Hi Dafna,

On 10/26/20 2:50 PM, Dafna Hirschfeld wrote:
> Hi,
> 
> 
> Am 19.10.20 um 18:04 schrieb Helen Koike:
>> Allow streaming from self picture path and main picture path at the same
>> time.
>>
>> Take care for s_stream() callbacks to not be called twice.
>> When starting a stream, s_stream(true) shouldn't be called for the isp
>> and the sensor if the other stream is already enabled (since it was
>> already called).
>> When stopping a stream, s_stream(false) shouldn't be called for isp and
>> the sensor if the other stream is still enabled.
>>
>> Remove the callback function scheme for navigating through the topology,
>> simplifying the code, improving readability.
>>
>> Remove multistreaming item from the TODO list.
>>
>> Signed-off-by: Helen Koike <helen.ko...@collabora.com>
>> ---
>>
>> Hello,
>>
>> Since we didn't reach an agreement on the helpers in the core[1], I'm
>> sending this patch to fix this limitation only for rkisp1.
>>
>> [1] 
>> https://patchwork.linuxtv.org/project/linux-media/cover/20200415013044.1778572-1-helen.ko...@collabora.com/
>>
>> If we decide to add the helpers in the future, we can clean up drivers
>> even more, but I don't want to block this feature.
>>
>> This Patch depends on patch:
>> "media: staging: rkisp1: validate links before powering and streaming"
>> https://patchwork.linuxtv.org/project/linux-media/patch/20201002184222.7094-2-dafna.hirschf...@collabora.com/
>>
>> Changes in V2:
>> ==============
>> - Rebase on top of patch
>> "media: staging: rkisp1: validate links before powering and streaming"
>> which fixes media_pipeline_{start,stop}() calling order.
>> - Fix commit message
>> - Fix disable order
>> - Disable capture when s_stream(true) of the resizer fails
>>
>> Overview of the patch:
>> ======================
>>
>> * Rename rkisp1_stream_{start,stop}() to
>>    rkisp1_cap_stream_{enable,disable}() to clarify the difference between
>>    other stream enable/disable functions
>>
>> * Implement rkisp1_pipeline_stream_{enable,disable}() to replace
>>    rkisp1_pipeline_{enable,disable}_cb() and rkisp1_pipeline_sink_walk(),
>>    which were removed.
>>
>> * Call rkisp1_cap_stream_{enable,disable}() from
>>    rkisp1_pipeline_stream_{enable,disable}() for better
>>    unwind handling and function name semantics.
>>
>> * Remove item from TODO list (I also reviewed the use of the
>>    is_streaming var in the code and lgtm).
>>
>> This patch was tested on rockpi4 board with:
>> ============================================
>>
>> "media-ctl" "-d" "platform:rkisp1" "-r"
>> "media-ctl" "-d" "platform:rkisp1" "-l" "'imx219 4-0010':0 -> 'rkisp1_isp':0 
>> [1]"
>> "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 
>> 'rkisp1_resizer_selfpath':0 [1]"
>> "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 
>> 'rkisp1_resizer_mainpath':0 [1]"
>>
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"imx219 4-0010":0 
>> [fmt:SRGGB10_1X10/1640x1232]'
>>
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":0 
>> [fmt:SRGGB10_1X10/1640x1232 crop: (0,0)/1600x1200]'
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":2 
>> [fmt:YUYV8_2X8/1600x1200 crop: (0,0)/1500x1100]'
>>
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":0 
>> [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]'
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":1 
>> [fmt:YUYV8_2X8/900x800]'
>>
>> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" 
>> "width=900,height=800,"
>> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" 
>> "pixelformat=422P"
>>
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_mainpath":0 
>> [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]'
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_mainpath":1 
>> [fmt:YUYV8_2X8/900x800]'
>>
>> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_mainpath" "-v" 
>> "width=900,height=800,"
>> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_mainpath" "-v" 
>> "pixelformat=422P"
>>
>> sleep 1
>>
>> time v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_mainpath" "--stream-mmap" 
>> "--stream-count" "100" &
>> time v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "--stream-mmap" 
>> "--stream-count" "100" &
>>
>> wait
>> echo "Completed"
>>
>> Thanks
>> Helen
>> ---
>>   drivers/staging/media/rkisp1/TODO             |   3 -
>>   drivers/staging/media/rkisp1/rkisp1-capture.c | 219 +++++++++---------
>>   2 files changed, 110 insertions(+), 112 deletions(-)
>>
>> diff --git a/drivers/staging/media/rkisp1/TODO 
>> b/drivers/staging/media/rkisp1/TODO
>> index e7c8398fc2cef..a2dd0ad951c25 100644
>> --- a/drivers/staging/media/rkisp1/TODO
>> +++ b/drivers/staging/media/rkisp1/TODO
>> @@ -1,9 +1,6 @@
>>   * Fix pad format size for statistics and parameters entities.
