Hi Sylwester, On 11/4/20 7:36 PM, Sylwester Nawrocki wrote: > This patchset adds interconnect API support for the Exynos SoC "samsung, > exynos-bus" compatible devices, which already have their corresponding > exynos-bus driver in the devfreq subsystem. Complementing the devfreq > driver with an interconnect functionality allows to ensure the QoS > requirements of devices accessing the system memory (e.g. video processing > devices) are fulfilled and aallows to avoid issues like the one discussed > in thread [1]. > > This patch series adds implementation of the interconnect provider per each > "samsung,exynos-bus" compatible DT node, with one interconnect node per > provider. The interconnect code which was previously added as a part of > the devfreq driver has been converted to a separate platform driver. > In the devfreq a corresponding virtual child platform device is registered. > Integration of devfreq and interconnect frameworks is achieved through > the PM QoS API. > > A sample interconnect consumer for exynos-mixer is added in patches 6/7, > 7/7, it is currently added only for exynos4412 and allows to address the > mixer DMA underrun error issues [1]. > > Changes since v7: > - drivers/interconnect/exynos renamed to drivers/interconnect/samsung, > - added INTERCONNECT_SAMSUNG Kconfig symbol, > - added missing driver sync_state callback, > - improved the DT binding description, > - added a patch adding maintainers entry, > - updated comment in patch 7/7, typo fix (patch 1/7). > > The series has been tested on Odroid U3 board. It is based on v5.10-rc1. > > -- > Regards, > Sylwester > > Changes since v6: > - the interconnect consumer DT bindings are now used to describe dependencies > of the interconnects (samsung,exynos-bus nodes), > - bus-width property replaced with samsung,data-clk-ratio, > - adaptation to recent changes in the interconnect code > (of_icc_get_from_provider(), icc_node_add()). > > Changes since v5: > - addition of "bus-width: DT property, which specifies data width > of the interconnect bus (patches 1...2/6), > - addition of synchronization of the interconnect bandwidth setting > with VSYNC (patch 6/6). > > Changes since v3 [4] (v4 skipped to align with patchset [1]), detailed > changes are listed in patches: > - conversion to a separate interconnect (platform) driver, > - an update of the DT binding documenting new optional properties: > #interconnect-cells, samsung,interconnect-parent in "samsung,exynos-bus" > nodes, > - new DT properties added to the SoC, rather than to the board specific > files. > > Changes since v2 [5]: > - Use icc_std_aggregate(). > - Implement a different modification of apply_constraints() in > drivers/interconnect/core.c (patch 03). > - Use 'exynos,interconnect-parent-node' in the DT instead of > 'devfreq'/'parent', depending on the bus. > - Rebase on DT patches that deprecate the 'devfreq' DT property. > - Improve error handling, including freeing generated IDs on failure. > - Remove exynos_bus_icc_connect() and add exynos_bus_icc_get_parent(). > > Changes since v1 [6]: > - Rebase on coupled regulators patches. > - Use dev_pm_qos_*() API instead of overriding frequency in > exynos_bus_target(). > - Use IDR for node ID allocation. > - Reverse order of multiplication and division in > mixer_set_memory_bandwidth() (patch 07) to avoid integer overflow. > > > References: > [1] https://patchwork.kernel.org/patch/10861757/ (original issue) > [2] https://www.spinics.net/lists/linux-samsung-soc/msg70014.html > [3] https://www.spinics.net/lists/arm-kernel/msg810722.html > [4] > https://lore.kernel.org/linux-pm/20191220115653.6487-1-a.swi...@samsung.com > [5] https://patchwork.kernel.org/cover/11054417/ (v1 of this RFC) > [6] https://patchwork.kernel.org/cover/11152595/ (v2 of this RFC) > > > Artur Świgoń (1): > ARM: dts: exynos: Add interconnects to Exynos4412 mixer > > Sylwester Nawrocki (6): > dt-bindings: devfreq: Add documentation for the interconnect > properties > interconnect: Add generic interconnect driver for Exynos SoCs > MAINTAINERS: Add entry for Samsung interconnect drivers > PM / devfreq: exynos-bus: Add registration of interconnect child > device > ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes > drm: exynos: mixer: Add interconnect support > > .../devicetree/bindings/devfreq/exynos-bus.txt | 71 +++++++- > MAINTAINERS | 7 + > arch/arm/boot/dts/exynos4412.dtsi | 7 + > drivers/devfreq/exynos-bus.c | 17 ++ > drivers/gpu/drm/exynos/exynos_mixer.c | 146 ++++++++++++++- > drivers/interconnect/Kconfig | 1 + > drivers/interconnect/Makefile | 1 + > drivers/interconnect/samsung/Kconfig | 13 ++ > drivers/interconnect/samsung/Makefile | 4 + > drivers/interconnect/samsung/exynos.c | 199 > +++++++++++++++++++++ > 10 files changed, 456 insertions(+), 10 deletions(-) > create mode 100644 drivers/interconnect/samsung/Kconfig > create mode 100644 drivers/interconnect/samsung/Makefile > create mode 100644 drivers/interconnect/samsung/exynos.c >
I tested it. It is well working. Thanks. Tested-by: Chanwoo Choi <cw00.c...@samsung.com> -- Best Regards, Chanwoo Choi Samsung Electronics
