From: V Sujith Kumar Reddy <vsuji...@codeaurora.org>
Change LPASS MI2S gpio configuration to pull down from pull up.
Fixes: 9b72f4e6a3f8 (arm64: dts: qcom: sc7180: Add lpass cpu node for I2S
driver)
Signed-off-by: V Sujith Kumar Reddy <vsuji...@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <sriva...@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 802ea0a..b0419e0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1751,8 +1751,8 @@
pinconf {
pins = "gpio49", "gpio50", "gpio51";
- drive-strength = <8>;
- bias-pull-up;
+ drive-strength = <2>;
+ bias-pull-down;
};
};
@@ -1764,8 +1764,8 @@
pinconf {
pins = "gpio53", "gpio54", "gpio55",
"gpio56";
- drive-strength = <8>;
- bias-pull-up;
+ drive-strength = <2>;
+ bias-pull-down;
};
};
@@ -1777,8 +1777,8 @@
pinconf {
pins = "gpio57";
- drive-strength = <8>;
- bias-pull-up;
+ drive-strength = <2>;
+ bias-pull-down;
};
};
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
