On 11/9/20 10:46 AM, Alexey Kardashevskiy wrote: > PCI devices share 4 legacy INTx interrupts from the same PCI host bridge. > Device drivers map/unmap hardware interrupts via irq_create_mapping()/ > irq_dispose_mapping(). The problem with that these interrupts are > shared and when performing hot unplug, we need to unmap the interrupt > only when the last device is released.
The background context for such a need is that the POWER9 and POWER10 processors have a new XIVE interrupt controller which uses MMIO pages for interrupt management. Each interrupt has a pair of pages which are required to be unmapped in some environment, like PHB removal. And so, all interrupts need to be unmmaped. > > This reuses already existing irq_desc::kobj for this purpose. > The refcounter is naturally 1 when the descriptor is allocated already; > this adds kobject_get() in places where already existing mapped virq > is returned. > > This reorganizes irq_dispose_mapping() to release the kobj and let > the release callback do the cleanup. > > As kobject_put() is called directly now (not via RCU), it can also handle > the early boot case (irq_kobj_base==NULL) with the help of > the kobject::state_in_sysfs flag and without additional irq_sysfs_del(). Could this change be done in a following patch ? > While at this, clean up the comment at where irq_sysfs_del() was called.> > Quick grep shows no sign of irq reference counting in drivers. Drivers > typically request mapping when probing and dispose it when removing; Some ARM drivers call directly irq_alloc_descs() and irq_free_descs(). Is that a problem ? > platforms tend to dispose only if setup failed and the rest seems > calling one dispose per one mapping. Except (at least) PPC/pseries > which needs https://lkml.org/lkml/2020/10/27/259 > > Cc: Cédric Le Goater <c...@kaod.org> > Cc: Marc Zyngier <m...@kernel.org> > Cc: Michael Ellerman <m...@ellerman.id.au> > Cc: Qian Cai <c...@lca.pw> > Cc: Rob Herring <r...@kernel.org> > Cc: Frederic Barrat <fbar...@linux.ibm.com> > Cc: Michal Suchánek <msucha...@suse.de> > Cc: Thomas Gleixner <t...@linutronix.de> > Signed-off-by: Alexey Kardashevskiy <a...@ozlabs.ru> I used this patch and the ppc one doing the LSI removal: http://patchwork.ozlabs.org/project/linuxppc-dev/patch/20201027090655.14118-3-...@ozlabs.ru/ on different P10 and P9 systems, on a large system (>1K HW theads), KVM guests and pSeries machines. Checked that PHB removal was OK. Tested-by: Cédric Le Goater <c...@kaod.org> But IRQ subsystem covers much more than these systems. Some comments below, > --- > > This is what it is fixing for powerpc: > > There was a comment about whether hierarchical IRQ domains should > contribute to this reference counter and I need some help here as > I cannot see why. > It is reverse now - IRQs contribute to domain->mapcount and > irq_domain_associate/irq_domain_disassociate take necessary steps to > keep this counter in order. What might be missing is that if we have > cascade of IRQs (as in the IOAPIC example from > Documentation/core-api/irq/irq-domain.rst ), then a parent IRQ should > contribute to the children IRQs and it is up to > irq_domain_ops::alloc/free hooks, and they all seem to be eventually > calling irq_domain_alloc_irqs_xxx/irq_domain_free_irqs_xxx which seems > right. > > Documentation/core-api/irq/irq-domain.rst also suggests there is a lot > to see in debugfs about IRQs but on my thinkpad there nothing about > hierarchy. > > So I'll ask again :) > > What is the easiest way to get irq-hierarchical hardware? > I have a bunch of powerpc boxes (no good) but also a raspberry pi, > a bunch of 32/64bit orange pi's, an "armada" arm box, > thinkpads - is any of this good for the task? > > > > --- > Changes: > v3: > * removed very wrong kobject_get/_put from irq_domain_associate/ > irq_domain_disassociate as these are called from kobject_release so > irq_descs were never actually released > * removed irq_sysfs_del as 1) we do not seem to need it with changed > counting 2) produces a "no parent" warning as it would be called from > kobject_release which removes sysfs nodes itself > > v2: > * added more get/put, including irq_domain_associate/irq_domain_disassociate > --- > kernel/irq/irqdesc.c | 55 ++++++++++++++++++------------------------ > kernel/irq/irqdomain.c | 37 ++++++++++++++++------------ > 2 files changed, 46 insertions(+), 46 deletions(-) > > diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c > index 1a7723604399..79c904ebfd5c 100644 > --- a/kernel/irq/irqdesc.c > +++ b/kernel/irq/irqdesc.c > @@ -295,18 +295,6 @@ static void irq_sysfs_add(int irq, struct irq_desc *desc) > } > } > > -static void irq_sysfs_del(struct irq_desc *desc) > -{ > - /* > - * If irq_sysfs_init() has not yet been invoked (early boot), then > - * irq_kobj_base is NULL and the descriptor was never added. > - * kobject_del() complains about a object with no parent, so make > - * it conditional. > - */ > - if (irq_kobj_base) > - kobject_del(&desc->kobj); > -} > - > static int __init irq_sysfs_init(void) > { > struct irq_desc *desc; > @@ -337,7 +325,6 @@ static struct kobj_type irq_kobj_type = { > }; > > static void irq_sysfs_add(int irq, struct irq_desc *desc) {} > -static void irq_sysfs_del(struct irq_desc *desc) {} > > #endif /* CONFIG_SYSFS */ > > @@ -419,20 +406,40 @@ static struct irq_desc *alloc_desc(int irq, int node, > unsigned int flags, > return NULL; > } > > +static void delayed_free_desc(struct rcu_head *rhp); Can you move delayed_free_desc() here ? It is small. > static void irq_kobj_release(struct kobject *kobj) > { > struct irq_desc *desc = container_of(kobj, struct irq_desc, kobj); > +#ifdef CONFIG_IRQ_DOMAIN may be, we could use IS_ENABLED(CONFIG_IRQ_DOMAIN) and add a specific routine for the domain case. > + struct irq_domain *domain; > + unsigned int virq = desc->irq_data.irq; > > - free_masks(desc); > - free_percpu(desc->kstat_irqs); > - kfree(desc); > + domain = desc->irq_data.domain; > + if (domain) { > + if (irq_domain_is_hierarchy(domain)) { > + irq_domain_free_irqs(virq, 1); > + } else { > + irq_domain_disassociate(domain, virq); > + irq_free_desc(virq); > + } > + } > +#endif > + /* > + * We free the descriptor, masks and stat fields via RCU. That > + * allows demultiplex interrupts to do rcu based management of > + * the child interrupts. > + * This also allows us to use rcu in kstat_irqs_usr(). > + */ > + call_rcu(&desc->rcu, delayed_free_desc); > } > > static void delayed_free_desc(struct rcu_head *rhp) > { > struct irq_desc *desc = container_of(rhp, struct irq_desc, rcu); > > - kobject_put(&desc->kobj); > + free_masks(desc); > + free_percpu(desc->kstat_irqs); > + kfree(desc); > } > > static void free_desc(unsigned int irq)> > @@ -443,24 +450,10 @@ static void free_desc(unsigned int irq) > unregister_irq_proc(irq, desc); > > /* > - * sparse_irq_lock protects also show_interrupts() and > - * kstat_irq_usr(). Once we deleted the descriptor from the > - * sparse tree we can free it. Access in proc will fail to > - * lookup the descriptor. > - * > * The sysfs entry must be serialized against a concurrent > * irq_sysfs_init() as well. > */ > - irq_sysfs_del(desc); I would leave that change in another patch. > delete_irq_desc(irq); > - > - /* > - * We free the descriptor, masks and stat fields via RCU. That > - * allows demultiplex interrupts to do rcu based management of > - * the child interrupts. > - * This also allows us to use rcu in kstat_irqs_usr(). > - */ > - call_rcu(&desc->rcu, delayed_free_desc); > } > > static int alloc_descs(unsigned int start, unsigned int cnt, int node, > diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c > index cf8b374b892d..d79d679bec35 100644 > --- a/kernel/irq/irqdomain.c > +++ b/kernel/irq/irqdomain.c > @@ -638,6 +638,7 @@ unsigned int irq_create_mapping(struct irq_domain *domain, > { > struct device_node *of_node; > int virq; > + struct irq_desc *desc; > > pr_debug("irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq); > > @@ -655,7 +656,9 @@ unsigned int irq_create_mapping(struct irq_domain *domain, > /* Check if mapping already exists */ > virq = irq_find_mapping(domain, hwirq); > if (virq) { > + desc = irq_to_desc(virq); > pr_debug("-> existing mapping on virq %d\n", virq); > + kobject_get(&desc->kobj); Could we have an inline helper irq_desc_get() to do : struct irq_desc *desc = irq_to_desc(virq); kobject_get(&desc->kobj); It will remove quite a few lines. Whether it takes a 'struct irq_desc' or 'int virq' as a parameter, is up to you I guess. It's good way to hide the mapping counter used to get a mapping reference also. We might change it to its own variable if we find issues. > return virq; > } > > @@ -751,6 +754,7 @@ unsigned int irq_create_fwspec_mapping(struct irq_fwspec > *fwspec) > irq_hw_number_t hwirq; > unsigned int type = IRQ_TYPE_NONE; > int virq; > + struct irq_desc *desc; > > if (fwspec->fwnode) { > domain = irq_find_matching_fwspec(fwspec, DOMAIN_BUS_WIRED); > @@ -787,8 +791,11 @@ unsigned int irq_create_fwspec_mapping(struct irq_fwspec > *fwspec) > * current trigger type then we are done so return the > * interrupt number. > */ > - if (type == IRQ_TYPE_NONE || type == irq_get_trigger_type(virq)) > + if (type == IRQ_TYPE_NONE || type == > irq_get_trigger_type(virq)) { > + desc = irq_to_desc(virq); > + kobject_get(&desc->kobj); > return virq; > + } > > /* > * If the trigger type has not been set yet, then set > @@ -800,6 +807,8 @@ unsigned int irq_create_fwspec_mapping(struct irq_fwspec > *fwspec) > return 0; > > irqd_set_trigger_type(irq_data, type); > + desc = irq_to_desc(virq); > + kobject_get(&desc->kobj); > return virq; > } > > @@ -852,22 +861,12 @@ EXPORT_SYMBOL_GPL(irq_create_of_mapping); > */ > void irq_dispose_mapping(unsigned int virq) > { > - struct irq_data *irq_data = irq_get_irq_data(virq); > - struct irq_domain *domain; > + struct irq_desc *desc = irq_to_desc(virq); > > - if (!virq || !irq_data) > + if (!virq || !desc) > return; > > - domain = irq_data->domain; > - if (WARN_ON(domain == NULL)) > - return; > - > - if (irq_domain_is_hierarchy(domain)) { > - irq_domain_free_irqs(virq, 1); > - } else { > - irq_domain_disassociate(domain, virq); > - irq_free_desc(virq); > - } > + kobject_put(&desc->kobj); > } > EXPORT_SYMBOL_GPL(irq_dispose_mapping); > > @@ -1413,6 +1412,7 @@ int __irq_domain_alloc_irqs(struct irq_domain *domain, > int irq_base, > bool realloc, const struct irq_affinity_desc > *affinity) > { > int i, ret, virq; > + bool get_ref = false; This needs a comment on why we are not always getting a ref and anyhow this looks hacky. > > if (domain == NULL) { > domain = irq_default_domain; > @@ -1422,6 +1422,7 @@ int __irq_domain_alloc_irqs(struct irq_domain *domain, > int irq_base, > > if (realloc && irq_base >= 0) { > virq = irq_base; > + get_ref = true; The realloc flag is only used for old x86 HW and the IRQ IPI API. Could we make special IRQ routines for these callers and let them handle the get ref ? C. > } else { > virq = irq_domain_alloc_descs(irq_base, nr_irqs, 0, node, > affinity); > @@ -1453,8 +1454,14 @@ int __irq_domain_alloc_irqs(struct irq_domain *domain, > int irq_base, > } > } > > - for (i = 0; i < nr_irqs; i++) > + for (i = 0; i < nr_irqs; i++) { > irq_domain_insert_irq(virq + i); > + if (get_ref) { > + struct irq_desc *desc = irq_to_desc(virq + i); > + > + kobject_get(&desc->kobj); > + } > + } > mutex_unlock(&irq_domain_mutex); > > return virq; >
