> From: Shawn Guo <shawn...@kernel.org> > Sent: Wednesday, August 19, 2020 9:32 PM > > > > The SNVS is a hardware component in the imx8 SoC. One of its function > > is to detect hardware attacks, in which case it creates a SECurity > > VIOlation. > > > > This patch adds the support for the reception of these secvio and > > report it to the audit framework. > > > > It also gives the possibility to perform custom processing when a > > secvio is detected. > > > > Signed-off-by: Franck LENORMAND <franck.lenorm...@oss.nxp.com> > > Reported-by: kernel test robot <l...@intel.com> > > --- > > drivers/soc/imx/Kconfig | 10 + > > drivers/soc/imx/Makefile | 1 + > > drivers/soc/imx/secvio/Kconfig | 10 + > > drivers/soc/imx/secvio/Makefile | 3 + > > drivers/soc/imx/secvio/imx-secvio-audit.c | 39 ++ > > drivers/soc/imx/secvio/imx-secvio-debugfs.c | 379 ++++++++++++ > > drivers/soc/imx/secvio/imx-secvio-sc-int.h | 84 +++ > > drivers/soc/imx/secvio/imx-secvio-sc.c | 858 > ++++++++++++++++++++++++++++ > > include/soc/imx/imx-secvio-sc.h | 177 ++++++ > > 9 files changed, 1561 insertions(+) > > create mode 100644 drivers/soc/imx/secvio/Kconfig create mode 100644 > > drivers/soc/imx/secvio/Makefile create mode 100644 > > drivers/soc/imx/secvio/imx-secvio-audit.c > > create mode 100644 drivers/soc/imx/secvio/imx-secvio-debugfs.c > > create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc-int.h > > create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc.c > > create mode 100644 include/soc/imx/imx-secvio-sc.h > > Hi Arnd, > > Do we have any subsystem to accommodate this driver? Or 'soc' is just the > right place for it? >
Not sure if EDAC could be a better place. e.g. drivers/edac/sifive_edac.c If not, maybe we can put in 'soc' first. Regards Aisheng > Shawn > > > > > diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig index > > a9370f4..6c1bc78 100644 > > --- a/drivers/soc/imx/Kconfig > > +++ b/drivers/soc/imx/Kconfig > > @@ -19,4 +19,14 @@ config SOC_IMX8M > > support, it will provide the SoC info like SoC family, > > ID and revision etc. > > > > +config SECVIO_SC > > + tristate "NXP SC secvio support" > > + depends on IMX_SCU > > + help > > + If you say yes here you get support for the NXP SNVS security > > + violation module. It includes the possibility to read > > information > > + related to security violations and tampers. It also gives the > > + possibility to register user callbacks when a security violation > > + occurs. > > + > > endmenu > > diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index > > 078dc91..c91a499 100644 > > --- a/drivers/soc/imx/Makefile > > +++ b/drivers/soc/imx/Makefile > > @@ -5,3 +5,4 @@ endif > > obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o > > obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o > > obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o > > +obj-${CONFIG_SECVIO_SC} += secvio/ > > diff --git a/drivers/soc/imx/secvio/Kconfig > > b/drivers/soc/imx/secvio/Kconfig new file mode 100644 index > > 0000000..dcfaea5 > > --- /dev/null > > +++ b/drivers/soc/imx/secvio/Kconfig > > @@ -0,0 +1,10 @@ > > +config SECVIO_SC > > + tristate "NXP SC secvio support" > > + depends on IMX_SCU > > + help > > + If you say yes here you get support for the NXP SNVS security > > + violation module. It includes the possibility to read > > information > > + related to security violations and tampers. It also gives the > > + possibility to register user callbacks when a security violation > > + occurs. > > + > > diff --git a/drivers/soc/imx/secvio/Makefile > > b/drivers/soc/imx/secvio/Makefile new file mode 100644 index > > 0000000..d5a89ba > > --- /dev/null > > +++ b/drivers/soc/imx/secvio/Makefile > > @@ -0,0 +1,3 @@ > > +obj-y += imx-secvio-sc.o > > +obj-$(CONFIG_DEBUG_FS) += imx-secvio-debugfs.o > > +obj-$(CONFIG_AUDIT) += imx-secvio-audit.o > > diff --git a/drivers/soc/imx/secvio/imx-secvio-audit.c > > b/drivers/soc/imx/secvio/imx-secvio-audit.c > > new file mode 100644 > > index 0000000..dc96e16 > > --- /dev/null > > +++ b/drivers/soc/imx/secvio/imx-secvio-audit.c > > @@ -0,0 +1,39 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright 2019-2020 NXP > > + */ > > + > > +#include <linux/audit.h> > > + > > +#include <soc/imx/imx-secvio-sc.h> > > + > > +/** > > + * report_to_audit_notify() - Report secvio and tamper status to > > +audit FW > > + * > > + * This function can be chained in a notifier list > > + * > > + * @nb: notifier block > > + * @status: error code > > + * @notif_info: Pointer on secvio_sc_notifier_info structure > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +int report_to_audit_notify(struct notifier_block *nb, unsigned long status, > > + void *notif_info) > > +{ > > + struct audit_buffer *ab; > > + struct secvio_sc_notifier_info *info = notif_info; > > + > > + ab = audit_log_start(audit_context(), GFP_KERNEL, > AUDIT_INTEGRITY_RULE); > > + if (!ab) > > + return -ENOMEM; > > + > > + audit_log_format(ab, " hpsvs=0x%.08x lps=0x%.08x lptds=0x%.08x", > > + info->hpsvs, info->lps, info->lptds); > > + audit_log_task_info(ab); > > + audit_log_end(ab); > > + > > + return 0; > > +} > > diff --git a/drivers/soc/imx/secvio/imx-secvio-debugfs.c > > b/drivers/soc/imx/secvio/imx-secvio-debugfs.c > > new file mode 100644 > > index 0000000..bcbd77a > > --- /dev/null > > +++ b/drivers/soc/imx/secvio/imx-secvio-debugfs.c > > @@ -0,0 +1,379 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright 2019-2020 NXP > > + */ > > + > > +/* > > + * The module exposes 3 files in debugfs: > > + * - secvio/info: > > + * * Read: It returns the value of the fuses and SNVS registers which > > are > > + * readable and related to secvio and tampers > > + * * Write: A write of the format "<hex id> [<hex value 0> <hex value > > 1> > > + * <hex value 2> <hex value 3> <hex value 4>](<nb values>)" > > + * will write the SNVS register having the provided id with > the > > + * values provided (cf SECO documentation) > > + * - secvio/enable: State of the IRQ > > + * - secvio/check: Check the state of the security violation and tampers > > + * and calls