Hi All, Not sure if this is a XHCI driver problem at all, but I needed to start somewhere with reporting this so I went with:
scripts/get_maintainer.pl -f drivers/usb/host/xhci-pci.c And added a Cc: linux-...@vger.kernel.org as bonus. I'm seeing the following errors and very slow network performance with the USB NIC in a Lenovo Thunderbolt gen 2 dock. Note that the USB NIC is connected to the XHCI controller which is embedded inside the dock and is connected over thunderbolt! So the errors are: [ 1148.744205] swiotlb_tbl_map_single: 6 callbacks suppressed [ 1148.744210] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots) [ 1148.744218] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 16ea@1411c0000 dir 1 --- failed [ 1148.744226] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11 [ 1148.744368] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots) [ 1148.744375] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 16ea@10aabc000 dir 1 --- failed [ 1148.744381] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11 [ 1148.745141] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots) [ 1148.745148] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 118e@1411c0000 dir 1 --- failed [ 1148.745155] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11 [ 1148.951282] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots) [ 1148.951388] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 118e@140988000 dir 1 --- failed [ 1148.951420] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11 [ 1151.013342] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots) [ 1151.013357] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 1d2a@1411c0000 dir 1 --- failed [ 1151.013373] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11 [ 1151.018660] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 18 (slots) [ 1151.018696] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@1411c0000 dir 1 --- failed [ 1151.018711] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11 [ 1151.223022] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots) [ 1151.223102] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed [ 1151.223133] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11 [ 1151.228810] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots) [ 1151.228870] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed [ 1151.228898] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11 [ 1151.234792] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots) [ 1151.234852] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed [ 1151.234882] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11 etc. This happens as soon as I generate any serious amount of outgoing network traffic. E.g. rsyncing files to another machine. Regards, Hans
