Add binding doc for fsl,spba-bus. Signed-off-by: Adam Ford <aford...@gmail.com> --- make dt_binding_check -j8 |grep spba DTEX Documentation/devicetree/bindings/bus/fsl,spba-bus.example.dts DTC Documentation/devicetree/bindings/bus/fsl,spba-bus.example.dt.yaml CHECK Documentation/devicetree/bindings/bus/fsl,spba-bus.example.dt.yaml
V5: Rebase on 5.10-rc2 to be able to check yaml Add Reg entry V4: Remove an accidental makefile change Move type:object under additional properties V3: Rebase sample from aips-bus example Split off from series adding i.MX8M Nano functions to reduce noise V2: Attempted to update yaml from feedback diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml new file mode 100644 index 000000000000..e9f77ecae3d3 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/fsl,spba-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Shared Peripherals Bus Interface + +maintainers: + - Shawn Guo <shawn...@kernel.org> + +description: | + A simple bus enabling access to shared peripherals. + + The "spba-bus" follows the "simple-bus" set of properties, as + specified in the Devicetree Specification. It is an extension of + "simple-bus" because the SDMA controller uses this compatible flag to + determine which peripherals are available to it and the range over which + the SDMA can access. There are no special clocks for the bus, because + the SDMA controller itself has its interrupt, and clock assignments. + +select: + properties: + compatible: + contains: + const: fsl,spba-bus + required: + - compatible + +properties: + $nodename: + pattern: "^bus(@[0-9a-f]+)?$" + + compatible: + items: + - const: fsl,spba-bus + - const: simple-bus + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + reg: + maxItems: 1 + + ranges: true + +required: + - compatible + - '#address-cells' + - '#size-cells' + - reg + - ranges + +additionalProperties: + type: object + +examples: + - | + bus@30000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x100000>; + ranges; + }; -- 2.25.1