notifier > > + * - secvio/clear: Clear the state of all secvio and tampers */ > > + > > +#include <linux/kernel.h> > > +#include <linux/device.h> > > +#include <linux/debugfs.h> > > +#include <linux/uaccess.h> > > +#include <linux/nvmem-consumer.h> > > + > > +#include <linux/firmware/imx/svc/misc.h> #include > > +<linux/firmware/imx/svc/seco.h> > > + > > +#include <soc/imx/imx-secvio-sc.h> > > +#include "imx-secvio-sc-int.h" > > + > > +/** > > + * fuse_reader() - Read a set of fuse > > + * > > + * @dev: secvio device > > + * @id: offset of the fuse > > + * @value: array of values read > > + * @mul: number of fuse to read > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int fuse_reader(struct device *dev, u32 id, u32 *value, u8 > > +mul) { > > + struct imx_secvio_sc_data *data = dev_get_drvdata(dev); > > + u32 size_to_read = mul * sizeof(u32); > > + int ret; > > + > > + ret = nvmem_device_read(data->nvmem, id, size_to_read, value); > > + if (ret < 0) { > > + dev_err(data->dev, "Failed to read fuse %d: %d\n", id, ret); > > + return ret; > > + } > > + > > + if (ret != size_to_read) { > > + dev_err(data->dev, "Read only %d instead of %d\n", ret, > > + size_to_read); > > + return -ENOMEM; > > + } > > + > > + return 0; > > +} > > + > > +/** > > + * snvs_reader() - Read a set of SNVS register > > + * > > + * @dev: secvio device > > + * @id: offset of the register > > + * @value: array of values read > > + * @mul: number of registers to read > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int snvs_reader(struct device *dev, u32 id, u32 *value, u8 > > +mul) { > > + int ret; > > + u32 *v1, *v2, *v3, *v4, *v5; > > + > > + v1 = NULL; > > + v2 = NULL; > > + v3 = NULL; > > + v4 = NULL; > > + v5 = NULL; > > + > > + switch (mul) { > > + case 5: > > + v5 = &value[4]; > > + fallthrough; > > + case 4: > > + v4 = &value[3]; > > + fallthrough; > > + case 3: > > + v3 = &value[2]; > > + fallthrough; > > + case 2: > > + v2 = &value[1]; > > + fallthrough; > > + case 1: > > + v1 = &value[0]; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + ret = call_secvio_config(dev, id, SECVIO_CONFIG_READ, v1, v2, v3, v4, > > + v5, mul); > > + if (ret < 0) > > + dev_err(dev, "Failed to read snvs reg %d: %d\n", id, ret); > > + > > + return ret; > > +} > > + > > +/** > > + * snvs_dgo_reader() - Read a set of DGO register > > + * > > + * @dev: secvio device > > + * @id: offset of the register > > + * @value: array of values read > > + * @mul: number of registers to read > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int snvs_dgo_reader(struct device *dev, u32 id, u32 *value, u8 > > +mul) { > > + struct imx_secvio_sc_data *data = dev_get_drvdata(dev); > > + int ret; > > + > > + /* We check that we only have 1 register to read */ > > + if (mul != 1) > > + return -EINVAL; > > + > > + ret = imx_sc_seco_secvio_dgo_config(data->ipc_handle, id, > > + SECVIO_CONFIG_READ, value); > > + if (ret) > > + dev_err(dev, "Failed to read snvs dgo reg %d: %d\n", id, ret); > > + > > + return ret; > > +} > > + > > +static const struct imx_secvio_info_entry { > > + int (*reader)(struct device *dev, u32 id, u32 *value, u8 mul); > > + const char *type; > > + const char *name; > > + u32 id; > > + u8 mul; > > +} gs_imx_secvio_info_list[] = { > > + {fuse_reader, "fuse", "trim", 30, 1}, > > + {fuse_reader, "fuse", "trim2", 31, 1}, > > + {fuse_reader, "fuse", "ctrim1", 260, 1}, > > + {fuse_reader, "fuse", "ctrim2", 261, 1}, > > + {fuse_reader, "fuse", "ctrim3", 262, 1}, > > + {fuse_reader, "fuse", "ctrim4", 263, 1}, > > + {fuse_reader, "fuse", "OSC_CAP", 768, 1}, > > + > > + {snvs_reader, "snvs", "HPLR", 0x0, 1}, > > + {snvs_reader, "snvs", "LPLR", 0x34, 1}, > > + {snvs_reader, "snvs", "HPSICR", 0xc, 1}, > > + {snvs_reader, "snvs", "HPSVCR", 0x10, 1}, > > + {snvs_reader, "snvs", "HPSVS", 0x18, 1}, > > + {snvs_reader, "snvs", "LPSVC", 0x40, 1}, > > + {snvs_reader, "snvs", "LPTDC", 0x48, 2}, > > + {snvs_reader, "snvs", "LPSR", 0x4c, 1}, > > + {snvs_reader, "snvs", "LPTDS", 0xa4, 1}, > > + {snvs_reader, "snvs", "LPTGFC", 0x44, 3}, > > + {snvs_reader, "snvs", "LPATCTL", 0xe0, 1}, > > + {snvs_reader, "snvs", "LPATCLK", 0xe4, 1}, > > + {snvs_reader, "snvs", "LPATRC1", 0xe8, 2}, > > + {snvs_reader, "snvs", "LPMKC", 0x3c, 1}, > > + {snvs_reader, "snvs", "LPSMC", 0x5c, 2}, > > + {snvs_reader, "snvs", "LPPGD", 0x64, 1}, > > + {snvs_reader, "snvs", "HPVID", 0xf8, 2}, > > + > > + {snvs_dgo_reader, "dgo", "Offset", 0x0, 1}, > > + {snvs_dgo_reader, "dgo", "PUP/PD", 0x10, 1}, > > + {snvs_dgo_reader, "dgo", "Anatest", 0x20, 1}, > > + {snvs_dgo_reader, "dgo", "T trim", 0x30, 1}, > > + {snvs_dgo_reader, "dgo", "Misc", 0x40, 1}, > > + {snvs_dgo_reader, "dgo", "Vmon", 0x50, 1}, > > +}; > > + > > +struct imx_secvio_sc_info_seq_data { > > + struct device *dev; > > + const struct imx_secvio_info_entry *list; > > + int size; > > +}; > > + > > +/** > > + * imx_secvio_sc_info_seq_start() - Start sequence > > + * > > + * @m: seq file > > + * @pos: position in the sequence > > + * > > + * Return pointer on position > > + */ > > +static void *imx_secvio_sc_info_seq_start(struct seq_file *m, loff_t > > +*pos) { > > + struct imx_secvio_sc_info_seq_data *data = m->private; > > + > > + /* Check we are not out of bound */ > > + if (*pos >= data->size) > > + return NULL; > > + > > + return (void *)pos; > > +} > > + > > +/** > > + * imx_secvio_sc_info_seq_next() - Iterate sequence > > + * > > + * @m: seq file > > + * @v: pointer > > + * @pos: position in the sequence > > + * > > + * Return pointer on position > > + */ > > +static void *imx_secvio_sc_info_seq_next(struct seq_file *m, void *v, > > +loff_t *pos) { > > + /* Increment the counter */ > > + ++*pos; > > + > > + /* call the start function which will check the index */ > > + return imx_secvio_sc_info_seq_start(m, pos); } > > + > > +/** > > + * imx_secvio_sc_info_seq_stop() - Stop sequence > > + * > > + * @m: seq file > > + * @v: pointer > > + */ > > +static void imx_secvio_sc_info_seq_stop(struct seq_file *m, void *v) > > +{ } > > + > > +/** > > + * imx_secvio_sc_info_seq_show() - Show the item in the sequence > > + * > > + * @m: seq file > > + * @v: pointer > > + * @pos: position in the sequence > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int imx_secvio_sc_info_seq_show(struct seq_file *m, void *v) { > > + struct imx_secvio_sc_info_seq_data *data = m->private; > > + const struct imx_secvio_info_entry *e; > > + int ret; > > + u32 vals[5]; > > + int idx; > > + > > + idx = *(loff_t *)v; > > + e = &data->list[idx]; > > + > > + /* Read the values */ > > + ret = e->reader(data->dev, e->id, (u32 *)&vals, e->mul); > > + if (ret) { > > + dev_err(data->dev, "Fail to read %s %s (idx %d)\n", e->type, > > + e->name, e->id); > > + return 0; > > + } > > + > > + seq_printf(m, "%5s/%-10s(%.3d):", e->type, e->name, e->id); > > + > > + /* Loop over the values */ > > + for (idx = 0; idx < e->mul; idx++) > > + seq_printf(m, " %.8x", vals[idx]); > > + > > + seq_puts(m, "\n"); > > + > > + return 0; > > +} > > + > > +static const struct seq_operations imx_secvio_sc_info_seq_ops = { > > + .start = imx_secvio_sc_info_seq_start, > > + .next = imx_secvio_sc_info_seq_next, > > + .stop = imx_secvio_sc_info_seq_stop, > > + .show = imx_secvio_sc_info_seq_show, }; > > + > > +/** > > + * imx_secvio_sc_info_open() - Store node info for ioctl > > + * > > + * @inode: inode > > + * @file: file used to perform the ioctl > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int imx_secvio_sc_info_open(struct inode *inode, struct file > > +*file) { > > + struct imx_secvio_sc_info_seq_data *data; > > + > > + data = __seq_open_private(file, &imx_secvio_sc_info_seq_ops, > sizeof(*data)); > > + if (!data) > > + return -ENOMEM; > > + > > + data->dev = inode->i_private; > > + data->list = gs_imx_secvio_info_list; > > + data->size = ARRAY_SIZE(gs_imx_secvio_info_list); > > + > > + return 0; > > +} > > + > > +static const struct file_operations imx_secvio_sc_info_ops = { > > + .owner = THIS_MODULE, > > + .open = imx_secvio_sc_info_open, > > + .read = seq_read, > > + .llseek = seq_lseek, > > + .release = seq_release_private, > > +}; > > + > > +/** > > + * if_debugfs_remove_recursive() - Wrapper for > > +debugfs_remove_recursive > > + * > > + * Can be used with devm > > + * > > + * @dentry: directory entry > > + */ > > +static void if_debugfs_remove_recursive(void *dentry) { > > + debugfs_remove_recursive(dentry); > > +} > > + > > +/** > > + * imx_secvio_sc_debugfs() - Create the debugfs > > + * > > + * @dev: secvio device > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +int imx_secvio_sc_debugfs(struct device *dev) { > > + struct imx_secvio_sc_data *data = dev_get_drvdata(dev); > > + struct dentry *dir; > > + int ret = 0; > > + > > + /* Create a folder */ > > + dir = debugfs_create_dir(dev_name(dev), NULL); > > + if (IS_ERR(dir)) { > > + dev_err(dev, "Failed to create dfs dir\n"); > > + ret = PTR_ERR(dir); > > + goto exit; > > + } > > + data->dfs = dir; > > + > > + ret = devm_add_action(dev, if_debugfs_remove_recursive, data->dfs); > > + if (ret) { > > + dev_err(dev, "Failed to add managed action to disable IRQ\n"); > > + goto remove_fs; > > + } > > + > > + /* Create the file to read info and write to reg */ > > + dir = debugfs_create_file("info", 0x666, data->dfs, dev, > > + &imx_secvio_sc_info_ops); > > + if (IS_ERR(dir)) { > > + dev_err(dev, "Failed to add info to debugfs\n"); > > + ret = PTR_ERR(dir); > > + goto exit; > > + } > > + > > + goto exit; > > + > > +remove_fs: > > + debugfs_remove_recursive(data->dfs); > > + > > +exit: > > + return ret; > > +} > > diff --git a/drivers/soc/imx/secvio/imx-secvio-sc-int.h > > b/drivers/soc/imx/secvio/imx-secvio-sc-int.h > > new file mode 100644 > > index 0000000..54de7fa > > --- /dev/null > > +++ b/drivers/soc/imx/secvio/imx-secvio-sc-int.h > > @@ -0,0 +1,84 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > +/* > > + * Copyright 2019-2020 NXP > > + */ > > + > > +#ifndef SECVIO_SC_H > > +#define SECVIO_SC_H > > + > > +/* Includes */ > > +#include <linux/kernel.h> > > +#include <linux/notifier.h> > > +#include <linux/semaphore.h> > > +#include <linux/nvmem-consumer.h> > > +#include <linux/miscdevice.h> > > + > > +/* Access for sc_seco_secvio_config API */ #define SECVIO_CONFIG_READ > > +0 #define SECVIO_CONFIG_WRITE 1 > > + > > +/* Internal Structure */ > > +struct imx_secvio_sc_data { > > + struct device *dev; > > + > > + struct imx_sc_ipc *ipc_handle; > > + > > + struct notifier_block irq_nb; > > + struct notifier_block report_nb; > > + struct notifier_block audit_nb; > > + > > + struct nvmem_device *nvmem; > > + > > + struct miscdevice miscdev; > > + > > +#ifdef CONFIG_DEBUG_FS > > + struct dentry *dfs; > > +#endif > > + > > + u32 version; > > +}; > > + > > +/** > > + * call_secvio_config() - Wrapper for imx_sc_seco_secvio_config() > > + * > > + * @dev: secvio device > > + * @id: ID of the register, ie the offset of the first register of > > +the set > > + * @access: Write (1) or Read (0) the registers > > + * @data0: Data for the first register > > + * @data1: Data for the second register > > + * @data2: Data for the third register > > + * @data3: Data for the fourth register > > + * @data4: Data for the fifth register > > + * @size: Number of register to configure > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +int call_secvio_config(struct device *dev, u8 id, u8 access, u32 *data0, > > + u32 *data1, u32 *data2, u32 *data3, u32 *data4, u8 size); > > + > > +#ifdef CONFIG_DEBUG_FS > > +extern > > +int imx_secvio_sc_debugfs(struct device *dev); #else static inline > > +int imx_secvio_sc_debugfs(struct device *dev) { > > + return 0; > > +} > > +#endif /* CONFIG_DEBUG_FS */ > > + > > +#ifdef CONFIG_AUDIT > > +int report_to_audit_notify(struct notifier_block *nb, unsigned long status, > > + void *notif_info); > > +#else /* CONFIG_AUDIT */ > > +static inline > > +int report_to_audit_notify(struct notifier_block *nb, unsigned long status, > > + void *notif_info) > > +{ > > + return 0; > > +} > > +#endif /* CONFIG_AUDIT */ > > + > > +#endif /* SECVIO_SC_H */ > > diff --git a/drivers/soc/imx/secvio/imx-secvio-sc.c > > b/drivers/soc/imx/secvio/imx-secvio-sc.c > > new file mode 