>>   * Fix checkpatch errors.
>>   * Add uapi docs. Remember to add documentation of how quantization is 
>> handled.
>> -* streaming paths (mainpath and selfpath) check if the other path is 
>> streaming
>> -in several places of the code, review this, specially that it doesn't seem 
>> it
>> -supports streaming from both paths at the same time.
>>     NOTES:
>>   * All v4l2-compliance test must pass.
>> diff --git a/drivers/staging/media/rkisp1/rkisp1-capture.c 
>> b/drivers/staging/media/rkisp1/rkisp1-capture.c
>> index 9b4a12e13f135..13463c899b009 100644
>> --- a/drivers/staging/media/rkisp1/rkisp1-capture.c
>> +++ b/drivers/staging/media/rkisp1/rkisp1-capture.c
>> @@ -830,71 +830,43 @@ static void rkisp1_return_all_buffers(struct 
>> rkisp1_capture *cap,
>>   }
>>     /*
>> - * rkisp1_pipeline_sink_walk - Walk through the pipeline and call cb
>> - * @from: entity at which to start pipeline walk
>> - * @until: entity at which to stop pipeline walk
>> - *
>> - * Walk the entities chain starting at the pipeline video node and stop
>> - * all subdevices in the chain.
>> - *
>> - * If the until argument isn't NULL, stop the pipeline walk when reaching 
>> the
>> - * until entity. This is used to disable a partially started pipeline due 
>> to a
>> - * subdev start error.
>> + * Most of registers inside rockchip ISP1 have shadow register since
>> + * they must be not be changed during processing a frame.
>> + * Usually, each sub-module updates its shadow register after
>> + * processing the last pixel of a frame.
>>    */
>> -static int rkisp1_pipeline_sink_walk(struct media_entity *from,
>> -                     struct media_entity *until,
>> -                     int (*cb)(struct media_entity *from,
>> -                           struct media_entity *curr))
>> +static void rkisp1_cap_stream_enable(struct rkisp1_capture *cap)
>>   {
>> -    struct media_entity *entity = from;
>> -    struct media_pad *pad;
>> -    unsigned int i;
>> -    int ret;
>> -
>> -    while (1) {
>> -        pad = NULL;
>> -        /* Find remote source pad */
>> -        for (i = 0; i < entity->num_pads; i++) {
>> -            struct media_pad *spad = &entity->pads[i];
>> -
>> -            if (!(spad->flags & MEDIA_PAD_FL_SINK))
>> -                continue;
>> -            pad = media_entity_remote_pad(spad);
>> -            if (pad && is_media_entity_v4l2_subdev(pad->entity))
>> -                break;
>> -        }
>> -        if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
>> -            break;
>> +    struct rkisp1_device *rkisp1 = cap->rkisp1;
>> +    struct rkisp1_capture *other = &rkisp1->capture_devs[cap->id ^ 1];
>>   -        entity = pad->entity;
>> -        if (entity == until)
>> -            break;
>> +    cap->ops->set_data_path(cap);
>> +    cap->ops->config(cap);
>>   -        ret = cb(from, entity);
>> -        if (ret)
>> -            return ret;
>> +    /* Setup a buffer for the next frame */
>> +    spin_lock_irq(&cap->buf.lock);
>> +    rkisp1_set_next_buf(cap);
>> +    cap->ops->enable(cap);
>> +    /* It's safe to config ACTIVE and SHADOW regs for the
>> +     * first stream. While when the second is starting, do NOT
>> +     * force update because it also update the first one.
>> +     *
>> +     * The latter case would drop one more buf(that is 2) since
>> +     * there's not buf in shadow when the second FE received. This's
>> +     * also required because the second FE maybe corrupt especially
>> +     * when run at 120fps.
