet]
nvmet_execute_prop_set+0x72/0x80 [nvmet]
nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp]
nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp]
...
This could be reproduced easily with a keep alive time 0:
nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0
The reason is:
Starting an uninitialized work when initiator connects with zero
kato. Althrough keep-alive timer is disabled during allocating a ctrl
(fix in 0d3b6a8d213a), ka_work still has a chance to run
(called by nvmet_start_ctrl to detect dead host).
This should have a "Fixes:" tag.
Initilize ka_work during allocating ctrl, and set a reasonable kato
before scheduling ka_work.
Signed-off-by: zhenwei pi <pizhen...@bytedance.com>
---
drivers/nvme/target/core.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index b7b63330b5ef..3c5b2b065476 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -19,6 +19,8 @@ struct workqueue_struct *buffered_io_wq;
static const struct nvmet_fabrics_ops *nvmet_transports[NVMF_TRTYPE_MAX];
static DEFINE_IDA(cntlid_ida);
+#define NVMET_DEFAULT_KATO 5
+
/*
* This read/write semaphore is used to synchronize access to configuration
* information on a target system that will result in discovery log page
@@ -385,6 +387,11 @@ static void nvmet_keep_alive_timer(struct work_struct
*work)
if (cmd_seen) {
pr_debug("ctrl %d reschedule traffic based keep-alive timer\n",
ctrl->cntlid);
+
+ /* run once, trigger from nvmet_start_ctrl to detect dead link
*/
+ if (!ctrl->kato)
+ return;
+
schedule_delayed_work(&ctrl->ka_work, ctrl->kato * HZ);
It will be better to just schedule/mod the ka_work if kato != 0, other
changes in the patch aren't needed IMO.
return;
}
@@ -403,15 +410,11 @@ static void nvmet_start_keep_alive_timer(struct
nvmet_ctrl *ctrl)
pr_debug("ctrl %d start keep-alive timer for %d secs\n",
ctrl->cntlid, ctrl->kato);
- INIT_DELAYED_WORK(&ctrl->ka_work, nvmet_keep_alive_timer);
schedule_delayed_work(&ctrl->ka_work, ctrl->kato * HZ);
}
static void nvmet_stop_keep_alive_timer(struct nvmet_ctrl *ctrl)
{
- if (unlikely(ctrl->kato == 0))
- return;
-
pr_debug("ctrl %d stop keep-alive\n", ctrl->cntlid);
cancel_delayed_work_sync(&ctrl->ka_work);
@@ -1107,6 +1110,8 @@ static inline u8 nvmet_cc_iocqes(u32 cc)
static void nvmet_start_ctrl(struct nvmet_ctrl *ctrl)
{
+ u32 kato = ctrl->kato ? ctrl->kato : NVMET_DEFAULT_KATO;
+
The controller shouldn't have a default value, it should receive
the desired value from the host.
lockdep_assert_held(&ctrl->lock);
if (nvmet_cc_iosqes(ctrl->cc) != NVME_NVM_IOSQES ||
@@ -1126,7 +1131,7 @@ static void nvmet_start_ctrl(struct nvmet_ctrl *ctrl)
* in case a host died before it enabled the controller. Hence, simply
* reset the keep alive timer when the controller is enabled.
*/
- mod_delayed_work(system_wq, &ctrl->ka_work, ctrl->kato * HZ);
+ mod_delayed_work(system_wq, &ctrl->ka_work, kato * HZ);
}
static void nvmet_clear_ctrl(struct nvmet_ctrl *ctrl)
@@ -1378,6 +1383,7 @@ u16 nvmet_alloc_ctrl(const char *subsysnqn, const char
*hostnqn,
/* keep-alive timeout in seconds */
ctrl->kato = DIV_ROUND_UP(kato, 1000);
+ INIT_DELAYED_WORK(&ctrl->ka_work, nvmet_keep_alive_timer);
ctrl->err_counter = 0;
spin_lock_init(&ctrl->error_lock);