100644 > > index 0000000..1e0d6aa > > --- /dev/null > > +++ b/drivers/soc/imx/secvio/imx-secvio-sc.c > > @@ -0,0 +1,858 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright 2019-2020 NXP > > + */ > > + > > +/* > > + * The SoC of the i.MX8 family contains a hardware block called SNVS > > + * (Secure Non-Volatile Storage). > > + * > > + * The i.MX8 (QM/QXP/DXL) SoC contains the (SNVS) block. This > > + * block can detect specific hardware attacks. Due to the presence of > > +the SECO, > > + * this block can only be accessible using the SCFW API. > > + * > > + * This module interacts with the SCU which relays request to/from > > +the SNVS block > > + * to detect if security violation occurred. > > + * > > + * The module exports an API to add processing when a SV is detected: > > + * - register_imx_secvio_sc_notifier > > + * - unregister_imx_secvio_sc_notifier > > + * - imx_secvio_sc_check_state > > + * - int_imx_secvio_sc_clear_state > > + * - imx_secvio_sc_enable_irq > > + * - imx_secvio_sc_disable_irq > > + */ > > + > > +#include <linux/kernel.h> > > +#include <linux/device.h> > > +#include <linux/notifier.h> > > +#include <linux/module.h> > > +#include <linux/fs.h> > > +#include <linux/uaccess.h> > > +#include <linux/of_device.h> > > +#include <linux/platform_device.h> > > +#include <linux/nvmem-consumer.h> > > +#include <linux/miscdevice.h> > > + > > +#include <linux/firmware/imx/ipc.h> > > +#include <linux/firmware/imx/sci.h> > > +#include <linux/firmware/imx/svc/seco.h> #include > > +<linux/firmware/imx/svc/rm.h> #include > > +<dt-bindings/firmware/imx/rsrc.h> > > + > > +#include <soc/imx/imx-secvio-sc.h> > > +#include "imx-secvio-sc-int.h" > > + > > +/* Definitions */ > > +static int int_imx_secvio_sc_enable_irq(struct device *dev); static > > +int int_imx_secvio_sc_disable_irq(struct device *dev); > > + > > +/* Reference on the driver_device */ > > +static struct device *gs_imx_secvio_sc_dev; > > + > > +/* Register IDs for sc_seco_secvio_config API */ #define HPSVS_ID > > +0x18 #define LPS_ID 0x4c #define LPTDS_ID 0xa4 #define HPVIDR_ID 0xf8 > > + > > +#define SECO_MINOR_VERSION_SUPPORT_SECVIO_TAMPER 0x53 #define > > +SECO_VERSION_MINOR_MASK GENMASK(15, 0) > > + > > +/* Notifier list for new CB */ > > +static BLOCKING_NOTIFIER_HEAD(imx_secvio_sc_notifier_chain); > > + > > +/** > > + * register_imx_secvio_sc_notifier() - Add function to secvio call > > +chain > > + * > > + * @nb: notifier block of the function to add > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +int register_imx_secvio_sc_notifier(struct notifier_block *nb) { > > + return blocking_notifier_chain_register(&imx_secvio_sc_notifier_chain, > > + nb); > > +} > > +EXPORT_SYMBOL(register_imx_secvio_sc_notifier); > > + > > +/** > > + * unregister_imx_secvio_sc_notifier() - Remove function to secvio > > +call chain > > + * > > + * @nb: notifier block of the function to add > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +int unregister_imx_secvio_sc_notifier(struct notifier_block *nb) { > > + return blocking_notifier_chain_unregister(&imx_secvio_sc_notifier_chain, > > + nb); > > +} > > +EXPORT_SYMBOL(unregister_imx_secvio_sc_notifier); > > + > > +/** > > + * if_imx_scu_irq_register_notifier() - Wrapper for > > +imx_scu_irq_register_notifier > > + * > > + * Can be used for devm actions > > + * > > + * @nb: notifier block of the function to add */ static void > > +if_unregister_imx_secvio_sc_notifier(void *nb) { > > + unregister_imx_secvio_sc_notifier(nb); > > +} > > + > > +/** > > + * imx_secvio_sc_notifier_call_chain() - Call secvio notifier chain > > + * > > + * @info: The structure containing the info to pass to notified > > +functions > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static > > +int imx_secvio_sc_notifier_call_chain(struct secvio_sc_notifier_info > > +*info) { > > + return blocking_notifier_call_chain(&imx_secvio_sc_notifier_chain, 0, > > + (void *)info); > > +} > > + > > +int call_secvio_config(struct device *dev, u8 id, u8 access, u32 *data0, > > + u32 *data1, u32 *data2, u32 *data3, u32 *data4, u8 size) > > { > > + int ret = 0; > > + struct imx_secvio_sc_data *data; > > + > > + data = dev_get_drvdata(dev); > > + > > + ret = imx_sc_seco_secvio_config(data->ipc_handle, id, access, data0, > > + data1, data2, data3, data4, size); > > + if (ret) > > + dev_err(dev, "Fail %s secvio config %d", > > + ((access) ? "write" : "read"), ret); > > + > > + return ret; > > +} > > + > > +/** > > + * int_imx_secvio_sc_get_state() - Get the state of secvio and tamper > > + * > > + * @dev: secvio device > > + * @info: The structure to use to store the status > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int int_imx_secvio_sc_get_state(struct device *dev, > > + struct secvio_sc_notifier_info *info) { > > + struct secvio_sc_notifier_info _info = {0}; > > + struct secvio_sc_notifier_info *p_info; > > + int ret = 0, ret2 = 0; > > + > > + p_info = info ? info : &_info; > > + > > + /* Read secvio status */ > > + ret = call_secvio_config(dev, HPSVS_ID, SECVIO_CONFIG_READ, > > + &p_info->hpsvs, NULL, NULL, NULL, NULL, 1); > > + if (ret) { > > + ret2 = ret; > > + dev_warn(dev, "Cannot read secvio status: %d\n", ret); > > + } > > + p_info->hpsvs &= HPSVS__ALL_SV__MASK; > > + > > + /* Read tampers status */ > > + ret = call_secvio_config(dev, LPS_ID, SECVIO_CONFIG_READ, > > + &p_info->lps, NULL, NULL, NULL, NULL, 1); > > + if (ret) { > > + ret2 = ret; > > + dev_warn(dev, "Cannot read tamper 1 status: %d\n", ret); > > + } > > + p_info->lps &= LPS__ALL_TP__MASK; > > + > > + ret = call_secvio_config(dev, LPTDS_ID, SECVIO_CONFIG_READ, > > + &p_info->lptds, NULL, NULL, NULL, NULL, 1); > > + if (ret) { > > + ret2 = ret; > > + dev_warn(dev, "Cannot read tamper 2 status: %d\n", ret); > > + } > > + p_info->lptds &= LPTDS__ALL_TP__MASK; > > + > > + dev_dbg(dev, "Status: %.8x, %.8x, %.8x\n", p_info->hpsvs, > > + p_info->lps, p_info->lptds); > > + > > + return ret2; > > +} > > + > > +/** > > + * imx_secvio_sc_get_state() - Wrapper for > > +int_imx_secvio_sc_get_state > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +inline