From: Ioana Ciornei <[email protected]> Annotate the EMDIO1 node and describe the 4 10GBASER PHYs found on the LS2088ARDB board. Also, add phy-handles for DPMACs 1-4 to their associated PHY.
Signed-off-by: Ioana Ciornei <[email protected]> --- Changes in v2: - none Changes in v3: - none Changes in v4: - move the phy-connection-type attribute to the ethernet node Changes in v5: - renamed all PHY nodes to ethernet-phy@X and their unit address to be the reg value .../boot/dts/freescale/fsl-ls2088a-rdb.dts | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index f6b4d75a258b..a4b0dcab6e8e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -22,3 +22,47 @@ chosen { stdout-path = "serial1:115200n8"; }; }; + +&dpmac1 { + phy-handle = <&mdio1_phy1>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac2 { + phy-handle = <&mdio1_phy2>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac3 { + phy-handle = <&mdio1_phy3>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac4 { + phy-handle = <&mdio1_phy4>; + phy-connection-type = "10gbase-r"; +}; + +&emdio1 { + status = "okay"; + + mdio1_phy1: ethernet-phy@10 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x10>; + }; + + mdio1_phy2: ethernet-phy@11 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x11>; + }; + + mdio1_phy3: ethernet-phy@12 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x12>; + }; + + mdio1_phy4: ethernet-phy@13 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x13>; + }; +}; -- 2.28.0
