[PATCH] thermal: sun8i: Use bitmap API instead of open code

[Frank Lee]

From: Yangtao Li <fr...@allwinnertech.com>

Thw bitmap_* API is the standard way to access data in the bitfield.

Signed-off-by: Yangtao Li <fr...@allwinnertech.com>
---
 drivers/thermal/sun8i_thermal.c | 35 +++++++++++++++++----------------
 1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index f8b13071a6f4..f2e4a4f18101 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -8,6 +8,7 @@
  * Based on the work of Josef Gajdusek <a...@atx.name>
  */
 
+#include <linux/bitmap.h>
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
@@ -74,7 +75,7 @@ struct ths_thermal_chip {
        int             (*calibrate)(struct ths_device *tmdev,
                                     u16 *caldata, int callen);
        int             (*init)(struct ths_device *tmdev);
-       int             (*irq_ack)(struct ths_device *tmdev);
+       void            (*irq_ack)(struct ths_device *tmdev);
        int             (*calc_temp)(struct ths_device *tmdev,
                                     int id, int reg);
 };
@@ -82,6 +83,7 @@ struct ths_thermal_chip {
 struct ths_device {
        const struct ths_thermal_chip           *chip;
        struct device                           *dev;
+       DECLARE_BITMAP(irq_bitmap, MAX_SENSOR_NUM);
        struct regmap                           *regmap;
        struct reset_control                    *reset;
        struct clk                              *bus_clk;
@@ -146,9 +148,11 @@ static const struct regmap_config config = {
        .max_register = 0xfc,
 };
 
-static int sun8i_h3_irq_ack(struct ths_device *tmdev)
+static void sun8i_h3_irq_ack(struct ths_device *tmdev)
 {
-       int i, state, ret = 0;
+       int i, state;
+
+       bitmap_zero(tmdev->irq_bitmap, tmdev->chip->sensor_num);
 
        regmap_read(tmdev->regmap, SUN8I_THS_IS, &state);
 
@@ -156,16 +160,16 @@ static int sun8i_h3_irq_ack(struct ths_device *tmdev)
                if (state & SUN8I_THS_DATA_IRQ_STS(i)) {
                        regmap_write(tmdev->regmap, SUN8I_THS_IS,
                                     SUN8I_THS_DATA_IRQ_STS(i));
-                       ret |= BIT(i);
+                       bitmap_set(tmdev->irq_bitmap, i, 1);
                }
        }
-
-       return ret;
 }
 
-static int sun50i_h6_irq_ack(struct ths_device *tmdev)
+static void sun50i_h6_irq_ack(struct ths_device *tmdev)
 {
-       int i, state, ret = 0;
+       int i, state;
+
+       bitmap_zero(tmdev->irq_bitmap, tmdev->chip->sensor_num);
 
        regmap_read(tmdev->regmap, SUN50I_H6_THS_DIS, &state);
 
@@ -173,24 +177,21 @@ static int sun50i_h6_irq_ack(struct ths_device *tmdev)
                if (state & SUN50I_H6_THS_DATA_IRQ_STS(i)) {
                        regmap_write(tmdev->regmap, SUN50I_H6_THS_DIS,
                                     SUN50I_H6_THS_DATA_IRQ_STS(i));
-                       ret |= BIT(i);
+                       bitmap_set(tmdev->irq_bitmap, i, 1);
                }
        }
-
-       return ret;
 }
 
 static irqreturn_t sun8i_irq_thread(int irq, void *data)
 {
        struct ths_device *tmdev = data;
-       int i, state;
+       int i;
 
-       state = tmdev->chip->irq_ack(tmdev);
+       tmdev->chip->irq_ack(tmdev);
 
-       for (i = 0; i < tmdev->chip->sensor_num; i++) {
-               if (state & BIT(i))
-                       thermal_zone_device_update(tmdev->sensor[i].tzd,
-                                                  THERMAL_EVENT_UNSPECIFIED);
+       for_each_set_bit(i, tmdev->irq_bitmap, tmdev->chip->sensor_num) {
+               thermal_zone_device_update(tmdev->sensor[i].tzd,
+                                          THERMAL_EVENT_UNSPECIFIED);
        }
 
        return IRQ_HANDLED;
-- 
2.28.0