Rob Herring <[email protected]> 於 2020年11月3日 週二 上午9:58寫道：
>
> On Mon, Nov 2, 2020 at 7:14 PM ChiYuan Huang <[email protected]> wrote:
> >
> > Rob Herring <[email protected]> 於 2020年11月3日 週二 上午1:21寫道：
> > >
> > > On Mon, 02 Nov 2020 11:13:23 +0800, cy_huang wrote:
> > > > From: ChiYuan Huang <[email protected]>
> > > >
> > > > Adds DT binding document for Richtek RT4831 MFD core.
> > > >
> > > > Signed-off-by: ChiYuan Huang <[email protected]>
> > > > ---
> > > > .../devicetree/bindings/mfd/richtek,rt4831.yaml | 89
> > > > ++++++++++++++++++++++
> > > > include/dt-bindings/leds/rt4831-backlight.h | 23 ++++++
> > > > 2 files changed, 112 insertions(+)
> > > > create mode 100644
> > > > Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml
> > > > create mode 100644 include/dt-bindings/leds/rt4831-backlight.h
> > > >
> > >
> > >
> > > My bot found errors running 'make dt_binding_check' on your patch:
> > >
> > > yamllint warnings/errors:
> > >
> > > dtschema/dtc warnings/errors:
> > > Unknown file referenced: [Errno 2] No such file or directory:
> > > '/usr/local/lib/python3.8/dist-packages/dtschema/schemas/regulator/richtek,rt4831-regulator.yaml'
> > > xargs: dt-doc-validate: exited with status 255; aborting
> > > make[1]: *** [Documentation/devicetree/bindings/Makefile:59:
> > > Documentation/devicetree/bindings/processed-schema-examples.json] Error
> > > 124
> > > make: *** [Makefile:1364: dt_binding_check] Error 2
> > >
> > >
> > > See https://patchwork.ozlabs.org/patch/1391911
> > >
> > > The base for the patch is generally the last rc1. Any dependencies
> > > should be noted.
> > >
> > > If you already ran 'make dt_binding_check' and didn't see the above
> > > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > > date:
> > >
> > > pip3 install dtschema --upgrade
> > >
> > > Please check and re-submit.
> > >
> > Sorry, I have one question.
> > If the richtek,rt4831.yaml is depend upon the other yaml, do I need to
> > merge it all into one patch?
> > Currently, my submitting order is mfd, backlight, and regulator.
> > Each part divided into two patches (one for source code, another for
> > dt_binding_document)
>
> Doesn't have to be 1 patch, but should be one series with MFD coming
> last as it references the others. Example goes in the MFD binding. I
> need to see a complete picture for what the device is to effectively
> review the binding.
>
Got it. Next, I'll add the regulator and backlight dt-binding into the
series patch.
And add the description into mfd core dt-binding like as below.
This patch depends on
"backlight: rt4831: Adds DT binding document for Richtek RT4831
backlight module".
"regulator: rt4831: Adds DT binding document for Richtek RT4831 DSV module".
> Rob
