On 11/12/2020 01:23:57+0100, Thomas Gleixner wrote: > Alexandre, > > On Fri, Dec 11 2020 at 00:59, Alexandre Belloni wrote: > > On 06/12/2020 22:46:17+0100, Thomas Gleixner wrote: > >> /* Drivers can revise this default after allocating the device. */ > >> - rtc->set_offset_nsec = NSEC_PER_SEC / 2; > >> + rtc->set_offset_nsec = 10 * NSEC_PER_MSEC; > > > > I did retest, on a slow 100kHz i2c bus, with a fairly inconvenient RTC, > > The maximum offset to set the RTC was 4845533ns so I'd say 10ms is too > > large. Should we make that 5ms ? > > Sure. As I said I pulled the 10 out of thin air. > > > Apart from that, on the series, you can add my > > Acked-by: Alexandre Belloni <alexandre.bell...@bootlin.com> > > I'll amend the s/10/5/ throughout the series while queueing the whole > pile in the timers/core branch unless you want it to be handled > differently. >
That's fine for me. -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
