The ABI files are supposed to be unique. Yet,
in the specific case of hw_pattern, there are some duplicated
entries as warned by scripts/get_abi.pl:
Warning: /sys/class/leds/<led>/hw_pattern is defined 3 times:
Documentation/ABI/testing/sysfs-class-led-trigger-pattern:14
Documentation/ABI/testing/sysfs-class-led-driver-sc27xx:0
Documentation/ABI/testing/sysfs-class-led-driver-el15203000:0
Drop the duplication from the ABI files, moving the specific
definitions to files inside Documentation/leds.
Signed-off-by: Mauro Carvalho Chehab <mchehab+hua...@kernel.org>
---
.../testing/sysfs-class-led-driver-el15203000 | 135 -----------------
.../ABI/testing/sysfs-class-led-driver-sc27xx | 22 ---
.../testing/sysfs-class-led-trigger-pattern | 4 +-
Documentation/leds/index.rst | 1 +
Documentation/leds/leds-el15203000.rst | 140 ++++++++++++++++++
Documentation/leds/leds-sc27xx.rst | 27 ++++
6 files changed, 170 insertions(+), 159 deletions(-)
delete mode 100644 Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
create mode 100644 Documentation/leds/leds-el15203000.rst
create mode 100644 Documentation/leds/leds-sc27xx.rst
diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
index da546e86deb5..04f3ffdc5936 100644
--- a/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
+++ b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
@@ -1,138 +1,3 @@
-What: /sys/class/leds/<led>/hw_pattern
-Date: September 2019
-KernelVersion: 5.5
-Description:
- Specify a hardware pattern for the EL15203000 LED.
- The LEDs board supports only predefined patterns by firmware
- for specific LEDs.
-
- Breathing mode for Screen frame light tube::
-
- "0 4000 1 4000"
-
- ^
- |
- Max-| ---
- | / \
- | / \
- | / \ /
- | / \ /
- Min-|- ---
- |
- 0------4------8--> time (sec)
-
- Cascade mode for Pipe LED::
-
- "1 800 2 800 4 800 8 800 16 800"
-
- ^
- |
- 0 On -|----+ +----+ +---
- | | | | |
- Off-| +-------------------+ +-------------------+
- |
- 1 On -| +----+ +----+
- | | | | |
- Off |----+ +-------------------+ +------------------
- |
- 2 On -| +----+ +----+
- | | | | |
- Off-|---------+ +-------------------+ +-------------
- |
- 3 On -| +----+ +----+
- | | | | |
- Off-|--------------+ +-------------------+ +--------
- |
- 4 On -| +----+ +----+
- | | | | |
- Off-|-------------------+ +-------------------+ +---
- |
- 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8-->
time (sec)
-
- Inverted cascade mode for Pipe LED::
-
- "30 800 29 800 27 800 23 800 15 800"
-
- ^
- |
- 0 On -| +-------------------+ +-------------------+
- | | | | |
- Off-|----+ +----+ +---
- |
- 1 On -|----+ +-------------------+ +------------------
- | | | | |
- Off | +----+ +----+
- |
- 2 On -|---------+ +-------------------+ +-------------
- | | | | |
- Off-| +----+ +----+
- |
- 3 On -|--------------+ +-------------------+ +--------
- | | | | |
- Off-| +----+ +----+
- |
- 4 On -|-------------------+ +-------------------+ +---
- | | | | |
- Off-| +----+ +----+
- |
- 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8-->
time (sec)
-
- Bounce mode for Pipe LED::
-
- "1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1
800"
-
- ^
- |
- 0 On -|----+ +--------
- | | |
- Off-| +---------------------------------------+
- |
- 1 On -| +----+ +----+
- | | | | |
- Off |----+ +-----------------------------+ +--------
- |
- 2 On -| +----+ +----+
- | | | | |
- Off-|---------+ +-------------------+ +-------------
- |
