> -----Original Message-----
> From: Alexander Duyck <alexander.du...@gmail.com>
> Sent: Friday, December 4, 2020 15:27
> To: Limonciello, Mario
> Cc: Jeff Kirsher; Tony Nguyen; intel-wired-lan; LKML; Linux PM; Netdev; Jakub
> Kicinski; Sasha Netfin; Aaron Brown; Stefan Assmann; David Miller; David
> Arcari; Shen, Yijun; Yuan, Perry; anthony.w...@canonical.com
> Subject: Re: [PATCH v3 0/7] Improve s0ix flows for systems i219LM
>
>
> [EXTERNAL EMAIL]
>
> On Fri, Dec 4, 2020 at 12:09 PM Mario Limonciello
> <mario.limoncie...@dell.com> wrote:
> >
> > commit e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME
> systems")
> > disabled s0ix flows for systems that have various incarnations of the
> > i219-LM ethernet controller. This was done because of some regressions
> > caused by an earlier
> > commit 632fbd5eb5b0e ("e1000e: fix S0ix flows for cable connected case")
> > with i219-LM controller.
> >
> > Performing suspend to idle with these ethernet controllers requires a
> properly
> > configured system. To make enabling such systems easier, this patch
> > series allows determining if enabled and turning on using ethtool.
> >
> > The flows have also been confirmed to be configured correctly on Dell's
> Latitude
> > and Precision CML systems containing the i219-LM controller, when the kernel
> also
> > contains the fix for s0i3.2 entry previously submitted here and now part of
> this
> > series.
> > https://marc.info/?l=linux-netdev&m=160677194809564&w=2
> >
> > Patches 4 through 7 will turn the behavior on by default for some of Dell's
> > CML and TGL systems.
>
> The patches look good to me. Just need to address the minor issue that
> seems to have been present prior to the introduction of this patch
> set.
>
> Reviewed-by: Alexander Duyck <alexanderdu...@fb.com>
Thanks for your review. Just some operational questions - since this previously
existed do you want me to re-spin the series to a v4 for this, or should it be
a follow up after the series?
If I respin it, would you prefer that change to occur at the start or end
of the series?
