On Fri, Nov 6, 2020 at 12:19 AM Coiby Xu <[email protected]> wrote: > Print the status of debounce filter as follows, > $ cat /sys/kernel/debug/gpio > pin129 interrupt is disabled| interrupt is masked| disable wakeup in > S0i3 state| disable wakeup in S3 state| > disable wakeup in S4/S5 state| input is high| pull-up is disabled| > Pull-down is disabled| output is disabled| debouncing filter disabled| > 0x50000 > > ^^^^^^^^^^^^^^^^^^^^^^^^^^ > pin130 interrupt is disabled| interrupt is masked| disable wakeup in > S0i3 state| disable wakeup in S3 state| > disable wakeup in S4/S5 state| input is high| pull-up is disabled| > Pull-down is disabled| output is disabled| debouncing filter (high) > enabled| debouncing timeout is 124800 (us)| 0x503c8 > > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > Signed-off-by: Coiby Xu <[email protected]>
Patch applied for the next kernel (v5.11). Yours, Linus Walleij
