Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This
patch is prepared for fu740 support.
Signed-off-by: Zong Li <zong...@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabb...@google.com>
Acked-by: Palmer Dabbelt <palmerdabb...@google.com>
Reviewed-by: Pragnesh Patel <pragnesh.pa...@sifive.com>
---
arch/riscv/Kconfig.socs | 2 +-
drivers/clk/sifive/Kconfig | 6 +++---
drivers/clk/sifive/Makefile | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 8a55f6156661..3284d5c291be 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -5,7 +5,7 @@ config SOC_SIFIVE
select SERIAL_SIFIVE if TTY
select SERIAL_SIFIVE_CONSOLE if TTY
select CLK_SIFIVE
- select CLK_SIFIVE_FU540_PRCI
+ select CLK_SIFIVE_PRCI
select SIFIVE_PLIC
help
This enables support for SiFive SoC platform hardware.
diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
index f3b4eb9cb0f5..ab48cf7e0105 100644
--- a/drivers/clk/sifive/Kconfig
+++ b/drivers/clk/sifive/Kconfig
@@ -8,12 +8,12 @@ menuconfig CLK_SIFIVE
if CLK_SIFIVE
-config CLK_SIFIVE_FU540_PRCI
- bool "PRCI driver for SiFive FU540 SoCs"
+config CLK_SIFIVE_PRCI
+ bool "PRCI driver for SiFive SoCs"
select CLK_ANALOGBITS_WRPLL_CLN28HPC
help
Supports the Power Reset Clock interface (PRCI) IP block found in
- FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
+ FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
enable this driver.
endif
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
index 627effe2ece1..fe3e2cb4c4d8 100644
--- a/drivers/clk/sifive/Makefile
+++ b/drivers/clk/sifive/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-y += sifive-prci.o
-obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o
+obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o
--
2.29.2
