The new usb_control_msg_recv() and usb_control_msg_send() nicely wraps
usb_control_msg() with proper error check. Hence use the wrappers
instead of calling usb_control_msg() directly.
Signed-off-by: Himadri Pandya <himadrispan...@gmail.com>
---
drivers/usb/serial/ftdi_sio.c | 182 +++++++++++++++-------------------
1 file changed, 78 insertions(+), 104 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e0f4c3d9649c..37e9e75b90d0 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1245,13 +1245,12 @@ static int update_mctrl(struct usb_serial_port *port,
unsigned int set,
value |= FTDI_SIO_SET_DTR_HIGH;
if (set & TIOCM_RTS)
value |= FTDI_SIO_SET_RTS_HIGH;
- rv = usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- FTDI_SIO_SET_MODEM_CTRL_REQUEST,
- FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
- value, priv->interface,
- NULL, 0, WDR_TIMEOUT);
- if (rv < 0) {
+ rv = usb_control_msg_send(port->serial->dev, 0,
+ FTDI_SIO_SET_MODEM_CTRL_REQUEST,
+ FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
+ value, priv->interface,
+ NULL, 0, WDR_TIMEOUT, GFP_KERNEL);
+ if (rv) {
dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n",
__func__,
(set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ?
"LOW" : "unchanged",
@@ -1393,12 +1392,11 @@ static int change_speed(struct tty_struct *tty, struct
usb_serial_port *port)
index = (u16)((index << 8) | priv->interface);
}
- rv = usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- FTDI_SIO_SET_BAUDRATE_REQUEST,
- FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
- value, index,
- NULL, 0, WDR_SHORT_TIMEOUT);
+ rv = usb_control_msg_send(port->serial->dev, 0,
+ FTDI_SIO_SET_BAUDRATE_REQUEST,
+ FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
+ value, index,
+ NULL, 0, WDR_SHORT_TIMEOUT, GFP_KERNEL);
return rv;
}
@@ -1417,13 +1415,12 @@ static int write_latency_timer(struct usb_serial_port
*port)
dev_dbg(&port->dev, "%s: setting latency timer = %i\n", __func__, l);
- rv = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
- l, priv->interface,
- NULL, 0, WDR_TIMEOUT);
- if (rv < 0)
+ rv = usb_control_msg_send(udev, 0,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+ l, priv->interface,
+ NULL, 0, WDR_TIMEOUT, GFP_KERNEL);
+ if (rv)
dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
return rv;
}
@@ -1432,27 +1429,16 @@ static int _read_latency_timer(struct usb_serial_port
*port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
- unsigned char *buf;
+ u8 buf;
int rv;
- buf = kmalloc(1, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- rv = usb_control_msg(udev,
- usb_rcvctrlpipe(udev, 0),
- FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
- 0, priv->interface,
- buf, 1, WDR_TIMEOUT);
- if (rv < 1) {
- if (rv >= 0)
- rv = -EIO;
- } else {
- rv = buf[0];
- }
-
- kfree(buf);
+ rv = usb_control_msg_recv(udev, 0,
+ FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
+ 0, priv->interface,
+ &buf, 1, WDR_TIMEOUT, GFP_KERNEL);
+ if (rv == 0)
+ rv = buf;
return rv;
}
@@ -1731,13 +1717,12 @@ static ssize_t event_char_store(struct device *dev,
dev_dbg(&port->dev, "%s: setting event char = 0x%03x\n", __func__, v);
- rv = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- FTDI_SIO_SET_EVENT_CHAR_REQUEST,
- FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
- v, priv->interface,
- NULL, 0, WDR_TIMEOUT);
- if (rv < 0) {
+ rv = usb_control_msg_send(udev, 0,
+ FTDI_SIO_SET_EVENT_CHAR_REQUEST,
+ FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
+ v, priv->interface,
+ NULL, 0, WDR_TIMEOUT, GFP_KERNEL);
+ if (rv) {
dev_dbg(&port->dev, "Unable to write event character: %i\n",
rv);
return -EIO;
}
@@ -1805,12 +1790,12 @@ static int ftdi_set_bitmode(struct usb_serial_port
*port, u8 mode)
return result;
val = (mode << 8) | (priv->gpio_output << 4) | priv->gpio_value;
- result = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- FTDI_SIO_SET_BITMODE_REQUEST,
- FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val,
- priv->interface, NULL, 0, WDR_TIMEOUT);
- if (result < 0) {
+ result = usb_control_msg_send(serial->dev, 0,
+ FTDI_SIO_SET_BITMODE_REQUEST,
+ FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val,
+ priv->interface, NULL, 0, WDR_TIMEOUT,
+ GFP_KERNEL);
+ if (result) {
dev_err(&serial->interface->dev,
"bitmode request failed for value 0x%04x: %d\n",
val, result);
@@ -1866,32 +1851,21 @@ static int ftdi_read_cbus_pins(struct usb_serial_port
