Hi! I'm getting this warning during boot:
[ 3.413299] gpio gpiochip1: Persistence not supported for GPIO 0
[ 3.419494] cpcap-usb-phy cpcap-usb-phy.0: could not initialize VBUS or ID
IIO: -517
[ 3.427398] ------------[ cut here ]------------
[ 3.432067] WARNING: CPU: 0 PID: 1 at drivers/regulator/core.c:2123
_regulator_put.part.2+0x168/0x17c
[ 3.441406] Modules linked in:
[ 3.444519] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.10.0-rc4-next-20201120-dirty #198
[ 3.452728] Hardware name: Generic OMAP4 (Flattened Device Tree)
[ 3.458801] [<c010db44>] (unwind_backtrace) from [<c0109ec0>]
(show_stack+0x10/0x14)
[ 3.466613] [<c0109ec0>] (show_stack) from [<c095561c>]
(dump_stack+0xb8/0xd4)
[ 3.473876] [<c095561c>] (dump_stack) from [<c0953208>] (__warn+0xa8/0xd0)
[ 3.480804] [<c0953208>] (__warn) from [<c095327c>]
(warn_slowpath_fmt+0x4c/0x98)
[ 3.488311] [<c095327c>] (warn_slowpath_fmt) from [<c0479b90>]
(_regulator_put.part.2+0x168/0x17c)
[ 3.497344] [<c0479b90>] (_regulator_put.part.2) from [<c0479bcc>]
(regulator_put+0x28/0x38)
[ 3.505828] [<c0479bcc>] (regulator_put) from [<c053a86c>]
(release_nodes+0x1a0/0x248)
[ 3.513793] [<c053a86c>] (release_nodes) from [<c05366b8>]
(really_probe+0x104/0x3b4)
[ 3.521667] [<c05366b8>] (really_probe) from [<c0536acc>]
(driver_probe_device+0x58/0xb4)
[ 3.529907] [<c0536acc>] (driver_probe_device) from [<c0534b34>]
(bus_for_each_drv+0x70/0x94)
[ 3.538482] [<c0534b34>] (bus_for_each_drv) from [<c0536540>]
(__device_attach+0xbc/0x128)
(and then cpcap does not work). Is my configuration missing something?
Later I get warnings about framedone interrupt not being done (IIRC)
from HDMI audio module, and I have screen freezing in framebuffer.
Any ideas?
Best regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
signature.asc
Description: PGP signature