int imx_secvio_sc_get_state(struct secvio_sc_notifier_info > > +*info) { > > + if (!gs_imx_secvio_sc_dev) > > + return -EOPNOTSUPP; > > + > > + return int_imx_secvio_sc_get_state(gs_imx_secvio_sc_dev, info); } > > +EXPORT_SYMBOL(imx_secvio_sc_get_state); > > + > > +/** > > + * int_imx_secvio_sc_check_state() - Get the state and call chain of > > +notifier > > + * if there is a status > > + * > > + * @dev: secvio device > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int int_imx_secvio_sc_check_state(struct device *dev) { > > + struct secvio_sc_notifier_info info = {0}; > > + int ret = 0; > > + > > + ret = int_imx_secvio_sc_get_state(dev, &info); > > + if (ret) { > > + dev_err(dev, "Failed to get secvio state\n"); > > + goto exit; > > + } > > + > > + /* Call chain of CB registered to this module if status detected */ > > + if (info.hpsvs || info.lps || info.lptds) > > + if (imx_secvio_sc_notifier_call_chain(&info)) > > + dev_warn(dev, > > + "Issues when calling the notifier chain\n"); > > + > > +exit: > > + return ret; > > +} > > + > > +/** > > + * imx_secvio_sc_check_state() - Wrapper for > > +int_imx_secvio_sc_check_state > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +inline int imx_secvio_sc_check_state(void) { > > + if (!gs_imx_secvio_sc_dev) > > + return -EOPNOTSUPP; > > + > > + return int_imx_secvio_sc_check_state(gs_imx_secvio_sc_dev); > > +} > > +EXPORT_SYMBOL(imx_secvio_sc_check_state); > > + > > +/** > > + * imx_secvio_sc_notify() - Process event from SCU > > + * > > + * If the event is secvio we check the state, then > > + * re-enable the IRQ which has been disabled by SCU > > + * > > + * @nb: secvio device > > + * @event: The id of the IRQ received in a group > > + * @group: The group of the IRQ > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int imx_secvio_sc_notify(struct notifier_block *nb, > > + unsigned long event, void *group) { > > + struct imx_secvio_sc_data *data = > > + container_of(nb, struct imx_secvio_sc_data, > > + irq_nb); > > + struct device *dev = data->dev; > > + int ret = 0; > > + > > + /* Filter event for us */ > > + if (!((event & IMX_SC_IRQ_SECVIO) && > > + (*(u8 *)group == IMX_SC_IRQ_GROUP_WAKE))) > > + goto exit; > > + > > + dev_warn(dev, "secvio security violation detected\n"); > > + > > + ret = int_imx_secvio_sc_check_state(dev); > > + > > + /* Re-enable interrupt */ > > + ret = int_imx_secvio_sc_enable_irq(dev); > > + if (ret) > > + dev_err(dev, "Failed to enable IRQ\n"); > > + > > +exit: > > + return ret; > > +} > > + > > +/** > > + * int_imx_secvio_sc_clear_state() - Clear secvio and tamper state > > + * > > + * @dev: secvio device > > + * @hpsvs: high power security violation status to clear > > + * @lps: low power status to clear > > + * @lptds: low power tamper detector status to clear > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int int_imx_secvio_sc_clear_state(struct device *dev, u32 hpsvs, u32 > lps, > > + u32 lptds) > > +{ > > + int ret = 0; > > + > > + ret = call_secvio_config(dev, HPSVS_ID, SECVIO_CONFIG_WRITE, &hpsvs, > > + NULL, NULL, NULL, NULL, 1); > > + if (ret) { > > + dev_err(dev, "Cannot clear secvio status: %d\n", ret); > > + goto exit; > > + } > > + > > + ret = call_secvio_config(dev, LPS_ID, SECVIO_CONFIG_WRITE, &lps, NULL, > > + NULL, NULL, NULL, 1); > > + if (ret) { > > + dev_err(dev, "Cannot clear tamper 1 status: %d\n", ret); > > + goto exit; > > + } > > + > > + ret = call_secvio_config(dev, LPTDS_ID, SECVIO_CONFIG_WRITE, &lptds, > > + NULL, NULL, NULL, NULL, 1); > > + if (ret) { > > + dev_err(dev, "Cannot clear tamper 2 status: %d\n", ret); > > + goto exit; > > + } > > + > > +exit: > > + return ret; > > +} > > + > > +/** > > + * imx_secvio_sc_clear_state() - Wrapper for > > +imx_secvio_sc_clear_state > > + * > > + * @hpsvs: high power security violation status to clear > > + * @lps: low power status to clear > > + * @lptds: low power tamper detector status to clear > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +inline int imx_secvio_sc_clear_state(u32 hpsvs, u32 lps, u32 lptds) { > > + if (!gs_imx_secvio_sc_dev) > > + return -EOPNOTSUPP; > > + > > + return int_imx_secvio_sc_clear_state(gs_imx_secvio_sc_dev, hpsvs, lps, > > + lptds); > > +} > > +EXPORT_SYMBOL(imx_secvio_sc_clear_state); > > + > > +/** > > + * report_to_user_notify() - Print to console the status > > + * > > + * @nb: notifier block > > + * @status: error code > > + * @notif_info: Pointer on structure containing the status of the > > +secvio and > > + * tampers > > + * > > + * Return: > > + * 0 - OK > > + */ > > +static int report_to_user_notify(struct notifier_block *nb, > > + unsigned long status, void *notif_info) { > > + struct secvio_sc_notifier_info *info = notif_info; > > + struct imx_secvio_sc_data *data = > > + container_of(nb, struct imx_secvio_sc_data, > > + report_nb); > > + struct device *dev = data->dev; > > + > > + /* Information about the security violation */ > > + if (info->hpsvs & HPSVS__LP_SEC_VIO__MASK) > > + dev_info(dev, "SNVS secvio: LPSV\n"); > > + if (info->hpsvs & HPSVS__SW_LPSV__MASK) > > + dev_info(dev, "SNVS secvio: SW LPSV\n"); > > + if (info->hpsvs & HPSVS__SW_FSV__MASK) > > + dev_info(dev, "SNVS secvio: SW FSV\n"); > > + if (info->hpsvs & HPSVS__SW_SV__MASK) > > + dev_info(dev, "SNVS secvio: SW SV\n"); > > + if (info->hpsvs & HPSVS__SV5__MASK) > > + dev_info(dev, "SNVS secvio: SV 5\n"); > > + if (info->hpsvs & HPSVS__SV4__MASK) > > + dev_info(dev, "SNVS secvio: SV 4\n"); > > + if (info->hpsvs & HPSVS__SV3__MASK) > > + dev_info(dev, "SNVS secvio: SV 3\n"); > > + if (info->hpsvs & HPSVS__SV2__MASK) > > + dev_info(dev, "SNVS secvio: SV 2\n"); > > + if (info->hpsvs & HPSVS__SV1__MASK) > > + dev_info(dev, "SNVS secvio: SV 1\n"); > > + if (info->hpsvs & HPSVS__SV0__MASK) > > + dev_info(dev, "SNVS secvio: SV 0\n"); > > + > > + /* Information about the tampers */ > > + if (info->lps & LPS__ESVD__MASK) > > + dev_info(dev, "SNVS tamper: External SV\n"); > > + if (info->lps & LPS__ET2D__MASK) > > + dev_info(dev, "SNVS tamper: Tamper 2\n"); > > + if (info->lps & LPS__ET1D__MASK) > > + dev_info(dev, "SNVS tamper: Tamper 1\n"); > > + if (info->lps & LPS__WMT2D__MASK) > > + dev_info(dev, "SNVS tamper: Wire Mesh 2\n"); > > + if (info->lps & LPS__WMT1D__MASK) > > + dev_info(dev, "SNVS tamper: Wire Mesh 1\n"); > > + if (info->lps & LPS__VTD__MASK) > > + dev_info(dev, "SNVS tamper: Voltage\n"); > > + if (info->lps & LPS__TTD__MASK) > > + dev_info(dev, "SNVS tamper: Temperature\n"); > > + if (info->lps & LPS__CTD__MASK) > > + dev_info(dev, "SNVS tamper: Clock\n"); > > + if (info->lps & LPS__PGD__MASK) > > + dev_info(dev, "SNVS tamper: Power Glitch\n"); > > + if (info->lps & LPS__MCR__MASK) > > + dev_info(dev, "SNVS tamper: Monotonic Counter rollover\n"); > > + if (info->lps & LPS__SRTCR__MASK) > > + dev_info(dev, "SNVS tamper: Secure RTC rollover\n"); > > + if (info->lps & LPS__LPTA__MASK) > > + dev_info(dev, "SNVS tamper: Time alarm\n"); > > + > > + if (info->lptds & LPTDS__ET10D__MASK) > > + dev_info(dev, "SNVS tamper: Tamper 10\n"); > > + if (info->lptds & LPTDS__ET9D__MASK) > > + dev_info(dev, "SNVS tamper: Tamper 9\n"); > > + if (info->lptds & LPTDS__ET8D__MASK) > > + dev_info(dev, "SNVS tamper: Tamper 8\n"); > > + if (info->lptds & LPTDS__ET7D__MASK) > > + dev_info(dev, "SNVS tamper: Tamper 7\n"); > > + if (info->lptds & LPTDS__ET6D__MASK) > > + dev_info(dev, "SNVS tamper: Tamper 6\n"); > > + if (info->lptds & LPTDS__ET5D__MASK) > > + dev_info(dev, "SNVS tamper: Tamper 5\n"); > > + if (info->lptds & LPTDS__ET4D__MASK) > > + dev_info(dev, "SNVS tamper: Tamper 4\n"); > > + if (info->lptds & LPTDS__ET3D__MASK) > > + dev_info(dev, "SNVS tamper: Tamper 3\n"); > > + > > + return 0; > > +} > > + > > +/** > > + * int_imx_secvio_sc_enable_irq() - Enable the secvio IRQ in SCU > > + * > > + * @dev: secvio device > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int int_imx_secvio_sc_enable_irq(struct device *dev) { > > + int ret = 0, ret2; > > + u32 irq_status; > > + struct imx_secvio_sc_data *data; > > + > > + data = dev_get_drvdata(dev); > > + > > + /* Enable the IRQ */ > > + ret = imx_scu_irq_group_enable(IMX_SC_IRQ_GROUP_WAKE, > IMX_SC_IRQ_SECVIO, > > + true); > > + if (ret) { > > + dev_err(dev, "Cannot enable SCU IRQ: %d\n", ret); > > + goto exit; > > + } > > + > > + /* Enable interrupt */ > > + ret = imx_sc_seco_secvio_enable(data->ipc_handle); > > + if (ret) { > > + dev_err(dev, "Cannot enable SNVS irq: %d\n", ret); > > + goto exit; > > + }; > > + > > + /* Unmask interrupt */ > > + ret = imx_scu_irq_get_status(IMX_SC_IRQ_GROUP_WAKE, &irq_status); > > + if (ret) { > > + dev_err(dev, "Cannot unmask irq: %d\n", ret); > > + goto exit; > > + }; > > + > > +exit: > > + if (ret) { > > + ret2 = int_imx_secvio_sc_disable_irq(dev); > > + if (ret2) > > + dev_warn(dev, "Failed to disable the IRQ\n"); > > + } > > + > > + return ret; > > +} > > + > > +/** > > + * int_imx_secvio_sc_disable_irq() - Disable secvio IRQ > > + * > > + * @dev: secvio device > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int int_imx_secvio_sc_disable_irq(struct device *dev) { > > + int ret = 0; > > + struct imx_secvio_sc_data *data; > > + > > + data = dev_get_drvdata(dev); > > + > > + /* Disable the IRQ */ > > + ret = imx_scu_irq_group_enable(IMX_SC_IRQ_GROUP_WAKE, > IMX_SC_IRQ_SECVIO, > > + false); > > + if (ret) { > > + dev_err(dev, "Cannot disable SCU IRQ: %d\n", ret); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +/** > > + * if_imx_secvio_sc_disable_irq() - Wrapper for > > +int_imx_secvio_sc_disable_irq > > + * > > + * Can be used with devm > > + * > > + * @dev: secvio device > > + */ > > +static void if_imx_secvio_sc_disable_irq(void *dev) { > > + int_imx_secvio_sc_disable_irq(dev); > > +} > > + > > +/** > > + * imx_secvio_sc_open() - Store node info for ioctl > > + * > > + * @node: inode > > + * @file: file used to perform the ioctl > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int imx_secvio_sc_open(struct inode *node, struct file *filp) > > +{ > > + filp->private_data = node->i_private; > > + > > + return 0; > > +} > > + > > +/** > > + * imx_secvio_sc_ioctl() - IOCTL handler for the driver > > + * > > + * @file: file used to perform the ioctl > > + * @cmd: command to perform > > + * @arg: Pointer on structure with info for the command > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static long imx_secvio_sc_ioctl(struct file *file, unsigned int cmd, > > +unsigned long arg) { > > + struct device *dev = file->private_data; > > + struct secvio_sc_notifier_info info; > > + int ret; > > + > > + switch (cmd) { > > + case IMX_SECVIO_SC_GET_STATE: > > + ret = int_imx_secvio_sc_get_state(dev, &info); > > + if (ret) { > > + dev_err(dev, "Fail to get state\n"); > > + goto exit; > > + } > > + > > + ret = copy_to_user((void *)arg, &info, sizeof(info)); > > + if (ret) { > > + dev_err(dev, "Fail to copy info to user\n"); > > + ret = -EFAULT; > > + goto exit; > > + } > > + break; > > + case IMX_SECVIO_SC_CHECK_STATE: > > + ret = int_imx_secvio_sc_check_state(dev); > > + if (ret) { > > + dev_err(dev, "Fail to check state\n"); > > + goto exit; > > + } > > + break; > > + case IMX_SECVIO_SC_CLEAR_STATE: > > + ret = copy_from_user(&info, (void *)arg, sizeof(info)); > > + if (ret) { > > + dev_err(dev, "Fail to copy info from user\n"); > > + ret = -EFAULT; > > + goto exit; > > + } > > + > > + ret = int_imx_secvio_sc_clear_state(dev, info.hpsvs, info.lps, > > + info.lptds); > > + if (ret) { > > + dev_err(dev, "Fail to clear state\n"); > > + goto exit; > > + } > > + break; > > + default: > > + ret = -ENOIOCTLCMD; > > + } > > + > > +exit: > > + return ret; > > +} > > + > > +const static struct file_operations imx_secvio_sc_fops = { > > + .owner = THIS_MODULE, > > + .open = imx_secvio_sc_open, > > + .unlocked_ioctl = imx_secvio_sc_ioctl, }; > > + > > +static void if_misc_deregister(void *miscdevice) { > > + misc_deregister(miscdevice); > > +} > > + > > +static void reset_global_dev(void *dev) { > > + gs_imx_secvio_sc_dev = NULL; > > +} > > + > > +/** > > + * imx_secvio_sc_setup() - Configure the driver > > + * > > + * @dev: secvio device > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int