Hi Hsin-Yi,
Thank you for your patch.
On 24/11/20 5:12, Hsin-Yi Wang wrote:
> Add pwm to mt8183 and backlight to mt8183-kukui.
>
> Signed-off-by: Hsin-Yi Wang <hsi...@chromium.org>
> ---
Picked the patch and checked that pwm for the backlight is working as expected
on my Lenovo Ideapad Duet.
Tested-by: Enric Balletbo i Serra <enric.balle...@collabora.com>
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 28 +++++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 10 +++++++
> 2 files changed, 38 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index 85f7c33ba4461..bf2ad1294dd30 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -19,6 +19,17 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + backlight_lcd0: backlight_lcd0 {
> + compatible = "pwm-backlight";
> + pwms = <&pwm0 0 500000>;
> + power-supply = <&bl_pp5000>;
> + enable-gpios = <&pio 176 0>;
> + brightness-levels = <0 1023>;
> + num-interpolated-steps = <1023>;
> + default-brightness-level = <576>;
> + status = "okay";
> + };
> +
> memory@40000000 {
> device_type = "memory";
> reg = <0 0x40000000 0 0x80000000>;
> @@ -536,6 +547,17 @@ pins_clk {
> };
> };
>
> + pwm0_pin_default: pwm0_pin_default {
> + pins1 {
> + pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
> + output-high;
> + bias-pull-up;
> + };
> + pins2 {
> + pinmux = <PINMUX_GPIO43__FUNC_DISP_PWM>;
> + };
> + };
> +
> scp_pins: scp {
> pins_scp_uart {
> pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
> @@ -670,6 +692,12 @@ pins_wifi_wakeup {
> };
> };
>
> +&pwm0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm0_pin_default>;
> +};
> +
> &scp {
> status = "okay";
> pinctrl-names = "default";
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 08a914d3a6435..a974bad899365 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -479,6 +479,16 @@ spi0: spi@1100a000 {
> status = "disabled";
> };
>
> + pwm0: pwm@1100e000 {
> + compatible = "mediatek,mt8183-disp-pwm";
> + reg = <0 0x1100e000 0 0x1000>;
> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
> + #pwm-cells = <2>;
> + clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>,
> + <&infracfg CLK_INFRA_DISP_PWM>;
> + clock-names = "main", "mm";
> + };
> +
> i2c3: i2c@1100f000 {
> compatible = "mediatek,mt8183-i2c";
> reg = <0 0x1100f000 0 0x1000>,
>
