[PATCH v2 1/2] scsi: arcmsr: configure the default SCSI device command timeout value

[ching Huang]

From: ching Huang <ching2...@areca.com.tw>

Configure the default SCSI device command timeout value.

Signed-off-by: ching Huang <ching2...@areca.com.tw>
---

diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
index 5d054d5..0f6abd2 100644
--- a/drivers/scsi/arcmsr/arcmsr.h
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -83,6 +83,7 @@ struct device_attribute;
 #define PCI_DEVICE_ID_ARECA_1886       0x188A
 #define        ARCMSR_HOURS                    (1000 * 60 * 60 * 4)
 #define        ARCMSR_MINUTES                  (1000 * 60 * 60)
+#define ARCMSR_DEFAULT_TIMEOUT         90
 /*
 
**********************************************************************************
 **
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index e4fdb47..7cfae1d 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -99,6 +99,10 @@ static int set_date_time = 0;
 module_param(set_date_time, int, S_IRUGO);
 MODULE_PARM_DESC(set_date_time, " send date, time to iop(0 ~ 1), 
set_date_time=1(enable), default(=0) is disable");
 
+static int cmd_timeout = ARCMSR_DEFAULT_TIMEOUT;
+module_param(cmd_timeout, int, S_IRUGO);
+MODULE_PARM_DESC(cmd_timeout, " scsi cmd timeout(0 ~ 120 sec.), default is 
90");
+
 #define        ARCMSR_SLEEPTIME        10
 #define        ARCMSR_RETRYCOUNT       12
 
@@ -140,6 +144,7 @@ static irqreturn_t arcmsr_interrupt(struct 
AdapterControlBlock *acb);
 static void arcmsr_free_irq(struct pci_dev *, struct AdapterControlBlock *);
 static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb);
 static void arcmsr_set_iop_datetime(struct timer_list *);
+static int arcmsr_slave_config(struct scsi_device *sdev);
 static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev, int 
queue_depth)
 {
        if (queue_depth > ARCMSR_MAX_CMD_PERLUN)
@@ -155,6 +160,7 @@ static struct scsi_host_template arcmsr_scsi_host_template 
= {
        .eh_abort_handler       = arcmsr_abort,
        .eh_bus_reset_handler   = arcmsr_bus_reset,
        .bios_param             = arcmsr_bios_param,
+       .slave_configure        = arcmsr_slave_config,
        .change_queue_depth     = arcmsr_adjust_disk_queue_depth,
        .can_queue              = ARCMSR_DEFAULT_OUTSTANDING_CMD,
        .this_id                = ARCMSR_SCSI_INITIATOR_ID,
@@ -3256,6 +3262,16 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd 
*cmd,
 
 static DEF_SCSI_QCMD(arcmsr_queue_command)
 
+static int arcmsr_slave_config(struct scsi_device *sdev)
+{
+       unsigned int    dev_timeout;
+
+       dev_timeout = sdev->request_queue->rq_timeout;
+       if ((cmd_timeout > 0) && ((cmd_timeout * HZ) > dev_timeout))
+               blk_queue_rq_timeout(sdev->request_queue, cmd_timeout * HZ);
+       return 0;
+}
+
 static void arcmsr_get_adapter_config(struct AdapterControlBlock *pACB, 
uint32_t *rwbuffer)
 {
        int count;