Add support to protection domain restart. Protection domain restart
would also restart the service just like SSR.

Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
---
 drivers/slimbus/Kconfig         |  1 +
 drivers/slimbus/qcom-ngd-ctrl.c | 24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig
index 7c950948a9ec..060a2c65978a 100644
--- a/drivers/slimbus/Kconfig
+++ b/drivers/slimbus/Kconfig
@@ -26,6 +26,7 @@ config SLIM_QCOM_NGD_CTRL
        depends on ARCH_QCOM || COMPILE_TEST
        select QCOM_QMI_HELPERS
        select QCOM_RPROC_COMMON
+       select QCOM_PDR_HELPERS
        help
          Select driver if Qualcomm's SLIMbus Satellite Non-Generic Device
          Component is programmed using Linux kernel.
diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index f62693653d2b..d8decb345e9d 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/io.h>
 #include <linux/soc/qcom/qmi.h>
+#include <linux/soc/qcom/pdr.h>
 #include <net/sock.h>
 #include "slimbus.h"
 
@@ -166,6 +167,7 @@ struct qcom_slim_ngd_ctrl {
        struct mutex ssr_lock;
        struct notifier_block nb;
        void *notifier;
+       struct pdr_handle *pdr;
        enum qcom_slim_ngd_state state;
        dma_addr_t rx_phys_base;
        dma_addr_t tx_phys_base;
@@ -1382,6 +1384,7 @@ static int qcom_slim_ngd_ssr_pdr_notify(struct 
qcom_slim_ngd_ctrl *ctrl,
 {
        switch (action) {
         case QCOM_SSR_BEFORE_SHUTDOWN:
+       case SERVREG_SERVICE_STATE_DOWN:
                /* Make sure the last dma xfer is finished */
                mutex_lock(&ctrl->tx_lock);
                if (ctrl->state != QCOM_SLIM_NGD_CTRL_DOWN) {
@@ -1393,6 +1396,7 @@ static int qcom_slim_ngd_ssr_pdr_notify(struct 
qcom_slim_ngd_ctrl *ctrl,
                mutex_unlock(&ctrl->tx_lock);
                 break;
         case QCOM_SSR_AFTER_POWERUP:
+       case SERVREG_SERVICE_STATE_UP:
                schedule_work(&ctrl->ngd_up_work);
                break;
         default:
@@ -1412,6 +1416,12 @@ static int qcom_slim_ngd_ssr_notify(struct 
notifier_block *nb,
        return qcom_slim_ngd_ssr_pdr_notify(ctrl, action);
 }
 
+static void slim_pd_status(int state, char *svc_path, void *priv)
+{
+       struct qcom_slim_ngd_ctrl *ctrl = (struct qcom_slim_ngd_ctrl *)priv;
+
+       qcom_slim_ngd_ssr_pdr_notify(ctrl, state);
+}
 static int of_qcom_slim_ngd_register(struct device *parent,
                                     struct qcom_slim_ngd_ctrl *ctrl)
 {
@@ -1499,6 +1509,7 @@ static int qcom_slim_ngd_ctrl_probe(struct 
platform_device *pdev)
        struct qcom_slim_ngd_ctrl *ctrl;
        struct resource *res;
        int ret;
+       struct pdr_service *pds;
 
        ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
        if (!ctrl)
@@ -1549,6 +1560,18 @@ static int qcom_slim_ngd_ctrl_probe(struct 
platform_device *pdev)
        init_completion(&ctrl->qmi.qmi_comp);
        init_completion(&ctrl->qmi_up);
 
+       ctrl->pdr = pdr_handle_alloc(slim_pd_status, ctrl);
+       if (IS_ERR(ctrl->pdr)) {
+               dev_err(dev, "Failed to init PDR handle\n");
+               return PTR_ERR(ctrl->pdr);
+       }
+
+       pds = pdr_add_lookup(ctrl->pdr, "avs/audio", "msm/adsp/audio_pd");
+       if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) {
+               dev_err(dev, "pdr add lookup failed: %d\n", ret);
+               return PTR_ERR(pds);
+       }
+
        platform_driver_register(&qcom_slim_ngd_driver);
        return of_qcom_slim_ngd_register(dev, ctrl);
 }
@@ -1565,6 +1588,7 @@ static int qcom_slim_ngd_remove(struct platform_device 
*pdev)
        struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev);
 
        pm_runtime_disable(&pdev->dev);
+       pdr_handle_release(ctrl->pdr);
        qcom_unregister_ssr_notifier(ctrl->notifier, &ctrl->nb);
        qcom_slim_ngd_enable(ctrl, false);
        qcom_slim_ngd_exit_dma(ctrl);
-- 
2.21.0

Reply via email to