From: Franck LENORMAND <franck.lenorm...@oss.nxp.com> This patchset aims to add support for the SECurity VIOlation (SECVIO) of the SNVS. A secvio is a signal emitted by the SNVS when a hardware attack is detected. On imx8x and imx8q SoC, the SNVS is controlled by the SECO and it is possible to interact with it using the SCU using the SC APIs.
For the driver to communicate with the SNVS via the SCU and the SECO, I had to: - Add support for exchange of big message with the SCU (needed for imx_scu_irq_get_status) - Add API to check linux can control the SECVIO (imx_sc_rm_is_resource_owned) - Add APIs for the driver to read the state of the SECVIO registers of the SNVS and DGO (imx_sc_seco_secvio_enable and imx_sc_seco_secvio_enable). To check the state of the SECVIO IRQ in the SCU, I added the imx_scu_irq_get_status API. The secvio driver is designed to receive the IRQ produced by the SNVS in case of hardware attack and notify the status to the audit framework which can be used by the user. The goal of the driver is to be self suficient but can be extended by the user to perform custom operations on values read (imx_sc_seco_secvio_enable) v2: - Removed (firmware: imx: scu-rm: Add Resource Management APIs) -> Code required is already present - Removed (firmware: imx: scu: Support reception of messages of any size) -> The imx-scu is already working in fast-ipc mode - (soc: imx8: Add the SC SECVIO driver): - Fixed the warnings reported by kernel test robot v3: Apply review from Aisheng - Fixed the "SECurity VIOlation" to "security violation" - (firmware: imx: scu-seco: Add Secure Controller APIS): - Rewrite doc of return error code - Rework request and response structure into one - (firmware: imx: scu-irq: Add API to retrieve status of IRQ): - Rewrite doc of return error code - Rework imx_scu_irq_work_handler to use added imx_scu_irq_get_status - (dt-bindings: arm: imx: Documentation of the SC secvio driver): - Use reference of nvmem v4: Fix build warning raised by kernel test robot - (soc: imx8: Add the SC SECVIO driver) - Remove unused variable "data" in int_imx_secvio_sc_disable_irq() - Place "static" keyword before const - Add include of internal header to imx-secvio-audit.c for proper definition of report_to_audit_notify Franck LENORMAND (5): firmware: imx: scu-seco: Add Secure Controller APIS firmware: imx: scu-irq: Add API to retrieve status of IRQ dt-bindings: firmware: imx-scu: Add SECVIO resource dt-bindings: arm: imx: Documentation of the SC secvio driver soc: imx8: Add the SC SECVIO driver .../bindings/arm/freescale/fsl,imx-sc-secvio.yaml | 34 + drivers/firmware/imx/Makefile | 2 +- drivers/firmware/imx/imx-scu-irq.c | 48 +- drivers/firmware/imx/imx-scu.c | 8 +- drivers/firmware/imx/seco.c | 253 ++++++ drivers/soc/imx/Kconfig | 10 + drivers/soc/imx/Makefile | 1 + drivers/soc/imx/secvio/Kconfig | 10 + drivers/soc/imx/secvio/Makefile | 3 + drivers/soc/imx/secvio/imx-secvio-audit.c | 40 + drivers/soc/imx/secvio/imx-secvio-debugfs.c | 379 +++++++++ drivers/soc/imx/secvio/imx-secvio-sc-int.h | 84 ++ drivers/soc/imx/secvio/imx-secvio-sc.c | 855 +++++++++++++++++++++ include/dt-bindings/firmware/imx/rsrc.h | 3 +- include/linux/firmware/imx/ipc.h | 1 + include/linux/firmware/imx/sci.h | 5 + include/linux/firmware/imx/svc/seco.h | 73 ++ include/soc/imx/imx-secvio-sc.h | 177 +++++ 18 files changed, 1968 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx-sc-secvio.yaml create mode 100644 drivers/firmware/imx/seco.c create mode 100644 drivers/soc/imx/secvio/Kconfig create mode 100644 drivers/soc/imx/secvio/Makefile create mode 100644 drivers/soc/imx/secvio/imx-secvio-audit.c create mode 100644 drivers/soc/imx/secvio/imx-secvio-debugfs.c create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc-int.h create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc.c create mode 100644 include/linux/firmware/imx/svc/seco.h create mode 100644 include/soc/imx/imx-secvio-sc.h -- 2.7.4