On Fri, Nov 20, 2020 at 01:56:03AM +0200, Cristian Ciocaltea wrote: > Add MMC controller nodes for Actions Semi S500 SoC, in order to > facilitate access to SD/EMMC/SDIO cards. > > Signed-off-by: Cristian Ciocaltea <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]> Thanks, Mani > --- > arch/arm/boot/dts/owl-s500.dtsi | 33 +++++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi > index b16172615db0..7af7c9e1119d 100644 > --- a/arch/arm/boot/dts/owl-s500.dtsi > +++ b/arch/arm/boot/dts/owl-s500.dtsi > @@ -241,5 +241,38 @@ dma: dma-controller@b0260000 { > clocks = <&cmu CLK_DMAC>; > power-domains = <&sps S500_PD_DMA>; > }; > + > + mmc0: mmc@b0230000 { > + compatible = "actions,s500-mmc", "actions,owl-mmc"; > + reg = <0xb0230000 0x38>; > + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD0>; > + resets = <&cmu RESET_SD0>; > + dmas = <&dma 2>; > + dma-names = "mmc"; > + status = "disabled"; > + }; > + > + mmc1: mmc@b0234000 { > + compatible = "actions,s500-mmc", "actions,owl-mmc"; > + reg = <0xb0234000 0x38>; > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD1>; > + resets = <&cmu RESET_SD1>; > + dmas = <&dma 3>; > + dma-names = "mmc"; > + status = "disabled"; > + }; > + > + mmc2: mmc@b0238000 { > + compatible = "actions,s500-mmc", "actions,owl-mmc"; > + reg = <0xb0238000 0x38>; > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD2>; > + resets = <&cmu RESET_SD2>; > + dmas = <&dma 4>; > + dma-names = "mmc"; > + status = "disabled"; > + }; > }; > }; > -- > 2.29.2 >