>> +     */
>> +    if (!other->is_streaming) {
>> +        /* force cfg update */
>> +        rkisp1_write(rkisp1,
>> +                 RKISP1_CIF_MI_INIT_SOFT_UPD, RKISP1_CIF_MI_INIT);
>> +        rkisp1_set_next_buf(cap);
>>       }
>> -
>> -    return 0;
>> -}
>> -
>> -static int rkisp1_pipeline_disable_cb(struct media_entity *from,
>> -                      struct media_entity *curr)
>> -{
>> -    struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(curr);
>> -
>> -    return v4l2_subdev_call(sd, video, s_stream, false);
>> -}
>> -
>> -static int rkisp1_pipeline_enable_cb(struct media_entity *from,
>> -                     struct media_entity *curr)
>> -{
>> -    struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(curr);
>> -
>> -    return v4l2_subdev_call(sd, video, s_stream, true);
>> +    spin_unlock_irq(&cap->buf.lock);
>> +    cap->is_streaming = true;
>>   }
>>   -static void rkisp1_stream_stop(struct rkisp1_capture *cap)
>> +static void rkisp1_cap_stream_disable(struct rkisp1_capture *cap)
>>   {
>>       int ret;
>>   @@ -911,6 +883,82 @@ static void rkisp1_stream_stop(struct rkisp1_capture 
>> *cap)
>>       }
>>   }
>>   +/*
>> + * rkisp1_pipeline_stream_disable - disable nodes in the pipeline
>> + *
>> + * Call s_stream(false) in the reverse order from
>> + * rkisp1_pipeline_stream_enable() and disable the DMA engine.
>> + * Should be called before media_pipeline_stop()
>> + */
>> +static void rkisp1_pipeline_stream_disable(struct rkisp1_capture *cap)
>> +    __must_hold(&cap->rkisp1->stream_lock)
>> +{
>> +    struct rkisp1_device *rkisp1 = cap->rkisp1;
>> +
>> +    /*
>> +     * If the other capture is streaming, isp and sensor nodes shouldn't
>> +     * be disabled, skip them.
>> +     */
>> +    if (rkisp1->pipe.streaming_count < 2) {
>> +        v4l2_subdev_call(rkisp1->active_sensor->sd, video, s_stream,
>> +                 false);
>> +        v4l2_subdev_call(&rkisp1->isp.sd, video, s_stream, false);
>> +    }
>> +
>> +    v4l2_subdev_call(&rkisp1->resizer_devs[cap->id].sd, video, s_stream,
>> +             false);
>> +
>> +    rkisp1_cap_stream_disable(cap);
>> +}
>> +
>> +/*
>> + * rkisp1_pipeline_stream_enable - enable nodes in the pipeline
>> + *
>> + * Enable the DMA Engine and call s_stream(true) through the pipeline.
>> + * Should be called after media_pipeline_start()
>> + */
>> +static int rkisp1_pipeline_stream_enable(struct rkisp1_capture *cap)
>> +    __must_hold(&cap->rkisp1->stream_lock)
>> +{
>> +    struct rkisp1_device *rkisp1 = cap->rkisp1;
>> +    int ret;
>> +
>> +    rkisp1_cap_stream_enable(cap);
>> +
>> +    ret = v4l2_subdev_call(&rkisp1->resizer_devs[cap->id].sd, video,
>> +                   s_stream, true);
>> +    if (ret)
>> +        goto err_disable_cap;
>> +
>> +    /*
>> +     * If the other capture is streaming, isp and sensor nodes are already
>> +     * enabled, skip them.