imx_secvio_sc_setup(struct device *dev) { > > + struct imx_secvio_sc_data *data; > > + u32 seco_version = 0; > > + bool own_secvio; > > + u32 irq_status; > > + int ret = 0; > > + > > + if (!devres_open_group(dev, NULL, GFP_KERNEL)) { > > + ret = -ENOMEM; > > + goto exit; > > + } > > + > > + /* Allocate private data */ > > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > > + if (!data) { > > + ret = -ENOMEM; > > + dev_err(dev, "Failed to allocate mem for data\n"); > > + goto clean; > > + } > > + > > + data->dev = dev; > > + > > + dev_set_drvdata(dev, data); > > + > > + data->nvmem = devm_nvmem_device_get(dev, NULL); > > + if (IS_ERR(data->nvmem)) { > > + ret = PTR_ERR(data->nvmem); > > + if (ret != -EPROBE_DEFER) > > + dev_err(dev, "Failed to retrieve nvmem\n"); > > + > > + goto clean; > > + } > > + > > + /* Get a handle */ > > + ret = imx_scu_get_handle(&data->ipc_handle); > > + if (ret) { > > + dev_err(dev, "cannot get handle to scu: %d\n", ret); > > + goto clean; > > + }; > > + > > + /* Check the version of the SECO */ > > + ret = imx_sc_seco_build_info(data->ipc_handle, &seco_version, NULL); > > + if (ret) { > > + dev_err(dev, "Failed to get seco version\n"); > > + goto clean; > > + } > > + > > + if ((seco_version & SECO_VERSION_MINOR_MASK) < > > + SECO_MINOR_VERSION_SUPPORT_SECVIO_TAMPER) { > > + dev_err(dev, "SECO version %.8x doesn't support all secvio\n", > > + seco_version); > > + ret = -EOPNOTSUPP; > > + goto clean; > > + } > > + > > + /* Init debug FS */ > > + ret = imx_secvio_sc_debugfs(dev); > > + if (ret) { > > + dev_err(dev, "Failed to set debugfs\n"); > > + goto clean; > > + } > > + > > + /* Check we own the SECVIO */ > > + ret = imx_sc_rm_is_resource_owned(data->ipc_handle, > IMX_SC_R_SECVIO); > > + if (ret < 0) { > > + dev_err(dev, "Failed to retrieve secvio ownership\n"); > > + goto clean; > > + } > > + > > + own_secvio = ret > 0; > > + if (!own_secvio) { > > + dev_err(dev, "Secvio resource is not owned\n"); > > + ret = -EPERM; > > + goto clean; > > + } > > + > > + /* Check IRQ exists and enable it */ > > + ret = imx_scu_irq_get_status(IMX_SC_IRQ_GROUP_WAKE, &irq_status); > > + if (ret) { > > + dev_err(dev, "Cannot get IRQ state: %d\n", ret); > > + goto clean; > > + } > > + > > + ret = int_imx_secvio_sc_enable_irq(dev); > > + if (ret) { > > + dev_err(dev, "Failed to enable IRQ\n"); > > + goto clean; > > + } > > + > > + ret = devm_add_action_or_reset(dev, if_imx_secvio_sc_disable_irq, dev); > > + if (ret) { > > + dev_err(dev, "Failed to add managed action to disable IRQ\n"); > > + goto clean; > > + } > > + > > + /* Register the notifier for IRQ from SNVS */ > > + data->irq_nb.notifier_call = imx_secvio_sc_notify; > > + ret = imx_scu_irq_register_notifier(&data->irq_nb); > > + if (ret) { > > + dev_err(dev, "Failed to register IRQ notification handler\n"); > > + goto clean; > > + } > > + > > + ret = devm_add_action_or_reset(dev, > > if_unregister_imx_secvio_sc_notifier, > > + &data->irq_nb); > > + if (ret) { > > + dev_err(dev, "Failed to add action to remove irq notify\n"); > > + goto clean; > > + } > > + > > + /* Register the notification for reporting to user */ > > + data->report_nb.notifier_call = report_to_user_notify; > > + ret = register_imx_secvio_sc_notifier(&data->report_nb); > > + if (ret) { > > + dev_err(dev, "Failed to register report notify handler\n"); > > + goto clean; > > + } > > + > > + ret = devm_add_action_or_reset(dev, > > if_unregister_imx_secvio_sc_notifier, > > + &data->report_nb); > > + if (ret) { > > + dev_err(dev, "Failed to add action to remove report notify\n"); > > + goto clean; > > + } > > + > > + /* Register the notification to report to audit FW */ > > + data->audit_nb.notifier_call = report_to_audit_notify; > > + ret = register_imx_secvio_sc_notifier(&data->audit_nb); > > + if (ret) { > > + dev_err(dev, "Failed to register report audit handler\n"); > > + goto clean; > > + } > > + > > + ret = devm_add_action(dev, if_unregister_imx_secvio_sc_notifier, > > + &data->audit_nb); > > + if (ret) { > > + dev_err(dev, "Failed to add action to remove audit notif\n"); > > + goto clean; > > + } > > + > > + /* Register misc device for IOCTL */ > > + data->miscdev.name = devm_kstrdup(dev, "secvio-sc", GFP_KERNEL); > > + data->miscdev.minor = MISC_DYNAMIC_MINOR; > > + data->miscdev.fops = &imx_secvio_sc_fops; > > + data->miscdev.parent = dev; > > + ret = misc_register(&data->miscdev); > > + if (ret) { > > + dev_err(dev, "failed to register misc device\n"); > > + goto exit; > > + } > > + > > + ret = devm_add_action_or_reset(dev, if_misc_deregister, &data->miscdev); > > + if (ret) { > > + dev_err(dev, "Failed to add action to unregister miscdev\n"); > > + goto clean; > > + } > > + > > + gs_imx_secvio_sc_dev = dev; > > + ret = devm_add_action_or_reset(dev, reset_global_dev, dev); > > + if (ret) { > > + dev_err(dev, "Failed to add action to disable global dev\n"); > > + goto clean; > > + } > > + > > + /* Process current state of the secvio and tampers */ > > + int_imx_secvio_sc_check_state(dev); > > + > > + devres_remove_group(dev, NULL); > > + > > + goto exit; > > + > > +clean: > > + devres_release_group(dev, NULL); > > + > > +exit: > > + return ret; > > +} > > + > > +/** > > + * imx_secvio_sc_probe() - Probe the driver > > + * > > + * @pdev: platform device > > + * > > + * Return: > > + * 0 - OK > > + * < 0 - error. > > + */ > > +static int imx_secvio_sc_probe(struct platform_device *pdev) { > > + int ret; > > + struct device *dev = &pdev->dev; > > + > > + ret = imx_secvio_sc_setup(dev); > > + if (ret && ret != -EPROBE_DEFER) > > + dev_err(dev, "Failed to setup\n"); > > + > > + return ret; > > +} > > + > > +static const struct of_device_id imx_secvio_sc_dt_ids[] = { > > + { .compatible = "fsl,imx-sc-secvio", }, > > + { /* sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, imx_secvio_sc_dt_ids); > > + > > +static struct platform_driver imx_secvio_sc_driver = { > > + .driver = { > > + .owner = THIS_MODULE, > > + .name = "imx-secvio-sc", > > + .of_match_table = imx_secvio_sc_dt_ids, > > + }, > > + .probe = imx_secvio_sc_probe, > > +}; > > +module_platform_driver(imx_secvio_sc_driver); > > + > > +MODULE_AUTHOR("Franck LENORMAND <franck.lenorm...