From: Sergey Matyukevich <geoma...@gmail.com>
[ Upstream commit 7dd8f0ba88fce98e2953267a66af74c6f4792a56 ]
Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY") fixed micrel phy driver adding proper support for phy
modes. Adapt imx6q-udoo board phy settings : explicitly set required
delay configuration using "rgmii-id".
Fixes: cbd54fe0b2bc ("ARM: dts: imx6dl-udoo: Add board support based off
imx6q-udoo")
Signed-off-by: Sergey Matyukevich <geoma...@gmail.com>
Reviewed-by: Fabio Estevam <feste...@gmail.com>
Signed-off-by: Shawn Guo <shawn...@kernel.org>
Signed-off-by: Sasha Levin <sas...@kernel.org>
---
arch/arm/boot/dts/imx6qdl-udoo.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 1211da894ee99..061e6a00b2557 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -39,7 +39,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
--
2.27.0
