On Wed, 28 Oct 2020 22:40:09 +0100, Łukasz Stelmach wrote:
> Add bindings for AX88796C SPI Ethernet Adapter.
>
> Signed-off-by: Łukasz Stelmach <[email protected]>
> ---
> .../bindings/net/asix,ax88796c.yaml | 69 +++++++++++++++++++
> 1 file changed, 69 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/asix,ax88796c.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/net/asix,ax88796c.example.dts:23.13-25:
Warning (reg_format): /example-0/ethernet@0:reg: property has invalid length (4
bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: Warning
(pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: Warning
(pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: Warning
(simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: Warning
(i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: Warning
(spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml:
example-0: ethernet@0:reg:0: [0] is too short
From schema:
/usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml:
ethernet@0: 'interrupt-parrent' is a required property
From schema:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/asix,ax88796c.yaml
See https://patchwork.ozlabs.org/patch/1389785
The base for the patch is generally the last rc1. Any dependencies
should be noted.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