@nxp.com>"); > > +MODULE_DESCRIPTION("NXP i.MX driver to handle SNVS secvio irq sent by > > +SCFW"); MODULE_LICENSE("GPL"); > > diff --git a/include/soc/imx/imx-secvio-sc.h > > b/include/soc/imx/imx-secvio-sc.h new file mode 100644 index > > 0000000..a26e2ff > > --- /dev/null > > +++ b/include/soc/imx/imx-secvio-sc.h > > @@ -0,0 +1,177 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > +/* > > + * Copyright 2019-2020 NXP > > + */ > > + > > +#ifndef _MISC_IMX_SECVIO_SC_H_ > > +#define _MISC_IMX_SECVIO_SC_H_ > > + > > +#include <linux/kernel.h> > > +#include <linux/notifier.h> > > + > > +/* Bitmask of the security violation status bit in the HPSVS register > > +*/ #define HPSVS__LP_SEC_VIO__MASK BIT(31) > > +#define HPSVS__SW_LPSV__MASK BIT(15) > > +#define HPSVS__SW_FSV__MASK BIT(14) > > +#define HPSVS__SW_SV__MASK BIT(13) > > +#define HPSVS__SV5__MASK BIT(5) > > +#define HPSVS__SV4__MASK BIT(4) > > +#define HPSVS__SV3__MASK BIT(3) > > +#define HPSVS__SV2__MASK BIT(2) > > +#define HPSVS__SV1__MASK BIT(1) > > +#define HPSVS__SV0__MASK BIT(0) > > + > > +/* Bitmask of all security violation status bit in the HPSVS register > > +*/ #define HPSVS__ALL_SV__MASK (HPSVS__LP_SEC_VIO__MASK | \ > > + HPSVS__SW_LPSV__MASK | \ > > + HPSVS__SW_FSV__MASK | \ > > + HPSVS__SW_SV__MASK | \ > > + HPSVS__SV5__MASK | \ > > + HPSVS__SV4__MASK | \ > > + HPSVS__SV3__MASK | \ > > + HPSVS__SV2__MASK | \ > > + HPSVS__SV1__MASK | \ > > + HPSVS__SV0__MASK) > > + > > +/* > > + * Bitmask of the security violation and tampers status bit in the > > +LPS register */ #define LPS__ESVD__MASK BIT(16) #define > > +LPS__ET2D__MASK BIT(10) #define LPS__ET1D__MASK BIT(9) #define > > +LPS__WMT2D__MASK BIT(8) #define LPS__WMT1D__MASK BIT(7) > > +#define LPS__VTD__MASK BIT(6) > > +#define LPS__TTD__MASK BIT(5) > > +#define LPS__CTD__MASK BIT(4) > > +#define LPS__PGD__MASK BIT(3) > > +#define LPS__MCR__MASK BIT(2) > > +#define LPS__SRTCR__MASK BIT(1) > > +#define LPS__LPTA__MASK BIT(0) > > + > > +/* > > + * Bitmask of all security violation and tampers status bit in the LPS > > register > > + */ > > +#define LPS__ALL_TP__MASK (LPS__ESVD__MASK | \ > > + LPS__ET2D__MASK | \ > > + LPS__ET1D__MASK | \ > > + LPS__WMT2D__MASK | \ > > + LPS__WMT1D__MASK | \ > > + LPS__VTD__MASK | \ > > + LPS__TTD__MASK | \ > > + LPS__CTD__MASK | \ > > + LPS__PGD__MASK | \ > > + LPS__MCR__MASK | \ > > + LPS__SRTCR__MASK | \ > > + LPS__LPTA__MASK) > > + > > +/* > > + * Bitmask of the security violation and tampers status bit in the LPTDS > > + * register > > + */ > > +#define LPTDS__ET10D__MASK BIT(7) > > +#define LPTDS__ET9D__MASK BIT(6) > > +#define LPTDS__ET8D__MASK BIT(5) > > +#define LPTDS__ET7D__MASK BIT(4) > > +#define LPTDS__ET6D__MASK BIT(3) > > +#define LPTDS__ET5D__MASK BIT(2) > > +#define LPTDS__ET4D__MASK BIT(1) > > +#define LPTDS__ET3D__MASK BIT(0) > > + > > +/* > > + * Bitmask of all security violation and tampers status bit in the LPTDS > > + * register > > + */ > > +#define LPTDS__ALL_TP__MASK (LPTDS__ET10D__MASK | \ > > + LPTDS__ET9D__MASK | \ > > + LPTDS__ET8D__MASK | \ > > + LPTDS__ET7D__MASK | \ > > + LPTDS__ET6D__MASK | \ > > + LPTDS__ET5D__MASK | \ > > + LPTDS__ET4D__MASK | \ > > + LPTDS__ET3D__MASK) > > + > > +/** > > + * struct secvio_sc_notifier_info - Information about the status of the > > SNVS > > + * @hpsvs: status from register HPSVS > > + * @lps: status from register LPS > > + * @lptds: status from register LPTDS > > + */ > > +struct secvio_sc_notifier_info { > > + u32 hpsvs; > > + u32 lps; > > + u32 lptds; > > +}; > > + > > +/** > > + * register_imx_secvio_sc_notifier() - Register a notifier > > + * > > + * @nb: The notifier block structure > > + * > > + * Register a function to notify to the imx-secvio-sc module. The function > > + * will be notified when a check of the state of the SNVS happens: called > > by > > + * a user or triggered by an interruption form the SNVS. > > + * > > + * The struct secvio_sc_notifier_info is passed as data to the notifier. > > + * > > + * Return: 0 in case of success > > + */ > > +int register_imx_secvio_sc_notifier(struct notifier_block *nb); > > + > > +/** > > + * unregister_imx_secvio_sc_notifier() - Unregister a notifier > > + * > > + * @nb: The notifier block structure > > + * > > + * Return: 0 in case of success > > + */ > > +int unregister_imx_secvio_sc_notifier(struct notifier_block *nb); > > + > > +/** > > + * imx_secvio_sc_get_state() - Get the state of the SNVS > > + * > > + * @info: The structure containing the state of the SNVS > > + * > > + * Return: 0 in case of success > > + */ > > +int imx_secvio_sc_get_state(struct secvio_sc_notifier_info *info); > > + > > +/** > > + * imx_secvio_sc_check_state() - Check the state of the SNVS > > + * > > + * If a security violation or a tamper is detected, the list of notifier > > + * (registered using register_imx_secvio_sc_notifier() ) will be called > > + * > > + * Return: 0 in case of success > > + */ > > +int imx_secvio_sc_check_state(void); > > + > > +/** > > + * imx_secvio_sc_clear_state() - Clear the state of the SNVS > > + * > > + * @hpsvs: Value to write to HPSVS register > > + * @lps: Value to write to LPS register > > + * @lptds: Value to write to LPTDSregister > > + * > > + * The function will write the value provided to the corresponding register > > + * which will clear the status of the bits set. > > + * > > + * Return: 0 in case of success > > + */ > > +int imx_secvio_sc_clear_state(u32 hpsvs, u32 lps, u32 lptds); > > + > > +/* Commands of the ioctl interface */ > > +enum ioctl_cmd_t { > > + GET_STATE, > > + CHECK_STATE, > > + CLEAR_STATE, > > +}; > > + > > +/* Definition for the ioctl interface */ > > +#define IMX_SECVIO_SC_GET_STATE _IOR('S', GET_STATE, \ > > + struct secvio_sc_notifier_info) > > +#define IMX_SECVIO_SC_CHECK_STATE _IO('S', CHECK_STATE) > > +#define IMX_SECVIO_SC_CLEAR_STATE _IOW('S', CLEAR_STATE, \ > > + struct secvio_sc_notifier_info) > > + > > +#endif /* _MISC_IMX_SECVIO_SC_H_ */ > > -- > > 2.7.4 > >