[PATCH V3 08/10] can: flexcan: rename macro FLEXCAN_QUIRK_SETUP_STOP_MODE -> FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR

[Joakim Zhang]

This patch intends to rename FLEXCAN_QUIRK_SETUP_STOP_MODE quirk
to FLEXCAN_QUIRK_SETUP_STOP_MODE_GRP for non-scu SoCs, coming patch will
add quirk for scu SoCs.

For non-scu SoCs, setup stop mode with GPR register.
For scu SoCs, setup stop mode with SCU firmware.

Signed-off-by: Joakim Zhang <qiangqing.zh...@nxp.com>
---
 drivers/net/can/flexcan.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 881799bd9c5e..8f578c867493 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -236,8 +236,8 @@
 #define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6)
 /* default to BE register access */
 #define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN BIT(7)
-/* Setup stop mode to support wakeup */
-#define FLEXCAN_QUIRK_SETUP_STOP_MODE BIT(8)
+/* Setup stop mode with GPR to support wakeup */
+#define FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR BIT(8)
 /* Support CAN-FD mode */
 #define FLEXCAN_QUIRK_SUPPORT_FD BIT(9)
 /* support memory detection and correction */
@@ -381,7 +381,7 @@ static const struct flexcan_devtype_data 
fsl_imx28_devtype_data = {
 static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
        .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
                FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | 
FLEXCAN_QUIRK_BROKEN_PERR_STATE |
-               FLEXCAN_QUIRK_SETUP_STOP_MODE,
+               FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR,
 };
 
 static const struct flexcan_devtype_data fsl_imx8qm_devtype_data = {
@@ -393,7 +393,7 @@ static const struct flexcan_devtype_data 
fsl_imx8qm_devtype_data = {
 static struct flexcan_devtype_data fsl_imx8mp_devtype_data = {
        .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
                FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
-               FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SETUP_STOP_MODE 
|
+               FLEXCAN_QUIRK_BROKEN_PERR_STATE | 
FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR |
                FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SUPPORT_ECC,
 };
 
@@ -2043,7 +2043,7 @@ static int flexcan_probe(struct platform_device *pdev)
        of_can_transceiver(dev);
        devm_can_led_init(dev);
 
-       if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE) {
+       if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR) {
                err = flexcan_setup_stop_mode(pdev);
                if (err)
                        dev_dbg(&pdev->dev, "failed to setup stop-mode\n");
-- 
2.17.1