From: Chen-Yu Tsai <[email protected]>
[ Upstream commit b1064037e8ecf09d587b7b4966eebe0c362908e5 ]
The Ethernet PHY on the Cubieboard 4 and A80 Optimus have the RX
and TX delays enabled on the PHY, using pull-ups on the RXDLY and
TXDLY pins.
Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 98048143b7f8 ("ARM: dts: sun9i: cubieboard4: Enable GMAC")
Fixes: bc9bd03a44f9 ("ARM: dts: sun9i: a80-optimus: Enable GMAC")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index d3b337b043a15..484b93df20cb6 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -129,7 +129,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_cldo1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts
b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index bbc6335e56314..5c3580d712e40 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -124,7 +124,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_cldo1>;
status = "okay";
};
--
2.27.0
