On 18/09/2020 18:33, Srinivasa Rao Mandadapu wrote:
From: Ajit Pandey <aj...@codeaurora.org> Add the I2S controller node to sc7180 dtsi. Add pinmux for primary and secondary I2S. Signed-off-by: Ajit Pandey <aj...@codeaurora.org> Signed-off-by: Cheng-Yi Chiang <cychi...@chromium.org> Signed-off-by: V Sujith Kumar Reddy <vsuji...@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <sriva...@codeaurora.org> ---
Reviewed-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
Changes since v3: -- The typo error fix Changes since v2: -- The plement of lpass_cpu node is changed Changes since v1: -- Updated I2S pin control nodes with grouping common pin controls -- Updated lpass_cpu node with proper control names arch/arm64/boot/dts/qcom/sc7180.dtsi | 69 ++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 6678f1e..427a4bf 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1742,6 +1742,45 @@ }; };+ sec_mi2s_active: sec-mi2s-active {+ pinmux { + pins = "gpio49", "gpio50", "gpio51"; + function = "mi2s_1"; + }; + + pinconf { + pins = "gpio49", "gpio50", "gpio51"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_active: pri-mi2s-active { + pinmux { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + function = "mi2s_0"; + }; + + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_mclk_active: pri-mi2s-mclk-active { + pinmux { + pins = "gpio57"; + function = "lpass_ext"; + }; + + pinconf { + pins = "gpio57"; + drive-strength = <8>; + bias-pull-up; + }; + }; + sdc1_on: sdc1-on { pinconf-clk { pins = "sdc1_clk"; @@ -3389,6 +3428,36 @@ #power-domain-cells = <1>; };+ lpass_cpu: lpass@62f00000 {+ compatible = "qcom,sc7180-lpass-cpu"; + + reg = <0 0x62f00000 0 0x29000>; + reg-names = "lpass-lpaif"; + + iommus = <&apps_smmu 0x1020 0>; + + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, + <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; + + clock-names = "pcnoc-sway-clk", "audio-core", + "mclk0", "pcnoc-mport-clk", + "mi2s-bit-clk0", "mi2s-bit-clk1"; + + + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif"; + }; + lpass_hm: clock-controller@63000000 { compatible = "qcom,sc7180-lpasshm"; reg = <0 0x63000000 0 0x28>;
