On Tue, Dec 01, 2020 at 08:08:39PM -0800, Badhri Jagan Sridharan wrote:
> This change adds vbus_vsafe0v which when set, makes TCPM
> query for VSAFE0V by assigning the tcpc.is_vbus_vsafe0v callback.
> Also enables ALERT.ExtendedStatus which is triggered when
> status of EXTENDED_STATUS.vSafe0V changes.
> EXTENDED_STATUS.vSafe0V is set when vbus is at vSafe0V and
> cleared otherwise.
> 
> Signed-off-by: Badhri Jagan Sridharan <[email protected]>

Reviewed-by: Guenter Roeck <[email protected]>

> ---
> Changes since v1:
> - Removed logic for checking TCPC_POWER_STATUS_MASK reg
>   read in the irq handler. Sending that as a separate patch.
> ---
>  drivers/usb/typec/tcpm/tcpci.c | 39 +++++++++++++++++++++++++++++-----
>  drivers/usb/typec/tcpm/tcpci.h |  6 ++++++
>  2 files changed, 40 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
> index 12d983a75510..f938d9876ce9 100644
> --- a/drivers/usb/typec/tcpm/tcpci.c
> +++ b/drivers/usb/typec/tcpm/tcpci.c
> @@ -402,6 +402,19 @@ static int tcpci_get_vbus(struct tcpc_dev *tcpc)
>       return !!(reg & TCPC_POWER_STATUS_VBUS_PRES);
>  }
>  
> +static bool tcpci_is_vbus_vsafe0v(struct tcpc_dev *tcpc)
> +{
> +     struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> +     unsigned int reg;
> +     int ret;
> +
> +     ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &reg);
> +     if (ret < 0)
> +             return false;
> +
> +     return !!(reg & TCPC_EXTENDED_STATUS_VSAFE0V);
> +}
> +
>  static int tcpci_set_vbus(struct tcpc_dev *tcpc, bool source, bool sink)
>  {
>       struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> @@ -554,12 +567,22 @@ static int tcpci_init(struct tcpc_dev *tcpc)
>               TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_CC_STATUS;
>       if (tcpci->controls_vbus)
>               reg |= TCPC_ALERT_POWER_STATUS;
> +     /* Enable VSAFE0V status interrupt when detecting VSAFE0V is supported 
> */
> +     if (tcpci->data->vbus_vsafe0v) {
> +             reg |= TCPC_ALERT_EXTENDED_STATUS;
> +             ret = regmap_write(tcpci->regmap, TCPC_EXTENDED_STATUS_MASK,
> +                                TCPC_EXTENDED_STATUS_VSAFE0V);
> +             if (ret < 0)
> +                     return ret;
> +     }
>       return tcpci_write16(tcpci, TCPC_ALERT_MASK, reg);
>  }
>  
>  irqreturn_t tcpci_irq(struct tcpci *tcpci)
>  {
>       u16 status;
> +     int ret;
> +     unsigned int raw;
>  
>       tcpci_read16(tcpci, TCPC_ALERT, &status);
>  
> @@ -575,15 +598,12 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci)
>               tcpm_cc_change(tcpci->port);
>  
>       if (status & TCPC_ALERT_POWER_STATUS) {
> -             unsigned int reg;
> -
> -             regmap_read(tcpci->regmap, TCPC_POWER_STATUS_MASK, &reg);
> -
> +             regmap_read(tcpci->regmap, TCPC_POWER_STATUS_MASK, &raw);
>               /*
>                * If power status mask has been reset, then the TCPC
>                * has reset.
>                */
> -             if (reg == 0xff)
> +             if (raw == 0xff)
>                       tcpm_tcpc_reset(tcpci->port);
>               else
>                       tcpm_vbus_change(tcpci->port);
> @@ -622,6 +642,12 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci)
>               tcpm_pd_receive(tcpci->port, &msg);
>       }
>  
> +     if (status & TCPC_ALERT_EXTENDED_STATUS) {
> +             ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &raw);
> +             if (!ret && (raw & TCPC_EXTENDED_STATUS_VSAFE0V))
> +                     tcpm_vbus_change(tcpci->port);
> +     }
> +
>       if (status & TCPC_ALERT_RX_HARD_RST)
>               tcpm_pd_hard_reset(tcpci->port);
>  
> @@ -699,6 +725,9 @@ struct tcpci *tcpci_register_port(struct device *dev, 
> struct tcpci_data *data)
>                       tcpci_set_auto_vbus_discharge_threshold;
>       }
>  
> +     if (tcpci->data->vbus_vsafe0v)
> +             tcpci->tcpc.is_vbus_vsafe0v = tcpci_is_vbus_vsafe0v;
> +
>       err = tcpci_parse_config(tcpci);
>       if (err < 0)
>               return ERR_PTR(err);
> diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
> index 3fe313655f0c..116a69c85e38 100644
> --- a/drivers/usb/typec/tcpm/tcpci.h
> +++ b/drivers/usb/typec/tcpm/tcpci.h
> @@ -49,6 +49,9 @@
>  #define TCPC_TCPC_CTRL_ORIENTATION   BIT(0)
>  #define TCPC_TCPC_CTRL_BIST_TM               BIT(1)
>  
> +#define TCPC_EXTENDED_STATUS         0x20
> +#define TCPC_EXTENDED_STATUS_VSAFE0V BIT(0)
> +
>  #define TCPC_ROLE_CTRL                       0x1a
>  #define TCPC_ROLE_CTRL_DRP           BIT(6)
>  #define TCPC_ROLE_CTRL_RP_VAL_SHIFT  4
> @@ -155,11 +158,14 @@ struct tcpci;
>   *           is sourcing vbus.
>   * @auto_discharge_disconnect:
>   *           Optional; Enables TCPC to autonously discharge vbus on 
> disconnect.
> + * @vbus_vsafe0v:
> + *           optional; Set when TCPC can detect whether vbus is at VSAFE0V.
>   */
>  struct tcpci_data {
>       struct regmap *regmap;
>       unsigned char TX_BUF_BYTE_x_hidden:1;
>       unsigned char auto_discharge_disconnect:1;
> +     unsigned char vbus_vsafe0v:1;
>  
>       int (*init)(struct tcpci *tcpci, struct tcpci_data *data);
>       int (*set_vconn)(struct tcpci *tcpci, struct tcpci_data *data,
> -- 
> 2.29.2.576.ga3fc446d84-goog
> 

Reply via email to