On Fri, 04 Dec 2020 20:20:42 +0200, Cristian Pop wrote:
> This adds device tree bindings for the AD5766 DAC.
>
> Signed-off-by: Cristian Pop <[email protected]>
> ---
> Changes in v2:
> - Add "additionalProperties: false" property
> - Remove blank line
> .../bindings/iio/dac/adi,ad5766.yaml | 53 +++++++++++++++++++
> 1 file changed, 53 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml: $id: relative
path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/iio/dac/adi,ad5766.yaml#
Documentation/devicetree/bindings/iio/dac/adi,ad5766.example.dts:21.13-23:
Warning (reg_format): /example-0/ad5766@0:reg: property has invalid length (4
bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/iio/dac/adi,ad5766.example.dt.yaml: Warning
(pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/dac/adi,ad5766.example.dt.yaml: Warning
(pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/dac/adi,ad5766.example.dt.yaml: Warning
(simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/dac/adi,ad5766.example.dt.yaml: Warning
(i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/dac/adi,ad5766.example.dt.yaml: Warning
(spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/dac/adi,ad5766.example.dt.yaml:
example-0: ad5766@0:reg:0: [0] is too short
From schema:
/usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
See https://patchwork.ozlabs.org/patch/1411214
The base for the patch is generally the last rc1. Any dependencies
should be noted.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
