Hi Sylwester, On 11/12/20 11:09 PM, Sylwester Nawrocki wrote: > > This patchset adds interconnect API support for the Exynos SoC "samsung, > exynos-bus" compatible devices, which already have their corresponding > exynos-bus driver in the devfreq subsystem. Complementing the devfreq > driver with an interconnect functionality allows to ensure the QoS > requirements of devices accessing the system memory (e.g. video processing > devices) are fulfilled and allows to avoid issues like the one discussed > in thread [1]. > > This patch series adds implementation of the interconnect provider per each > "samsung,exynos-bus" compatible DT node, with one interconnect node per > provider. The interconnect code which was previously added as a part of > the devfreq driver has been converted to a separate platform driver. > In the devfreq a corresponding virtual child platform device is registered. > Integration of devfreq and interconnect frameworks is achieved through > the PM QoS API. > > A sample interconnect consumer for exynos-mixer is added in patch 5/5, > it is currently added only for exynos4412 and allows to address the > mixer DMA underrun error issues [1]. > > Changes since v8: > - excluded from the series already applied dts patches, > - Co-developed-by/Signed-off-by tag corrections, Ack tags added, > - the maintainers entry corrections adressing review comments, > - Kconfig/Makefile improvements/corrections, > - whitespace/indentation cleanup. > > The series has been tested on Odroid U3 board. It is based on v5.10-rc1. > > -- > Regards, > Sylwester > > Changes since v7: > - drivers/interconnect/exynos renamed to drivers/interconnect/samsung, > - added INTERCONNECT_SAMSUNG Kconfig symbol, > - added missing driver sync_state callback, > - improved the DT binding description, > - added a patch adding maintainers entry, > - updated comment in patch 7/7, typo fix (patch 1/7). > > Changes since v6: > - the interconnect consumer DT bindings are now used to describe dependencies > of the interconnects (samsung,exynos-bus nodes), > - bus-width property replaced with samsung,data-clk-ratio, > - adaptation to recent changes in the interconnect code > (of_icc_get_from_provider(), icc_node_add()). > > Changes since v5: > - addition of "bus-width: DT property, which specifies data width > of the interconnect bus (patches 1...2/6), > - addition of synchronization of the interconnect bandwidth setting > with VSYNC (patch 6/6). > > Changes since v3 [4] (v4 skipped to align with patchset [1]), detailed > changes are listed in patches: > - conversion to a separate interconnect (platform) driver, > - an update of the DT binding documenting new optional properties: > #interconnect-cells, samsung,interconnect-parent in "samsung,exynos-bus" > nodes, > - new DT properties added to the SoC, rather than to the board specific > files. > > Changes since v2 [5]: > - Use icc_std_aggregate(). > - Implement a different modification of apply_constraints() in > drivers/interconnect/core.c (patch 03). > - Use 'exynos,interconnect-parent-node' in the DT instead of > 'devfreq'/'parent', depending on the bus. > - Rebase on DT patches that deprecate the 'devfreq' DT property. > - Improve error handling, including freeing generated IDs on failure. > - Remove exynos_bus_icc_connect() and add exynos_bus_icc_get_parent(). > > Changes since v1 [6]: > - Rebase on coupled regulators patches. > - Use dev_pm_qos_*() API instead of overriding frequency in > exynos_bus_target(). > - Use IDR for node ID allocation. > - Reverse order of multiplication and division in > mixer_set_memory_bandwidth() (patch 07) to avoid integer overflow. > > > References: > [1] https://patchwork.kernel.org/patch/10861757/ (original issue) > [2] > https://protect2.fireeye.com/v1/url?k=0c5b42ec-53c07bee-0c5ac9a3-0cc47a31381a-25eb9fb6f0f852e5&q=1&e=3074012f-8e28-49a9-9773-669dbeefe1a6&u=https%3A%2F%2Fwww.spinics.net%2Flists%2Flinux-samsung-soc%2Fmsg70014.html > [3] > https://protect2.fireeye.com/v1/url?k=f3fdf673-ac66cf71-f3fc7d3c-0cc47a31381a-8ab39522e9fe68a8&q=1&e=3074012f-8e28-49a9-9773-669dbeefe1a6&u=https%3A%2F%2Fwww.spinics.net%2Flists%2Farm-kernel%2Fmsg810722.html > [4] > https://lore.kernel.org/linux-pm/20191220115653.6487-1-a.swi...@samsung.com > [5] https://patchwork.kernel.org/cover/11054417/ (v1 of this RFC) > [6] https://patchwork.kernel.org/cover/11152595/ (v2 of this RFC) > > > Sylwester Nawrocki (5): > dt-bindings: devfreq: Add documentation for the interconnect > properties > interconnect: Add generic interconnect driver for Exynos SoCs > MAINTAINERS: Add entry for Samsung interconnect drivers > PM / devfreq: exynos-bus: Add registration of interconnect child > device > drm: exynos: mixer: Add interconnect support > > .../devicetree/bindings/devfreq/exynos-bus.txt | 71 +++++++- > MAINTAINERS | 8 + > drivers/devfreq/exynos-bus.c | 17 ++ > drivers/gpu/drm/exynos/exynos_mixer.c | 146 ++++++++++++++- > drivers/interconnect/Kconfig | 1 + > drivers/interconnect/Makefile | 1 + > drivers/interconnect/samsung/Kconfig | 13 ++ > drivers/interconnect/samsung/Makefile | 4 + > drivers/interconnect/samsung/exynos.c | 199 > +++++++++++++++++++++ > 9 files changed, 450 insertions(+), 10 deletions(-) > create mode 100644 drivers/interconnect/samsung/Kconfig > create mode 100644 drivers/interconnect/samsung/Makefile > create mode 100644 drivers/interconnect/samsung/exynos.c >
I checked that the icc patches were merged to icc.git. So, I applied patch1 and patch4 to devfreq.git. -- Best Regards, Chanwoo Choi Samsung Electronics
