On Tue 01 Dec 09:37 CST 2020, Srinivas Kandagatla wrote:
> Add primary and tertinary mi2s pinconfs required to get I2S audio.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 98 ++++++++++++++++++++++++++++
> 1 file changed, 98 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 19dd7460e586..a87940e157be 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -1561,6 +1561,9 @@
> };
> };
>
> + sound: sound {
> + };
> +
> usb_1_hsphy: phy@88e3000 {
> compatible = "qcom,sm8250-usb-hs-phy",
> "qcom,usb-snps-hs-7nm-phy";
> @@ -1884,6 +1887,60 @@
> gpio-ranges = <&tlmm 0 0 180>;
> wakeup-parent = <&pdc>;
>
> + pri_mi2s_sck_active: pri-mi2s-sck-active {
> + mux {
As in patch 3, please make these state-centric and flatten the inner
subnode.
> + pins = "gpio138";
> + function = "mi2s0_sck";
> + };
> +
> + config {
> + pins = "gpio138";
> + drive-strength = <8>;
> + bias-disable;
> + output-high;
If function is mi2s0_sck is the output value relevant? Or should this
be dropped?
Regards,
Bjorn
> + };
> + };
> +
> + pri_mi2s_ws_active: pri-mi2s-ws-active {
> + mux {
> + pins = "gpio141";
> + function = "mi2s0_ws";
> + };
> +
> + config {
> + pins = "gpio141";
> + drive-strength = <8>;
> + output-high;
> + };
> + };
> +
> + pri_mi2s_sd0_active: pri-mi2s-sd0-active {
> + mux {
> + pins = "gpio139";
> + function = "mi2s0_data0";
> + };
> +
> + config {
> + pins = "gpio139";
> + drive-strength = <8>;
> + bias-disable;
> + output-high;
> + };
> + };
> +
> + pri_mi2s_sd1_active: pri-mi2s-sd1-active {
> + mux {
> + pins = "gpio140";
> + function = "mi2s0_data1";
> + };
> +
> + config {
> + pins = "gpio140";
> + drive-strength = <8>;
> + output-high;
> + };
> + };
> +
> qup_i2c0_default: qup-i2c0-default {
> mux {
> pins = "gpio28", "gpio29";
> @@ -2480,6 +2537,47 @@
> function = "qup18";
> };
> };
> +
> + tert_mi2s_sck_active: tert-mi2s-sck-active {
> + mux {
> + pins = "gpio133";
> + function = "mi2s2_sck";
> + };
> +
> + config {
> + pins = "gpio133";
> + drive-strength = <8>;
> + bias-disable;
> + output-high;
> + };
> + };
> +
> + tert_mi2s_sd0_active: tert-mi2s-sd0-active {
> + mux {
> + pins = "gpio134";
> + function = "mi2s2_data0";
> + };
> +
> + config {
> + pins = "gpio134";
> + drive-strength = <8>;
> + bias-disable;
> + output-high;
> + };
> + };
> +
> + tert_mi2s_ws_active: tert-mi2s-ws-active {
> + mux {
> + pins = "gpio135";
> + function = "mi2s2_ws";
> + };
> +
> + config {
> + pins = "gpio135";
> + drive-strength = <8>;
> + output-high;
> + };
> + };
> };
>
> apps_smmu: iommu@15000000 {
> --
> 2.21.0
>
