On 02/10/2020 18:39, Krzysztof Kozlowski wrote:
The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix. Signed-off-by: Krzysztof Kozlowski <[email protected]>
Pushed to v5.10-next/dts64 Thanks!
--- .../boot/dts/mediatek/pumpkin-common.dtsi | 26 +++++++++---------- 1 file changed, 13 insertions(+), 13 deletions(-) The dt-schema changes were applied. diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi index 29d8cf6df46b..351a1905a074 100644 --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi @@ -63,91 +63,91 @@ gpio-controller; #gpio-cells = <2>;- eint20_mux_sel0 {+ eint20-mux-sel0-hog { gpio-hog; gpios = <0 0>; input; line-name = "eint20_mux_sel0"; };- expcon_mux_sel1 {+ expcon-mux-sel1-hog { gpio-hog; gpios = <1 0>; input; line-name = "expcon_mux_sel1"; };- mrg_di_mux_sel2 {+ mrg-di-mux-sel2-hog { gpio-hog; gpios = <2 0>; input; line-name = "mrg_di_mux_sel2"; };- sd_sdio_mux_sel3 {+ sd-sdio-mux-sel3-hog { gpio-hog; gpios = <3 0>; input; line-name = "sd_sdio_mux_sel3"; };- sd_sdio_mux_ctrl7 {+ sd-sdio-mux-ctrl7-hog { gpio-hog; gpios = <7 0>; output-low; line-name = "sd_sdio_mux_ctrl7"; };- hw_id0 {+ hw-id0-hog { gpio-hog; gpios = <8 0>; input; line-name = "hw_id0"; };- hw_id1 {+ hw-id1-hog { gpio-hog; gpios = <9 0>; input; line-name = "hw_id1"; };- hw_id2 {+ hw-id2-hog { gpio-hog; gpios = <10 0>; input; line-name = "hw_id2"; };- fg_int_n {+ fg-int-n-hog { gpio-hog; gpios = <11 0>; input; line-name = "fg_int_n"; };- usba_pwr_en {+ usba-pwr-en-hog { gpio-hog; gpios = <12 0>; output-high; line-name = "usba_pwr_en"; };- wifi_3v3_pg {+ wifi-3v3-pg-hog { gpio-hog; gpios = <13 0>; input; line-name = "wifi_3v3_pg"; };- cam_rst {+ cam-rst-hog { gpio-hog; gpios = <14 0>; output-low; line-name = "cam_rst"; };- cam_pwdn {+ cam-pwdn-hog { gpio-hog; gpios = <15 0>; output-low;
