Use reset_control_rearm() call if an error occurs in case phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used and the reset line may be triggered again by other devices.
reset_control_rearm() keeps use of triggered_count sane in the reset framework. Therefore, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by: Amjad Ouled-Ameur <aouledam...@baylibre.com> Reported-by: Jerome Brunet <jbru...@baylibre.com> --- changes since v1: [1] * Moved reset_control_rearm after clk_disable_unprepare to clean things up in reverse order of initialization for phy: amlogic: meson drivers IMPORTANT: This patchset depends on this patch [2], it adds reset_control_rearm() call to the reset framework API, it has been approved by the maintainer, and will be applied to reset/next There is currently an immutable branch with it [3] [1]: https://lore.kernel.org/lkml/20201113000508.14702-1-aouledam...@baylibre.com/ [2]: https://lore.kernel.org/lkml/20201112230043.28987-1-aouledam...@baylibre.com/ [3]: git://git.pengutronix.de/git/pza/linux.git reset/shared-retrigger drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c index 43ec9bf24abf..1ddf5e5e4184 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -114,8 +114,10 @@ static int phy_meson_gxl_usb2_init(struct phy *phy) return ret; ret = clk_prepare_enable(priv->clk); - if (ret) + if (ret) { + reset_control_rearm(priv->reset); return ret; + } return 0; } @@ -125,6 +127,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy) struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); clk_disable_unprepare(priv->clk); + reset_control_rearm(priv->reset); return 0; } -- 2.17.1
