On Thu, 2020-10-29 at 11:10 +0100, Paul Kocialkowski wrote: > Hi, > > On Thu 29 Oct 20, 02:20, Matteo Scordino wrote: > > The Elimo Engineering Initium is an Open Source Hardware Single Board > > Computer based on the Elimo Impetus SoM. > > > > It is meant as the first development platform for the Impetus, providing > > convenient access to the peripherals on the Impetus. > > > > It provides: > > USB-C power input > > UART-to-USB bridge on the USB-C connector, connected to UART1 > > USB-A connector for USB2.0 (Host, Device, OTG) > > Audio Line In/Out > > Pin header to access all signals on the M2 connector of the SoM > > > > Signed-off-by: Matteo Scordino <[email protected]> > > --- > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 27 ++++++++++++++++++++ > > 2 files changed, 28 insertions(+) > > create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index 4f0adfead547..dcfb8d39c267 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -1210,6 +1210,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ > > sun8i-r40-bananapi-m2-ultra.dtb \ > > sun8i-s3-lichee-zero-plus.dtb \ > > sun8i-s3-pinecube.dtb \ > > + sun8i-s3-elimo-initium.dtb \ > > sun8i-t3-cqa3t-bv3.dtb \ > > sun8i-v3s-licheepi-zero.dtb \ > > sun8i-v3s-licheepi-zero-dock.dtb \ > > diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts > > b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts > > new file mode 100644 > > index 000000000000..5ddd4dbd636c > > --- /dev/null > > +++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts > > @@ -0,0 +1,27 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > +/* > > + * Copyright (C) 2020 Matteo Scordino <[email protected]> > > + */ > > + > > +/dts-v1/; > > +#include "sun8i-s3-elimo-impetus.dtsi" > > + > > +/ { > > + model = "Elimo Initium"; > > + compatible = "elimo,initium", "elimo,impetus", "allwinner,sun8i-s3"; > > Same comment as before about having an extra "allwinner,sun8i-v3" here. > > Cheers, > > Paul
As above, I will apply and resubmit
>
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + serial1 = &uart1;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +};
> > +
> > +&emac {
> > + phy-handle = <&int_mii_phy>;
> > + phy-mode = "mii";
> > + status = "okay";
> > +};
> > --
> > 2.20.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > [email protected]
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
signature.asc
Description: This is a digitally signed message part
