[PATCH] arm64: dts: allwinner: pinephone: Use generic sensor node names

[Samuel Holland]

Instead of duplicating part of the compatible string in the node name,
use generic names as recommended by (and listed in) section 2.2.2 of the
Devicetree Specification.

Suggested-by: Maxime Ripard <max...@cerno.tech>
Signed-off-by: Samuel Holland <sam...@sholland.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi 
b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 2da69450eec1..2dfe9bae8c67 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -161,7 +161,7 @@ &i2c1 {
        status = "okay";
 
        /* Magnetometer */
-       lis3mdl: lis3mdl@1e {
+       lis3mdl: magnetometer@1e {
                compatible = "st,lis3mdl-magn";
                reg = <0x1e>;
                vdd-supply = <&reg_dldo1>;
@@ -169,7 +169,7 @@ lis3mdl: lis3mdl@1e {
        };
 
        /* Light/proximity sensor */
-       stk3311@48 {
+       light-sensor@48 {
                compatible = "sensortek,stk3311";
                reg = <0x48>;
                interrupt-parent = <&pio>;
@@ -179,7 +179,7 @@ stk3311@48 {
        };
 
        /* Accelerometer/gyroscope */
-       mpu6050@68 {
+       accelerometer@68 {
                compatible = "invensense,mpu6050";
                reg = <0x68>;
                interrupt-parent = <&pio>;
-- 
2.26.2