- 3 On -| +----+ +----+
- | | | | |
- Off-|--------------+ +---------+ +------------------
- |
- 4 On -| +---------+
- | | |
- Off-|-------------------+ +-----------------------
- |
- 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8-->
time (sec)
-
- Inverted bounce mode for Pipe LED::
-
- "30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29
800 30 800"
-
- ^
- |
- 0 On -| +---------------------------------------+
- | | |
- Off-|----+ +--------
- |
- 1 On -|----+ +-----------------------------+ +--------
- | | | | |
- Off | +----+ +----+
- |
- 2 On -|---------+ +-------------------+ +-------------
- | | | | |
- Off-| +----+ +----+
- |
- 3 On -|--------------+ +---------+ +------------------
- | | | | |
- Off-| +----+ +----+
- |
- 4 On -|-------------------+ +-----------------------
- | | |
- Off-| +---------+
- |
- 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8-->
time (sec)
-
What: /sys/class/leds/<led>/repeat
Date: September 2019
KernelVersion: 5.5
diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
deleted file mode 100644
index 215482379580..000000000000
--- a/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
+++ /dev/null
@@ -1,22 +0,0 @@
-What: /sys/class/leds/<led>/hw_pattern
-Date: September 2018
-KernelVersion: 4.20
-Description:
- Specify a hardware pattern for the SC27XX LED. For the SC27XX
- LED controller, it only supports 4 stages to make a single
- hardware pattern, which is used to configure the rise time,
- high time, fall time and low time for the breathing mode.
-
- For the breathing mode, the SC27XX LED only expects one
brightness
- for the high stage. To be compatible with the hardware pattern
- format, we should set brightness as 0 for rise stage, fall
- stage and low stage.
-
- - Min stage duration: 125 ms
- - Max stage duration: 31875 ms
-
- Since the stage duration step is 125 ms, the duration should be
- a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ...
31875ms.
-
- Thus the format of the hardware pattern values should be:
- "0 rise_duration brightness high_duration 0 fall_duration 0
low_duration".
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
index bd92ef9d6faa..d91a07767adf 100644
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
@@ -23,8 +23,8 @@ Description:
Since different LED hardware can have different semantics of
hardware patterns, each driver is expected to provide its own
- description for the hardware patterns in their ABI documentation
- file.
+ description for the hardware patterns in their documentation
+ file at Documentation/leds/.
What: /sys/class/leds/<led>/repeat
Date: September 2018
diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
index bc70c6aa7138..53e6090454af 100644
--- a/Documentation/leds/index.rst
+++ b/Documentation/leds/index.rst
@@ -17,6 +17,7 @@ LEDs
uleds
leds-blinkm
+ leds-el15203000
leds-lm3556
leds-lp3944
leds-lp5521
diff --git a/Documentation/leds/leds-el15203000.rst
b/Documentation/leds/leds-el15203000.rst
new file mode 100644
index 000000000000..12c23d79724d
--- /dev/null
+++ b/Documentation/leds/leds-el15203000.rst
@@ -0,0 +1,140 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+Kernel driver for Crane EL15203000
+==================================
+
+/sys/class/leds/<led>/hw_pattern
+--------------------------------
+
+Specify a hardware pattern for the EL15203000 LED.
+
+The LEDs board supports only predefined patterns by firmware
+for specific LEDs.
