Re: [PATCH] counter: microchip-tcb-capture: Fix CMR value check

[Jonathan Cameron]

On Wed, 11 Nov 2020 11:38:07 -0500
William Breathitt Gray <vilhelm.g...@gmail.com> wrote:

> The ATMEL_TC_ETRGEDG_* defines are not masks but rather possible values
> for CMR. This patch fixes the action_get() callback to properly check
> for these values rather than mask them.
> 
> Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
> Cc: Kamel Bouhara <kamel.bouh...@bootlin.com>
> Signed-off-by: William Breathitt Gray <vilhelm.g...@gmail.com>

Looks fine to me, but ideally after an ack from Kamel

Thanks,

Jonathan

> ---
>  drivers/counter/microchip-tcb-capture.c | 16 ++++++++++------
>  1 file changed, 10 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/counter/microchip-tcb-capture.c 
> b/drivers/counter/microchip-tcb-capture.c
> index 039c54a78aa5..142b389fc9db 100644
> --- a/drivers/counter/microchip-tcb-capture.c
> +++ b/drivers/counter/microchip-tcb-capture.c
> @@ -183,16 +183,20 @@ static int mchp_tc_count_action_get(struct 
> counter_device *counter,
>  
>       regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], CMR), &cmr);
>  
> -     *action = MCHP_TC_SYNAPSE_ACTION_NONE;
> -
> -     if (cmr & ATMEL_TC_ETRGEDG_NONE)
> +     switch (cmr & ATMEL_TC_ETRGEDG_BOTH) {
> +     default:
>               *action = MCHP_TC_SYNAPSE_ACTION_NONE;
> -     else if (cmr & ATMEL_TC_ETRGEDG_RISING)
> +             break;
> +     case ATMEL_TC_ETRGEDG_RISING:
>               *action = MCHP_TC_SYNAPSE_ACTION_RISING_EDGE;
> -     else if (cmr & ATMEL_TC_ETRGEDG_FALLING)
> +             break;
> +     case ATMEL_TC_ETRGEDG_FALLING:
>               *action = MCHP_TC_SYNAPSE_ACTION_FALLING_EDGE;
> -     else if (cmr & ATMEL_TC_ETRGEDG_BOTH)
> +             break;
> +     case ATMEL_TC_ETRGEDG_BOTH:
>               *action = MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE;
> +             break;
> +     }
>  
>       return 0;
>  }