11.11.2020 13:38, Jon Hunter пишет:
> Commit 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver
> (Tegra30 supported now)") update the Tegra20 CPUFREQ driver to use the
> generic CPUFREQ device-tree driver. Since this change CPUFREQ support
> on the Tegra20 Ventana platform has been broken because the necessary
> device-tree nodes with the operating point information are not populated
> for this platform. Fix this by updating device-tree for Venata to
> include the operating point informration for Tegra20.
>
> Fixes: 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver
> (Tegra30 supported now)")
> Cc: sta...@vger.kernel.org
>
> Signed-off-by: Jon Hunter <jonath...@nvidia.com>
> ---
> arch/arm/boot/dts/tegra20-ventana.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/tegra20-ventana.dts
> b/arch/arm/boot/dts/tegra20-ventana.dts
> index b158771ac0b7..055334ae3d28 100644
> --- a/arch/arm/boot/dts/tegra20-ventana.dts
> +++ b/arch/arm/boot/dts/tegra20-ventana.dts
> @@ -3,6 +3,7 @@
>
> #include <dt-bindings/input/input.h>
> #include "tegra20.dtsi"
> +#include "tegra20-cpu-opp.dtsi"
>
> / {
> model = "NVIDIA Tegra20 Ventana evaluation board";
> @@ -592,6 +593,16 @@ clk32k_in: clock@0 {
> #clock-cells = <0>;
> };
>
> + cpus {
> + cpu0: cpu@0 {
> + operating-points-v2 = <&cpu0_opp_table>;
> + };
> +
> + cpu@1 {
> + operating-points-v2 = <&cpu0_opp_table>;
> + };
> + };
> +
> gpio-keys {
> compatible = "gpio-keys";
>
>
This could be wrong to do because CPU voltage is fixed to 1000mV in
Ventana's DT, are you sure that higher clock rates don't require higher
voltages? What is the CPU process ID and SoC speedo ID on Ventana?
You could easily hook up CPU voltage scaling, please see acer-500 DT and
patch [1] for examples of how to set up regulators in DT. But then it
shouldn't be a stable patch.
[1]
https://patchwork.ozlabs.org/project/linux-tegra/patch/20201104234427.26477-27-dig...@gmail.com/