+
+Breathing mode for Screen frame light tube::
+
+ "0 4000 1 4000"
+
+ ^
+ |
+ Max-| ---
+ | / \
+ | / \
+ | / \ /
+ | / \ /
+ Min-|- ---
+ |
+ 0------4------8--> time (sec)
+
+Cascade mode for Pipe LED::
+
+ "1 800 2 800 4 800 8 800 16 800"
+
+ ^
+ |
+ 0 On -|----+ +----+ +---
+ | | | | |
+ Off-| +-------------------+ +-------------------+
+ |
+ 1 On -| +----+ +----+
+ | | | | |
+ Off |----+ +-------------------+ +------------------
+ |
+ 2 On -| +----+ +----+
+ | | | | |
+ Off-|---------+ +-------------------+ +-------------
+ |
+ 3 On -| +----+ +----+
+ | | | | |
+ Off-|--------------+ +-------------------+ +--------
+ |
+ 4 On -| +----+ +----+
+ | | | | |
+ Off-|-------------------+ +-------------------+ +---
+ |
+ 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
+
+Inverted cascade mode for Pipe LED::
+
+ "30 800 29 800 27 800 23 800 15 800"
+
+ ^
+ |
+ 0 On -| +-------------------+ +-------------------+
+ | | | | |
+ Off-|----+ +----+ +---
+ |
+ 1 On -|----+ +-------------------+ +------------------
+ | | | | |
+ Off | +----+ +----+
+ |
+ 2 On -|---------+ +-------------------+ +-------------
+ | | | | |
+ Off-| +----+ +----+
+ |
+ 3 On -|--------------+ +-------------------+ +--------
+ | | | | |
+ Off-| +----+ +----+
+ |
+ 4 On -|-------------------+ +-------------------+ +---
+ | | | | |
+ Off-| +----+ +----+
+ |
+ 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
+
+Bounce mode for Pipe LED::
+
+ "1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1 800"
+
+ ^
+ |
+ 0 On -|----+ +--------
+ | | |
+ Off-| +---------------------------------------+
+ |
+ 1 On -| +----+ +----+
+ | | | | |
+ Off |----+ +-----------------------------+ +--------
+ |
+ 2 On -| +----+ +----+
+ | | | | |
+ Off-|---------+ +-------------------+ +-------------
+ |
+ 3 On -| +----+ +----+
+ | | | | |
+ Off-|--------------+ +---------+ +------------------
+ |
+ 4 On -| +---------+
+ | | |
+ Off-|-------------------+ +-----------------------
+ |
+ 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
+
+Inverted bounce mode for Pipe LED::
+
+ "30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29 800 30 800"
+
+ ^
+ |
+ 0 On -| +---------------------------------------+
+ | | |
+ Off-|----+ +--------
+ |
+ 1 On -|----+ +-----------------------------+ +--------
+ | | | | |
+ Off | +----+ +----+
+ |
+ 2 On -|---------+ +-------------------+ +-------------
+ | | | | |
+ Off-| +----+ +----+
+ |
+ 3 On -|--------------+ +---------+ +------------------
+ | | | | |
+ Off-| +----+ +----+
+ |
+ 4 On -|-------------------+ +-----------------------
+ | | |
+ Off-| +---------+
+ |
+ 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
diff --git a/Documentation/leds/leds-sc27xx.rst
b/Documentation/leds/leds-sc27xx.rst
new file mode 100644
index 000000000000..6bdf6ba3c9fd
--- /dev/null
+++ b/Documentation/leds/leds-sc27xx.rst
@@ -0,0 +1,27 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+Kernel driver for Spreadtrum SC27XX
+===================================
+
+/sys/class/leds/<led>/hw_pattern
+--------------------------------
+
+Specify a hardware pattern for the SC27XX LED. For the SC27XX
+LED controller, it only supports 4 stages to make a single
+hardware pattern, which is used to configure the rise time,
+high time, fall time and low time for the breathing mode.
+
+For the breathing mode, the SC27XX LED only expects one brightness
+for the high stage. To be compatible with the hardware pattern
+format, we should set brightness as 0 for rise stage, fall
+stage and low stage.
+
+- Min stage duration: 125 ms
+- Max stage duration: 31875 ms
+
+Since the stage duration step is 125 ms, the duration should be
+a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... 31875ms.
+
+Thus the format of the hardware pattern values should be:
+"0 rise_duration brightness high_duration 0 fall_duration 0 low_duration".
--
2.26.2
