[PATCH v2 1/2] ARM: dts: BCM5301X: pinctrl - use correct driver and define mdio pins

[Vivek Unune]

BCM47094 version of pinmux uses different driver and supports mdio
pinmux pins. Hence, use the correct driver and define the pins.

Signed-off-by: Vivek Unune <npcomplet...@gmail.com>
---
---
 arch/arm/boot/dts/bcm47094.dtsi | 9 +++++++++
 arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index cdc5ff593adb..747ca030435f 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -8,6 +8,15 @@
 / {
 };
 
+&pinctrl {
+       compatible = "brcm,bcm4709-pinmux";
+
+       pinmux_mdio: mdio {
+               groups = "mdio_grp";
+               function = "mdio";
+       };
+};
+
 &usb3_phy {
        compatible = "brcm,ns-bx-usb3-phy";
 };
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 3e55ff4fb550..cfc08cdd590f 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -428,7 +428,7 @@ cru@100 {
                        #address-cells = <1>;
                        #size-cells = <1>;
 
-                       pin-controller@1c0 {
+                       pinctrl: pin-controller@1c0 {
                                compatible = "brcm,bcm4708-pinmux";
                                reg = <0x1c0 0x24>;
                                reg-names = "cru_gpio_control";
-- 
2.25.1