>> +     */
>> +    if (rkisp1->pipe.streaming_count > 1)
>> +        return 0;
>> +
>> +    ret = v4l2_subdev_call(&rkisp1->isp.sd, video, s_stream, true);
>> +    if (ret)
>> +        goto err_disable_rsz;
>> +
>> +    ret = v4l2_subdev_call(rkisp1->active_sensor->sd, video, s_stream,
>> +                   true);
>> +    if (ret)
>> +        goto err_disable_isp;
>> +
>> +    return 0;
>> +
>> +err_disable_isp:
>> +    v4l2_subdev_call(&rkisp1->isp.sd, video, s_stream, false);
>> +err_disable_rsz:
>> +    v4l2_subdev_call(&rkisp1->resizer_devs[cap->id].sd, video, s_stream,
>> +             false);
>> +err_disable_cap:
>> +    rkisp1_cap_stream_disable(cap);
>> +
>> +    return ret;
>> +}
>> +
>>   static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue)
>>   {
>>       struct rkisp1_capture *cap = queue->drv_priv;
>> @@ -920,12 +968,7 @@ static void rkisp1_vb2_stop_streaming(struct vb2_queue 
>> *queue)
>>         mutex_lock(&cap->rkisp1->stream_lock);
>>   -    rkisp1_stream_stop(cap);
>> -    ret = rkisp1_pipeline_sink_walk(&node->vdev.entity, NULL,
>> -                    rkisp1_pipeline_disable_cb);
>> -    if (ret)
>> -        dev_err(rkisp1->dev,
>> -            "pipeline stream-off failed error:%d\n", ret);
>> +    rkisp1_pipeline_stream_disable(cap);
>>         rkisp1_return_all_buffers(cap, VB2_BUF_STATE_ERROR);
>>   @@ -941,43 +984,6 @@ static void rkisp1_vb2_stop_streaming(struct 
>> vb2_queue *queue)
>>       mutex_unlock(&cap->rkisp1->stream_lock);
>>   }
>>   -/*
>> - * Most of registers inside rockchip ISP1 have shadow register since
>> - * they must be not be changed during processing a frame.
>> - * Usually, each sub-module updates its shadow register after
>> - * processing the last pixel of a frame.
>> - */
>> -static void rkisp1_stream_start(struct rkisp1_capture *cap)
>> -{
>> -    struct rkisp1_device *rkisp1 = cap->rkisp1;
>> -    struct rkisp1_capture *other = &rkisp1->capture_devs[cap->id ^ 1];
>> -
>> -    cap->ops->set_data_path(cap);
>> -    cap->ops->config(cap);
>> -
>> -    /* Setup a buffer for the next frame */
>> -    spin_lock_irq(&cap->buf.lock);
>> -    rkisp1_set_next_buf(cap);
>> -    cap->ops->enable(cap);
>> -    /* It's safe to config ACTIVE and SHADOW regs for the
>> -     * first stream. While when the second is starting, do NOT
>> -     * force update because it also update the first one.
>> -     *
>> -     * The latter case would drop one more buf(that is 2) since
>> -     * there's not buf in shadow when the second FE received. This's
>> -     * also required because the second FE maybe corrupt especially
>> -     * when run at 120fps.
>> -     */
>> -    if (!other->is_streaming) {
>> -        /* force cfg update */
>> -        rkisp1_write(rkisp1,
>> -                 RKISP1_CIF_MI_INIT_SOFT_UPD, RKISP1_CIF_MI_INIT);
>> -        rkisp1_set_next_buf(cap);
>> -    }
>> -    spin_unlock_irq(&cap->buf.lock);
>> -    cap->is_streaming = true;
>> -}
>> -
>>   static int
>>   rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
>>   {
>> @@ -1008,20 +1014,15 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, 
>> unsigned int count)
>>           goto err_pipe_pm_put;
>>       }
>>   -    rkisp1_stream_start(cap);
>> -
>> -    /* start sub-devices */
>> -    ret = rkisp1_pipeline_sink_walk(entity, NULL,
>> -                    rkisp1_pipeline_enable_cb);
> 
> We should also make sure that the resizer is connected to the isp
> and fail if not.

As I mentioned in the previous version, this is not required, since the
pad has MUST_CONNECT flag, media_piipeline_start() will catch it.

> otherwise,
> 
> Reviewed-by: Dafna Hirschfeld <dafna.hirschf...@collabora.com>

Thanks
Helen

> 
>> +    ret = rkisp1_pipeline_stream_enable(cap);
>>       if (ret)
>> -        goto err_stop_stream;
>> +        goto err_v4l2_pm_put;
>>         mutex_unlock(&cap->rkisp1->stream_lock);
>>         return 0;
>>   -err_stop_stream:
>> -    rkisp1_stream_stop(cap);
>> +err_v4l2_pm_put:
>>       v4l2_pipeline_pm_put(entity);
>>   err_pipe_pm_put:
>>       pm_runtime_put(cap->rkisp1->dev);
>>
> 

Reply via email to