From: Lad Prabhakar <[email protected]> The 8-bit ov7725 sensors can also be connected to the camera daughter board.
This patch creates a separate dtsi file to describe an ov7725 sensor, and includes it multiple times in r8a7742-iwg21d-q7-dbcm-ca.dts. The user can (un)comment #include statements depending on the cameras connected. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Biju Das <[email protected]> [geert: describe a single camera in the .dtsi, include multiple times] Signed-off-by: Geert Uytterhoeven <[email protected]> --- v4: - Describe a single camera in the .dtsi file, - Include the .dtsi multiple times, .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 6 ++++- .../r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi | 27 +++++++++++++++++++ 2 files changed, 32 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts index 00634eb58ce39da5..4d95991bde09c28b 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts @@ -198,7 +198,7 @@ &scifb1 { /* * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints * - * Uncomment the #include statements to change configuration + * (un)comment the #include statements to change configuration */ /* 8bit CMOS Camera 1 (J13) */ @@ -208,6 +208,7 @@ &scifb1 { #define VIN_EP vin0ep #undef CAM_ENABLED #include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" #ifdef CAM_ENABLED &vin0 { @@ -241,6 +242,7 @@ vin0ep: endpoint { #define VIN_EP vin1ep #undef CAM_ENABLED #include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" #ifdef CAM_ENABLED &vin1 { @@ -272,6 +274,7 @@ vin1ep: endpoint { #define VIN_EP vin2ep #undef CAM_ENABLED #include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" #ifdef CAM_ENABLED &vin2 { @@ -302,6 +305,7 @@ vin2ep: endpoint { #define VIN_EP vin3ep #undef CAM_ENABLED #include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" #ifdef CAM_ENABLED &vin3 { diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi new file mode 100644 index 0000000000000000..46a6832694d78aaa --- /dev/null +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This include file ties a VIN interface with a single ov7725 sensor on + * the iWave-RZ/G1H Qseven board development platform connected with the + * camera daughter board. + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#define CAM_ENABLED 1 + +&CAM_PARENT_I2C { + ov7725@21 { + compatible = "ovti,ov7725"; + reg = <0x21>; + clocks = <&MCLK_CAM>; + status = "okay"; + + port { + CAM_EP: endpoint { + bus-width = <8>; + bus-type = <6>; + remote-endpoint = <&VIN_EP>; + }; + }; + }; +}; -- 2.25.1
