Hi,

On Mon, Nov 9, 2020 at 5:01 PM Douglas Anderson <diand...@chromium.org> wrote:
>
> Add support for the BOE NV110WTM-N61 panel.  The EDID lists two modes
> (one for 60 Hz refresh rate and one for 40 Hz), so we'll list both of
> them here.
>
> Note that the panel datasheet requires 80 ms between HPD asserting and
> the backlight power being turned on.  We'll use the new timing
> constraints structure to do this cleanly.  This assumes that the
> backlight will be enabled _after_ the panel enable finishes.  This is
> how it works today and seems a sane assumption.
>
> Signed-off-by: Douglas Anderson <diand...@chromium.org>
> ---
>
> Changes in v4:
> - Rebased atop changes in earlier patches.
>
> Changes in v2:
> - Adjust for shorter names in patch #1.
>
>  drivers/gpu/drm/panel/panel-simple.c | 46 ++++++++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c 
> b/drivers/gpu/drm/panel/panel-simple.c
> index a54f42cb3adc..9bb723696e94 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1396,6 +1396,49 @@ static const struct panel_desc boe_nv101wxmn51 = {
>         },
>  };
>
> +static const struct drm_display_mode boe_nv110wtm_n61_modes[] = {
> +       {
> +               .clock = 207800,
> +               .hdisplay = 2160,
> +               .hsync_start = 2160 + 48,
> +               .hsync_end = 2160 + 48 + 32,
> +               .htotal = 2160 + 48 + 32 + 100,
> +               .vdisplay = 1440,
> +               .vsync_start = 1440 + 3,
> +               .vsync_end = 1440 + 3 + 6,
> +               .vtotal = 1440 + 3 + 6 + 31,
> +       },
> +       {
> +               .clock = 138500,
> +               .hdisplay = 2160,
> +               .hsync_start = 2160 + 48,
> +               .hsync_end = 2160 + 48 + 32,
> +               .htotal = 2160 + 48 + 32 + 100,
> +               .vdisplay = 1440,
> +               .vsync_start = 1440 + 3,
> +               .vsync_end = 1440 + 3 + 6,
> +               .vtotal = 1440 + 3 + 6 + 31,
> +       },

I can do it as a follow-up patch if there is no other reason to spin,
but I realized that I forgot to add:

.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,

...to both the 40 and 60 Hz modes to make it match what's in the EDID.
I'm also OK w/ it getting added by a maintainer when this lands if
that makes sense.

-Doug

Reply via email to