On 2020/10/26, 10:21 AM, Andrew Jeffery wrote:
On Mon, 26 Oct 2020, at 12:33, Billy Tsai wrote:
>
> On 2020/10/26, 9:27 AM, Andrew Jeffery wrote:
>
> On Mon, 12 Oct 2020, at 14:01, Billy Tsai wrote:
> > > At ast2600a1 we change feature of master sgpio to 2 sets.
> > > So this patch is used to add the pinctrl setting of the new
> sgpio.
> > >
> > > Signed-off-by: Billy Tsai <billy_t...@aspeedtech.com>
> > > ---
> > > arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 5 ++++
> > > drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 30
> +++++++++++++++++++---
> > > 2 files changed, 31 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > > b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > > index 7028e21bdd98..a16ecf08e307 100644
> > > --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > > +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > > @@ -862,6 +862,11 @@
> > > groups = "SGPM1";
> > > };
> > >
> > > + pinctrl_sgpm2_default: sgpm2_default {
> > > + function = "SGPM2";
> > > + groups = "SGPM2";
> > > + };
> > > +
> > > pinctrl_sgps1_default: sgps1_default {
> > > function = "SGPS1";
> > > groups = "SGPS1";
> > > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> > > b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> > > index 34803a6c7664..b673a44ffa3b 100644
> > > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> > > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> > > @@ -46,8 +46,10 @@
> > > #define SCU620 0x620 /* Disable GPIO Internal
Pull-Down #4 */
> > > #define SCU634 0x634 /* Disable GPIO Internal
Pull-Down #5 */
> > > #define SCU638 0x638 /* Disable GPIO Internal
Pull-Down #6 */
> > > +#define SCU690 0x690 /* Multi-function Pin Control #24
*/
> > > #define SCU694 0x694 /* Multi-function Pin Control #25
*/
> > > #define SCU69C 0x69C /* Multi-function Pin Control #27
*/
> > > +#define SCU6D0 0x6D0 /* Multi-function Pin Control #28
*/
> > > #define SCUC20 0xC20 /* PCIE configuration Setting
Control */
> > >
> > > #define ASPEED_G6_NR_PINS 256
> > > @@ -81,13 +83,21 @@ FUNC_GROUP_DECL(I2C12, L26, K24);
> > > #define K26 4
> > > SIG_EXPR_LIST_DECL_SESG(K26, MACLINK1, MACLINK1,
> SIG_DESC_SET(SCU410, 4));
> > > SIG_EXPR_LIST_DECL_SESG(K26, SCL13, I2C13,
> SIG_DESC_SET(SCU4B0, 4));
> > > -PIN_DECL_2(K26, GPIOA4, MACLINK1, SCL13);
> > > +/*SGPM2 is A1 Only */
> > > +SIG_EXPR_LIST_DECL_SESG(K26, SGPM2CLK, SGPM2,
> SIG_DESC_SET(SCU6D0, 4),
> > > + SIG_DESC_CLEAR(SCU410, 4),
SIG_DESC_CLEAR(SCU4B0, 4),
> > > + SIG_DESC_CLEAR(SCU690, 4));
> > > +PIN_DECL_3(K26, GPIOA4, SGPM2CLK, MACLINK1, SCL13);
> > > FUNC_GROUP_DECL(MACLINK1, K26);
> > >
> > > #define L24 5
> > > SIG_EXPR_LIST_DECL_SESG(L24, MACLINK2, MACLINK2,
> SIG_DESC_SET(SCU410, 5));
> > > SIG_EXPR_LIST_DECL_SESG(L24, SDA13, I2C13,
> SIG_DESC_SET(SCU4B0, 5));
> > > -PIN_DECL_2(L24, GPIOA5, MACLINK2, SDA13);
> > > +/*SGPM2 is A1 Only */
> > > +SIG_EXPR_LIST_DECL_SESG(L24, SGPM2LD, SGPM2,
> SIG_DESC_SET(SCU6D0, 5),
> > > + SIG_DESC_CLEAR(SCU410, 5),
SIG_DESC_CLEAR(SCU4B0, 5),
> > > + SIG_DESC_CLEAR(SCU690, 5));
> >
> > A few things:
> >
> > 1. It looks like the Multi-function Pins Mapping and Control
> table in section 5.1 of the datasheet only tells part of the story. It
> lists SGPS2 on the pins you've modified in this patch but not SGPM2.
> However, the table in section 2.1 (Pin Description) does outline SGPM2
> and SGPS2 are routed via the same pins, though this does not listed the
> associated registers and bit fields. Can we fix the table in 5.1 so
> it's easier to review this patch?
> You can see section 5.2 to find SGPIO master interface table. It lists
> balls and register setting information of the SGPIOM1 and SGPIOM2.
Yep, though typically I use the table in 5.1 to figure out the pinctrl
details.
It appears you'd need to add another two columns to the table to capture
the
info - is Aspeed planning to do that in a future release of the datasheet?
Yes, we will update the datasheet to add another two columns.
> >
> > 2. We don't need to specify the _CLEAR() behaviour here as this
> is implied by the process to disable the higher priority mux
> configurations. It should be enough to do:
> >
> > SIG_EXPR_LIST_DECL_SESG(L24, SGPM2LD, SGPM2, SIG_DESC_SET(SCU6D0,
> 5));
> >
> > However, this requires that we also define the priorities
> correctly, so:
> >
> > 3. Can we add both the SGPS2 and SGPM2 configurations so we have
> a complete definition for the pins?
> >
> Thank you for your advice. I will complete the full configurations and
> send the V2 patch.
Thanks!
Andrew
