On Sat, Oct 24, 2020 at 2:32 PM Coiby Xu <[email protected]> wrote:
>
> Print out the status of debounce filter as follows,
> $ cat /sys/kernel/debug/gpio|grep pin130
> pin130 interrupt is disabled| interrupt is masked| disable wakeup in
> S0i3 state| disable wakeup in S3 state|
> disable wakeup in S4/S5 state| input is high| pull-up is disabled|
> Pull-down is disabled| output is disabled| debouncing filter (high)
> enabled| debouncing timeout is 124800 (us)| 0x503c8
> + if (!tmr_large) {
> + if (!tmr_out_unit)
> + unit = 61;
> + else
> + unit = 244;
> + } else {
> + if (!tmr_out_unit)
> + unit = 15600;
> + else
> + unit = 62500;
> + }
In all three if:s can you use positive conditionals?
--
With Best Regards,
Andy Shevchenko