*port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
- unsigned char *buf;
+ u8 buf;
int result;
result = usb_autopm_get_interface(serial->interface);
if (result)
return result;
- buf = kmalloc(1, GFP_KERNEL);
- if (!buf) {
- usb_autopm_put_interface(serial->interface);
- return -ENOMEM;
- }
-
- result = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- FTDI_SIO_READ_PINS_REQUEST,
- FTDI_SIO_READ_PINS_REQUEST_TYPE, 0,
- priv->interface, buf, 1, WDR_TIMEOUT);
- if (result < 1) {
- if (result >= 0)
- result = -EIO;
- } else {
- result = buf[0];
- }
+ result = usb_control_msg_recv(serial->dev, 0,
+ FTDI_SIO_READ_PINS_REQUEST,
+ FTDI_SIO_READ_PINS_REQUEST_TYPE, 0,
+ priv->interface, &buf, 1, WDR_TIMEOUT,
+ GFP_KERNEL);
+ if (result == 0)
+ result = buf;
- kfree(buf);
usb_autopm_put_interface(serial->interface);
return result;
@@ -2311,6 +2285,7 @@ static int ftdi_NDI_device_setup(struct usb_serial
*serial)
{
struct usb_device *udev = serial->dev;
int latency = ndi_latency_timer;
+ int ret;
if (latency == 0)
latency = 1;
@@ -2320,12 +2295,12 @@ static int ftdi_NDI_device_setup(struct usb_serial
*serial)
dev_dbg(&udev->dev, "%s setting NDI device latency to %d\n", __func__,
latency);
dev_info(&udev->dev, "NDI device with a latency value of %d\n",
latency);
- /* FIXME: errors are not returned */
- usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
- latency, 0, NULL, 0, WDR_TIMEOUT);
- return 0;
+ ret = usb_control_msg_send(udev, 0,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+ latency, 0, NULL, 0, WDR_TIMEOUT,
+ GFP_KERNEL);
+ return ret;
}
/*
@@ -2424,12 +2399,11 @@ static void ftdi_dtr_rts(struct usb_serial_port *port,
int on)
/* Disable flow control */
if (!on) {
- if (usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- FTDI_SIO_SET_FLOW_CTRL_REQUEST,
- FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0, priv->interface, NULL, 0,
- WDR_TIMEOUT) < 0) {
+ if (usb_control_msg_send(port->serial->dev, 0,
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+ 0, priv->interface, NULL, 0,
+ WDR_TIMEOUT, GFP_KERNEL)) {
dev_err(&port->dev, "error from flowcontrol urb\n");
}
}
@@ -2617,12 +2591,11 @@ static void ftdi_break_ctl(struct tty_struct *tty, int
break_state)
else
value = priv->last_set_data_value;
- if (usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- FTDI_SIO_SET_DATA_REQUEST,
- FTDI_SIO_SET_DATA_REQUEST_TYPE,
- value , priv->interface,
- NULL, 0, WDR_TIMEOUT) < 0) {
+ if (usb_control_msg_send(port->serial->dev, 0,
+ FTDI_SIO_SET_DATA_REQUEST,
+ FTDI_SIO_SET_DATA_REQUEST_TYPE,
+ value, priv->interface,
+ NULL, 0, WDR_TIMEOUT, GFP_KERNEL)) {
dev_err(&port->dev, "%s FAILED to enable/disable break state
(state was %d)\n",
__func__, break_state);
}
@@ -2754,11 +2727,11 @@ static void ftdi_set_termios(struct tty_struct *tty,
- but is or'ed with this value */
priv->last_set_data_value = value;
- if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- FTDI_SIO_SET_DATA_REQUEST,
- FTDI_SIO_SET_DATA_REQUEST_TYPE,
- value , priv->interface,
- NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
+ if (usb_control_msg_send(dev, 0,
+ FTDI_SIO_SET_DATA_REQUEST,
+ FTDI_SIO_SET_DATA_REQUEST_TYPE,
+ value, priv->interface,
+ NULL, 0, WDR_SHORT_TIMEOUT, GFP_KERNEL)) {
dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n",
__func__);
}
@@ -2767,11 +2740,11 @@ static void ftdi_set_termios(struct tty_struct *tty,
no_data_parity_stop_changes:
if ((cflag & CBAUD) == B0) {
/* Disable flow control */
- if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- FTDI_SIO_SET_FLOW_CTRL_REQUEST,
- FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0, priv->interface,
- NULL, 0, WDR_TIMEOUT) < 0) {
+ if (usb_control_msg_send(dev, 0,
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+ 0, priv->interface,
+ NULL, 0, WDR_TIMEOUT, GFP_KERNEL)) {
dev_err(ddev, "%s error from disable flowcontrol urb\n",
__func__);
}
@@ -2806,11 +2779,12 @@ static void ftdi_set_termios(struct tty_struct *tty,
index |= priv->interface;
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- FTDI_SIO_SET_FLOW_CTRL_REQUEST,
- FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- value, index, NULL, 0, WDR_TIMEOUT);
- if (ret < 0)
+ ret = usb_control_msg_send(dev, 0,
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+ value, index, NULL, 0, WDR_TIMEOUT,
+ GFP_KERNEL);
+ if (ret)
dev_err(&port->dev, "failed to set flow control: %d\n", ret);
}
--
2.17.1
