From: Sven Van Asbroeck <thesve...@gmail.com>
When running this chip on arm imx6, we intermittently observe
the following kernel warning in the log, especially when the
system is under high load:
[ 50.119484] ------------[ cut here ]------------
[ 50.124377] WARNING: CPU: 0 PID: 303 at kernel/softirq.c:169
__local_bh_enable_ip+0x100/0x184
[ 50.132925] IRQs not enabled as expected
[ 50.159250] CPU: 0 PID: 303 Comm: rngd Not tainted 5.7.8 #1
[ 50.164837] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 50.171395] [<c0111a38>] (unwind_backtrace) from [<c010be28>]
(show_stack+0x10/0x14)
[ 50.179162] [<c010be28>] (show_stack) from [<c05b9dec>]
(dump_stack+0xac/0xd8)
[ 50.186408] [<c05b9dec>] (dump_stack) from [<c0122e40>] (__warn+0xd0/0x10c)
[ 50.193391] [<c0122e40>] (__warn) from [<c0123238>]
(warn_slowpath_fmt+0x98/0xc4)
[ 50.200892] [<c0123238>] (warn_slowpath_fmt) from [<c012b010>]
(__local_bh_enable_ip+0x100/0x184)
[ 50.209860] [<c012b010>] (__local_bh_enable_ip) from [<bf09ecbc>]
(destroy_conntrack+0x48/0xd8 [nf_conntrack])
[ 50.220038] [<bf09ecbc>] (destroy_conntrack [nf_conntrack]) from
[<c0ac9b58>] (nf_conntrack_destroy+0x94/0x168)
[ 50.230160] [<c0ac9b58>] (nf_conntrack_destroy) from [<c0a4aaa0>]
(skb_release_head_state+0xa0/0xd0)
[ 50.239314] [<c0a4aaa0>] (skb_release_head_state) from [<c0a4aadc>]
(skb_release_all+0xc/0x24)
[ 50.247946] [<c0a4aadc>] (skb_release_all) from [<c0a4b4cc>]
(consume_skb+0x74/0x17c)
[ 50.255796] [<c0a4b4cc>] (consume_skb) from [<c081a2dc>]
(lan743x_tx_release_desc+0x120/0x124)
[ 50.264428] [<c081a2dc>] (lan743x_tx_release_desc) from [<c081a98c>]
(lan743x_tx_napi_poll+0x5c/0x18c)
[ 50.273755] [<c081a98c>] (lan743x_tx_napi_poll) from [<c0a6b050>]
(net_rx_action+0x118/0x4a4)
[ 50.282306] [<c0a6b050>] (net_rx_action) from [<c0101364>]
(__do_softirq+0x13c/0x53c)
[ 50.290157] [<c0101364>] (__do_softirq) from [<c012b29c>]
(irq_exit+0x150/0x17c)
[ 50.297575] [<c012b29c>] (irq_exit) from [<c0196a08>]
(__handle_domain_irq+0x60/0xb0)
[ 50.305423] [<c0196a08>] (__handle_domain_irq) from [<c05d44fc>]
(gic_handle_irq+0x4c/0x90)
[ 50.313790] [<c05d44fc>] (gic_handle_irq) from [<c0100ed4>]
(__irq_usr+0x54/0x80)
[ 50.321287] Exception stack(0xecd99fb0 to 0xecd99ff8)
[ 50.326355] 9fa0: 1cf1aa74 00000001
00000001 00000000
[ 50.334547] 9fc0: 00000001 00000000 00000000 00000000 00000000 00000000
00004097 b6d17d14
[ 50.342738] 9fe0: 00000001 b6d17c60 00000000 b6e71f94 800b0010 ffffffff
[ 50.349364] irq event stamp: 2525027
[ 50.352955] hardirqs last enabled at (2525026): [<c0a6afec>]
net_rx_action+0xb4/0x4a4
[ 50.360892] hardirqs last disabled at (2525027): [<c0d6d2fc>]
_raw_spin_lock_irqsave+0x1c/0x50
[ 50.369517] softirqs last enabled at (2524660): [<c01015b4>]
__do_softirq+0x38c/0x53c
[ 50.377446] softirqs last disabled at (2524693): [<c012b29c>]
irq_exit+0x150/0x17c
[ 50.385027] ---[ end trace c0b571db4bc8087d ]---
The driver is calling dev_kfree_skb() from code inside a spinlock,
where h/w interrupts are disabled. This is forbidden, as documented
in include/linux/netdevice.h. The correct function to use
dev_kfree_skb_irq(), or dev_kfree_skb_any().
Fix by using the correct dev_kfree_skb_xxx() functions:
in lan743x_tx_release_desc():
called by lan743x_tx_release_completed_descriptors()
called by in lan743x_tx_napi_poll()
which holds a spinlock
called by lan743x_tx_release_all_descriptors()
called by lan743x_tx_close()
which can-sleep
conclusion: use dev_kfree_skb_any()
in lan743x_tx_xmit_frame():
which holds a spinlock
conclusion: use dev_kfree_skb_irq()
in lan743x_tx_close():
which can-sleep
conclusion: use dev_kfree_skb()
in lan743x_rx_release_ring_element():
called by lan743x_rx_close()
which can-sleep
called by lan743x_rx_open()
which can-sleep
conclusion: use dev_kfree_skb()
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Sven Van Asbroeck <thesve...@gmail.com>
---
Tree: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git # edbc21113bde
To: Jakub Kicinski <k...@kernel.org>
To: Bryan Whitehead <bryan.whiteh...@microchip.com>
To: "David S. Miller" <da...@davemloft.net>
Cc: Microchip Linux Driver Support <unglinuxdri...@microchip.com>
Cc: Andrew Lunn <and...@lunn.ch>
Cc: net...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
drivers/net/ethernet/microchip/lan743x_main.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c
b/drivers/net/ethernet/microchip/lan743x_main.c
index 9de970ec2056..a9fda2e6e715 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -1291,13 +1291,13 @@ static void lan743x_tx_release_desc(struct lan743x_tx
*tx,
goto clear_active;
if (!(buffer_info->flags & TX_BUFFER_INFO_FLAG_TIMESTAMP_REQUESTED)) {
- dev_kfree_skb(buffer_info->skb);
+ dev_kfree_skb_any(buffer_info->skb);
goto clear_skb;
}
if (cleanup) {
lan743x_ptp_unrequest_tx_timestamp(tx->adapter);
- dev_kfree_skb(buffer_info->skb);
+ dev_kfree_skb_any(buffer_info->skb);
} else {
ignore_sync = (buffer_info->flags &
TX_BUFFER_INFO_FLAG_IGNORE_SYNC) != 0;
@@ -1607,7 +1607,7 @@ static netdev_tx_t lan743x_tx_xmit_frame(struct
lan743x_tx *tx,
if (required_number_of_descriptors >
lan743x_tx_get_avail_desc(tx)) {
if (required_number_of_descriptors > (tx->ring_size - 1)) {
- dev_kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
} else {
/* save to overflow buffer */
tx->overflow_skb = skb;
@@ -1640,7 +1640,7 @@ static netdev_tx_t lan743x_tx_xmit_frame(struct
lan743x_tx *tx,
start_frame_length,
do_timestamp,
skb->ip_summed == CHECKSUM_PARTIAL)) {
- dev_kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
goto unlock;
}
@@ -1659,7 +1659,7 @@ static netdev_tx_t lan743x_tx_xmit_frame(struct
lan743x_tx *tx,
* frame assembler clean up was performed inside
* lan743x_tx_frame_add_fragment
*/
- dev_kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
goto unlock;
}
}
--
2.17.1
