Since commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework user
input parsing bits"), ECC are broken in FMC2 driver in case of
nand-ecc-step-size and nand-ecc-strength are not set in the device tree.
To avoid this issue, the default settings are now set in
stm32_fmc2_nfc_attach_chip function.
Signed-off-by: Christophe Kerello <christophe.kere...@st.com>
Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing
bits")
---
Changes in v2:
- move default ECC settings in stm32_fmc2_nfc_attach_chip function.
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index b31a581..550bda4 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1708,6 +1708,13 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip
*chip)
return -EINVAL;
}
+ /* Default ECC settings in case they are not set in the device tree */
+ if (!chip->ecc.size)
+ chip->ecc.size = FMC2_ECC_STEP_SIZE;
+
+ if (!chip->ecc.strength)
+ chip->ecc.strength = FMC2_ECC_BCH8;
+
ret = nand_ecc_choose_conf(chip, &stm32_fmc2_nfc_ecc_caps,
mtd->oobsize - FMC2_BBM_LEN);
if (ret) {
@@ -1727,8 +1734,7 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip
*chip)
mtd_set_ooblayout(mtd, &stm32_fmc2_nfc_ooblayout_ops);
- if (chip->options & NAND_BUSWIDTH_16)
- stm32_fmc2_nfc_set_buswidth_16(nfc, true);
+ stm32_fmc2_nfc_setup(chip);
return 0;
}
@@ -1952,11 +1958,6 @@ static int stm32_fmc2_nfc_probe(struct platform_device
*pdev)
chip->options |= NAND_BUSWIDTH_AUTO | NAND_NO_SUBPAGE_WRITE |
NAND_USES_DMA;
- /* Default ECC settings */
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
- chip->ecc.size = FMC2_ECC_STEP_SIZE;
- chip->ecc.strength = FMC2_ECC_BCH8;
-
/* Scan to find existence of the device */
ret = nand_scan(chip, nand->ncs);
if (ret)
--
1.9.1
